Peng Zhang, Yunhui Du, and Xueping Ren, Modeling and Optimizing of Deformed Steel Bars Hot Rolling, J. Univ. Sci. Technol. Beijing, 6(1999), No. 4, pp. 289-291.
Cite this article as:
Peng Zhang, Yunhui Du, and Xueping Ren, Modeling and Optimizing of Deformed Steel Bars Hot Rolling, J. Univ. Sci. Technol. Beijing, 6(1999), No. 4, pp. 289-291.
Peng Zhang, Yunhui Du, and Xueping Ren, Modeling and Optimizing of Deformed Steel Bars Hot Rolling, J. Univ. Sci. Technol. Beijing, 6(1999), No. 4, pp. 289-291.
Citation:
Peng Zhang, Yunhui Du, and Xueping Ren, Modeling and Optimizing of Deformed Steel Bars Hot Rolling, J. Univ. Sci. Technol. Beijing, 6(1999), No. 4, pp. 289-291.
Material Science and Engineering School, University of Science and Technology Beijing, Beijing 100083
中文摘要
Based on experimental data, a nonlinear model about tensile strength and technical parameters such as Mn and St content, finishing rolling speed and finishing rolling temperature for deformed steel bars in the process of hot rolling was established by using artificial neural networks. The model can be optimized with a genetic algorithm. The optimum rolling parameters were obtained.
Based on experimental data, a nonlinear model about tensile strength and technical parameters such as Mn and St content, finishing rolling speed and finishing rolling temperature for deformed steel bars in the process of hot rolling was established by using artificial neural networks. The model can be optimized with a genetic algorithm. The optimum rolling parameters were obtained.
下载: