3-D Finite-Element Numerical Simulation of Centrifugal Induction Electrosalg Casting Solidification Process

Xichun Chen; Deguang Zhou; Jie Fu; Weiguo Xu

Volume 8 Issue 4

Dec. 2001

Turn off MathJax

数据统计

计量

文章访问数: 212
HTML全文浏览量: 58
PDF下载量: 7
被引次数: 0

文章导航 > 矿物冶金与材料学报（英文） > 2001 > 8(4): 254-258

Xichun Chen, Deguang Zhou, Jie Fu, and Weiguo Xu, 3-D Finite-Element Numerical Simulation of Centrifugal Induction Electrosalg Casting Solidification Process, J. Univ. Sci. Technol. Beijing, 8(2001), No. 4, pp. 254-258.

Cite this article as:

Xichun Chen, Deguang Zhou, Jie Fu, and Weiguo Xu, 3-D Finite-Element Numerical Simulation of Centrifugal Induction Electrosalg Casting Solidification Process, J. Univ. Sci. Technol. Beijing, 8(2001), No. 4, pp. 254-258.

Citation:

PDF( 1728 KB)

引用本文 PDF XML SpringerLink

Metallurgy

3-D Finite-Element Numerical Simulation of Centrifugal Induction Electrosalg Casting Solidification Process

Metallurgy School, University of Science and Technology Beijing, Beijing 100083, China

中文摘要

A 3-D finite-element numerical simulation model of temperature field for CIESC casting solidification process was developed with the aid of ANSYS software and a series of corresponding experiments were made. The results showed that the good agreement was obtained between the numerical simulation and the experiments. Based on the numerical simulation results, the characteristics of temperature distribution in the castings during CIESC solidification process were analyzed and summarized. According to the G/R^1/2 method and numerical simulation results, there is no any shrinkage defect in the CIESC casting and structure or casting is fine and compact.

关键词:

3-D finite-element numerical simulation;
ANSYS software;
solidification process;
centrifugal induction electroslag casting（CIESC）;
shrinkage defect

Metallurgy

3-D Finite-Element Numerical Simulation of Centrifugal Induction Electrosalg Casting Solidification Process

+ Author Affiliations

Abstract

Abstract

A 3-D finite-element numerical simulation model of temperature field for CIESC casting solidification process was developed with the aid of ANSYS software and a series of corresponding experiments were made. The results showed that the good agreement was obtained between the numerical simulation and the experiments. Based on the numerical simulation results, the characteristics of temperature distribution in the castings during CIESC solidification process were analyzed and summarized. According to the G/R^1/2 method and numerical simulation results, there is no any shrinkage defect in the CIESC casting and structure or casting is fine and compact.
- 3-D finite-element numerical simulation;
- ANSYS software;
- solidification process;
- centrifugal induction electroslag casting（CIESC）;
- shrinkage defect