Yue-long Bai, Jun Xu, Zhi-feng Zhang, Wei-min Mao, and Hong Xu, Numerical simulation on the rheo-diecasting of the semi-solid A356 aluminum alloy, Int. J. Miner. Metall. Mater., 16(2009), No. 4, pp. 422-426. https://doi.org/10.1016/S1674-4799(09)60074-1
Cite this article as:
Yue-long Bai, Jun Xu, Zhi-feng Zhang, Wei-min Mao, and Hong Xu, Numerical simulation on the rheo-diecasting of the semi-solid A356 aluminum alloy, Int. J. Miner. Metall. Mater., 16(2009), No. 4, pp. 422-426. https://doi.org/10.1016/S1674-4799(09)60074-1
Yue-long Bai, Jun Xu, Zhi-feng Zhang, Wei-min Mao, and Hong Xu, Numerical simulation on the rheo-diecasting of the semi-solid A356 aluminum alloy, Int. J. Miner. Metall. Mater., 16(2009), No. 4, pp. 422-426. https://doi.org/10.1016/S1674-4799(09)60074-1
Citation:
Yue-long Bai, Jun Xu, Zhi-feng Zhang, Wei-min Mao, and Hong Xu, Numerical simulation on the rheo-diecasting of the semi-solid A356 aluminum alloy, Int. J. Miner. Metall. Mater., 16(2009), No. 4, pp. 422-426. https://doi.org/10.1016/S1674-4799(09)60074-1
The effect of injection pressure, piston velocity, and the forming temperature of semisolid slurry on the filling behavior of the semi-solid A356 aluminum alloy was investigated by simulation methods. The simulation results show that these processing parameters have an important effect on the filling behavior of the semi-solid A356 aluminum alloy. The slurry flows steadily in the cavity when the injection pressure, the piston velocity, and the forming temperature are low, but it is prone to turbulent flow when the injection pressure, the piston velocity, and the forming temperature are much higher. Therefore it is necessary to determine the appropriate processing parameters to get a steady flow of the slurry in the cavity.
The effect of injection pressure, piston velocity, and the forming temperature of semisolid slurry on the filling behavior of the semi-solid A356 aluminum alloy was investigated by simulation methods. The simulation results show that these processing parameters have an important effect on the filling behavior of the semi-solid A356 aluminum alloy. The slurry flows steadily in the cavity when the injection pressure, the piston velocity, and the forming temperature are low, but it is prone to turbulent flow when the injection pressure, the piston velocity, and the forming temperature are much higher. Therefore it is necessary to determine the appropriate processing parameters to get a steady flow of the slurry in the cavity.
下载: