Li Peng, Qing Li, Wen Li, and Shufen Li, NN adaptive pole placement method for sintering finish point control, J. Univ. Sci. Technol. Beijing, 11(2004), No. 5, pp. 477-479.
Cite this article as:
Li Peng, Qing Li, Wen Li, and Shufen Li, NN adaptive pole placement method for sintering finish point control, J. Univ. Sci. Technol. Beijing, 11(2004), No. 5, pp. 477-479.
Li Peng, Qing Li, Wen Li, and Shufen Li, NN adaptive pole placement method for sintering finish point control, J. Univ. Sci. Technol. Beijing, 11(2004), No. 5, pp. 477-479.
Citation:
Li Peng, Qing Li, Wen Li, and Shufen Li, NN adaptive pole placement method for sintering finish point control, J. Univ. Sci. Technol. Beijing, 11(2004), No. 5, pp. 477-479.
A neural network model with a special structure, which is divided into linear and nonlinear parts, was proposed for identification of a nonlinear system. In this model, the nonlinear part of the object is treated as a measured disturbance, and is compensated by a feed forward method; an adaptive pole placement algorithm is used to control the linear part of the object. The simulation results show that the identification efficiency and accuracy are improved when the new controller is applied to sintering finish point control.
A neural network model with a special structure, which is divided into linear and nonlinear parts, was proposed for identification of a nonlinear system. In this model, the nonlinear part of the object is treated as a measured disturbance, and is compensated by a feed forward method; an adaptive pole placement algorithm is used to control the linear part of the object. The simulation results show that the identification efficiency and accuracy are improved when the new controller is applied to sintering finish point control.
下载: