Dekun Zhang, Shirong Ge, and Dangsheng Xiong, Fretting wear of steel wires in hoisting ropes, J. Univ. Sci. Technol. Beijing, 9(2002), No. 2, pp. 81-84.
Cite this article as:
Dekun Zhang, Shirong Ge, and Dangsheng Xiong, Fretting wear of steel wires in hoisting ropes, J. Univ. Sci. Technol. Beijing, 9(2002), No. 2, pp. 81-84.
Dekun Zhang, Shirong Ge, and Dangsheng Xiong, Fretting wear of steel wires in hoisting ropes, J. Univ. Sci. Technol. Beijing, 9(2002), No. 2, pp. 81-84.
Citation:
Dekun Zhang, Shirong Ge, and Dangsheng Xiong, Fretting wear of steel wires in hoisting ropes, J. Univ. Sci. Technol. Beijing, 9(2002), No. 2, pp. 81-84.
To investigate the fretting wear of steel wires in hoisting ropes, specimens were made of 6×19 point contact ropes. A model for the fretting wear was developed and a fretting wear test rig was deigned in laboratory. A series of experiments were performed on this test rig.The wear volume was taken as a characteristic parameter to describe the fretting wear in relation to the contact load, reciprocating cycles and amplitude. Moreover, the wear mechanisms were discussedin the fretting process.
To investigate the fretting wear of steel wires in hoisting ropes, specimens were made of 6×19 point contact ropes. A model for the fretting wear was developed and a fretting wear test rig was deigned in laboratory. A series of experiments were performed on this test rig.The wear volume was taken as a characteristic parameter to describe the fretting wear in relation to the contact load, reciprocating cycles and amplitude. Moreover, the wear mechanisms were discussedin the fretting process.