Xinhua Wang, Zhiyuan Zhu, Li Zhang, and Guodong Xu, Longitudinal surface cracks on continuous casting slabs of P and Cu containing container steel, J. Univ. Sci. Technol. Beijing, 10(2003), No. 4, pp. 16-19.
Cite this article as:
Xinhua Wang, Zhiyuan Zhu, Li Zhang, and Guodong Xu, Longitudinal surface cracks on continuous casting slabs of P and Cu containing container steel, J. Univ. Sci. Technol. Beijing, 10(2003), No. 4, pp. 16-19.
Xinhua Wang, Zhiyuan Zhu, Li Zhang, and Guodong Xu, Longitudinal surface cracks on continuous casting slabs of P and Cu containing container steel, J. Univ. Sci. Technol. Beijing, 10(2003), No. 4, pp. 16-19.
Citation:
Xinhua Wang, Zhiyuan Zhu, Li Zhang, and Guodong Xu, Longitudinal surface cracks on continuous casting slabs of P and Cu containing container steel, J. Univ. Sci. Technol. Beijing, 10(2003), No. 4, pp. 16-19.
The fact that the amount of the mold flux components differs at different locations on the cracking surface indicates that the longitudinal surface cracks are initially formed in the mold and are enlarged in the secondary cooling zone. Based on the hot ductility measurement of two typical container used steels, it is known that the steels are in severe embrittlement state in the temperature range of 825-775℃. By means of increasing Cr/Ni plating thickness on the upper part of the mold, reducing mold heat flux, adopting new secondary cooling pattern, etc., the occurrence of the surface longitudinal cracks on the steel CC (continuous casting) slabs has been significantly reduced.
The fact that the amount of the mold flux components differs at different locations on the cracking surface indicates that the longitudinal surface cracks are initially formed in the mold and are enlarged in the secondary cooling zone. Based on the hot ductility measurement of two typical container used steels, it is known that the steels are in severe embrittlement state in the temperature range of 825-775℃. By means of increasing Cr/Ni plating thickness on the upper part of the mold, reducing mold heat flux, adopting new secondary cooling pattern, etc., the occurrence of the surface longitudinal cracks on the steel CC (continuous casting) slabs has been significantly reduced.
下载: