Yuan Fang, Zhen-min Wang, Qing-xiang Yang, Yun-kun Zhang, Li-gang Liu, Hong-yan Hu, and Yue Zhang, Numerical simulation of the temperature fields of stainless steel with different roller parameters during twin-roll strip casting, Int. J. Miner. Metall. Mater., 16(2009), No. 3, pp. 304-308. https://doi.org/10.1016/S1674-4799(09)60054-6
Cite this article as:
Yuan Fang, Zhen-min Wang, Qing-xiang Yang, Yun-kun Zhang, Li-gang Liu, Hong-yan Hu, and Yue Zhang, Numerical simulation of the temperature fields of stainless steel with different roller parameters during twin-roll strip casting, Int. J. Miner. Metall. Mater., 16(2009), No. 3, pp. 304-308. https://doi.org/10.1016/S1674-4799(09)60054-6
Yuan Fang, Zhen-min Wang, Qing-xiang Yang, Yun-kun Zhang, Li-gang Liu, Hong-yan Hu, and Yue Zhang, Numerical simulation of the temperature fields of stainless steel with different roller parameters during twin-roll strip casting, Int. J. Miner. Metall. Mater., 16(2009), No. 3, pp. 304-308. https://doi.org/10.1016/S1674-4799(09)60054-6
Citation:
Yuan Fang, Zhen-min Wang, Qing-xiang Yang, Yun-kun Zhang, Li-gang Liu, Hong-yan Hu, and Yue Zhang, Numerical simulation of the temperature fields of stainless steel with different roller parameters during twin-roll strip casting, Int. J. Miner. Metall. Mater., 16(2009), No. 3, pp. 304-308. https://doi.org/10.1016/S1674-4799(09)60054-6
School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China
Key Laboratory of Metastable Materials Science & Technology, College of Materials Science and Engineering, Yanshan University, Qinhuangdao 066004, China
The temperature field of stainless steel during twin-roll strip casting was simulated by experiment and a finite element (FE) model. By comparing the measured result with the simulated values, it is found that they fit close to each other, which indicates this FE model is effective. Based on this model, the effects of roll gap (t) and roll radius (R) on solidification were simulated. The simulated results give the relationship between t or R and the position of the freezing point. The larger the t is and the smaller the R is, the closer the position of the freezing point is to the exit.
School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China
Key Laboratory of Metastable Materials Science & Technology, College of Materials Science and Engineering, Yanshan University, Qinhuangdao 066004, China
The temperature field of stainless steel during twin-roll strip casting was simulated by experiment and a finite element (FE) model. By comparing the measured result with the simulated values, it is found that they fit close to each other, which indicates this FE model is effective. Based on this model, the effects of roll gap (t) and roll radius (R) on solidification were simulated. The simulated results give the relationship between t or R and the position of the freezing point. The larger the t is and the smaller the R is, the closer the position of the freezing point is to the exit.
下载: