ZHENG Chunand GU Tong, Temperature distribution in the tool-chip-workpiece system during the orthogonal cutting process, J. Univ. Sci. Technol. Beijing, 4(1997), No. 3, pp. 30-34.
Cite this article as:
ZHENG Chunand GU Tong, Temperature distribution in the tool-chip-workpiece system during the orthogonal cutting process, J. Univ. Sci. Technol. Beijing, 4(1997), No. 3, pp. 30-34.
ZHENG Chunand GU Tong, Temperature distribution in the tool-chip-workpiece system during the orthogonal cutting process, J. Univ. Sci. Technol. Beijing, 4(1997), No. 3, pp. 30-34.
Citation:
ZHENG Chunand GU Tong, Temperature distribution in the tool-chip-workpiece system during the orthogonal cutting process, J. Univ. Sci. Technol. Beijing, 4(1997), No. 3, pp. 30-34.
Department of Mechanical Engineering, McMaster University, Canada
Applied Science School, University of Science and Technology Beijing, Beijing 100083, China
中文摘要
The temperature distribution in the tool, chip and workpiece was studied during the orthogonal cutting process Under several different cutting conditions. The temperature distribution is calculated by the finite difference method. and the variation of the material properties with temperature was taken was taken into account The results obtained are coincident with both previous published results and experimental measurements.
The temperature distribution in the tool, chip and workpiece was studied during the orthogonal cutting process Under several different cutting conditions. The temperature distribution is calculated by the finite difference method. and the variation of the material properties with temperature was taken was taken into account The results obtained are coincident with both previous published results and experimental measurements.
下载: