Shanwu Yang, Shaoqiang Yuan, Xuemin Wang, Huibin Wu, and Xinlai He, Behavior of precipitation in bainitic steel during relaxation processing of RPC technique, J. Univ. Sci. Technol. Beijing, 11(2004), No. 3, pp. 230-234.
Cite this article as:
Shanwu Yang, Shaoqiang Yuan, Xuemin Wang, Huibin Wu, and Xinlai He, Behavior of precipitation in bainitic steel during relaxation processing of RPC technique, J. Univ. Sci. Technol. Beijing, 11(2004), No. 3, pp. 230-234.
Shanwu Yang, Shaoqiang Yuan, Xuemin Wang, Huibin Wu, and Xinlai He, Behavior of precipitation in bainitic steel during relaxation processing of RPC technique, J. Univ. Sci. Technol. Beijing, 11(2004), No. 3, pp. 230-234.
Citation:
Shanwu Yang, Shaoqiang Yuan, Xuemin Wang, Huibin Wu, and Xinlai He, Behavior of precipitation in bainitic steel during relaxation processing of RPC technique, J. Univ. Sci. Technol. Beijing, 11(2004), No. 3, pp. 230-234.
Thermal simulation test, TEM (Transmission Electron Microscope) and nanobeam EDS (Energy Dispersed x-ray Spectrum) techniques were used to investigate the precipitation behavior of Nb, Ti, Mo etc. In HSLA (High Strength Low Alloy) steel.The strain induced precipitation occurred during the isothermal relaxation stage after deformed in the non-recrystallization temperature region. After 30% predeformation at 850 and 900℃, there are two kinds of particles, (Ti,Nb)(C,N) and a few Nb(C,N), to precipitate during holding. The content of Nb in particles rises with the relaxation time increasing. During the final holding stage, some Nb and Ti atoms in the lattice sites of the precipitates would be replaced by Mo atoms, and the Mo content in the precipitates increases with the relaxation time. The results were compared with the refinement effect of microstructures caused by relaxationprecipitation controlling transformation (RPC) processing.
Thermal simulation test, TEM (Transmission Electron Microscope) and nanobeam EDS (Energy Dispersed x-ray Spectrum) techniques were used to investigate the precipitation behavior of Nb, Ti, Mo etc. In HSLA (High Strength Low Alloy) steel.The strain induced precipitation occurred during the isothermal relaxation stage after deformed in the non-recrystallization temperature region. After 30% predeformation at 850 and 900℃, there are two kinds of particles, (Ti,Nb)(C,N) and a few Nb(C,N), to precipitate during holding. The content of Nb in particles rises with the relaxation time increasing. During the final holding stage, some Nb and Ti atoms in the lattice sites of the precipitates would be replaced by Mo atoms, and the Mo content in the precipitates increases with the relaxation time. The results were compared with the refinement effect of microstructures caused by relaxationprecipitation controlling transformation (RPC) processing.
下载: