Metallurgy School, University of Science and Technology Beijing, Beijing 100083, China
中文摘要
SeveraL parameters affecting slag splashing in LD converter have been discussed. Using parffin and starch model, a simulated test about 30 t converter has been made in laboratory and the modified Frode number was chosen as the main similar basis of the system. It was results that the optimized slag splashing parameters was obtained through data treatment The nitrogen gas flow rate is about 8 500 m3/h, the splashing time is of 3 min, and the lance height is of 0.8 m. It is necessary to add MgO or carbon into the slag to adjusting slag composition. Also, it is difficult for the splashed slag condensing on the line when the slag temperature is much higher
SeveraL parameters affecting slag splashing in LD converter have been discussed. Using parffin and starch model, a simulated test about 30 t converter has been made in laboratory and the modified Frode number was chosen as the main similar basis of the system. It was results that the optimized slag splashing parameters was obtained through data treatment The nitrogen gas flow rate is about 8 500 m3/h, the splashing time is of 3 min, and the lance height is of 0.8 m. It is necessary to add MgO or carbon into the slag to adjusting slag composition. Also, it is difficult for the splashed slag condensing on the line when the slag temperature is much higher