Kazuya Kurokawa, Makoto Ube, Hideaki Takahashi, and Heishichiro Takahashi, Fabrication of MoSi2-SiC Composites by a Spark Plasma Sintering Method, J. Univ. Sci. Technol. Beijing, 6(1999), No. 2, pp. 116-118.
Cite this article as:
Kazuya Kurokawa, Makoto Ube, Hideaki Takahashi, and Heishichiro Takahashi, Fabrication of MoSi2-SiC Composites by a Spark Plasma Sintering Method, J. Univ. Sci. Technol. Beijing, 6(1999), No. 2, pp. 116-118.
Kazuya Kurokawa, Makoto Ube, Hideaki Takahashi, and Heishichiro Takahashi, Fabrication of MoSi2-SiC Composites by a Spark Plasma Sintering Method, J. Univ. Sci. Technol. Beijing, 6(1999), No. 2, pp. 116-118.
Citation:
Kazuya Kurokawa, Makoto Ube, Hideaki Takahashi, and Heishichiro Takahashi, Fabrication of MoSi2-SiC Composites by a Spark Plasma Sintering Method, J. Univ. Sci. Technol. Beijing, 6(1999), No. 2, pp. 116-118.
Division of Molecular Chemistry, Graduate School of Engineering, Hokkaido University, Kita-13, Nishi-8, Kita-ku, Sapporo 060-8628, Japan
Center for Advanced Research of Energy Technology, Hokkaido University, Japan
中文摘要
Fully dense MoSi2-SiC composites were fabricated from the mixed powder of the elemental constituents by a spark plasma sintering method. The sintering and densification of the Mo-Si-C mixed powder are accomplished through three processes. In particular, it proceeds rapidly by the formation of MoSi2. The most suitable temperature for the fabrication of MoSi2-SiC composites depends on the content of SiC and increases with the content of SiC increasing. As a result, fully dense MoSi2-SiC composites can be prepared without difficulty by a spark plasma sintering method.
Fully dense MoSi2-SiC composites were fabricated from the mixed powder of the elemental constituents by a spark plasma sintering method. The sintering and densification of the Mo-Si-C mixed powder are accomplished through three processes. In particular, it proceeds rapidly by the formation of MoSi2. The most suitable temperature for the fabrication of MoSi2-SiC composites depends on the content of SiC and increases with the content of SiC increasing. As a result, fully dense MoSi2-SiC composites can be prepared without difficulty by a spark plasma sintering method.
下载: