International Journal of Minerals, Metallurgy and Materials

Wenxin Zhao, Meng Zhang, Yukun Miao, Chang Wang, Anguo Cui, Liying Yuan, Zeqing Miao, Xiaoqing Wang, Zhibo Wang, Haoyu Pang, Alan Meng, Zhenjiang Li, and Ting Wang

, doi: 10.1007/s12613-024-2911-y

中文摘要(57) PDF(4) SpringerLink

摘要:

研究论文

Al3+ doped CeO2 for proton-conducting fuel cells

Sarfraz, Shahzad Rasool, Muhammad Khalid , M.A.K. Yousaf Shah, Bin Zhu , Jung Sik-Kim , Muhammad Imran Asghar, Nabeela Akbar, and Wenjing Dong

, doi: 10.1007/s12613-024-2910-z

中文摘要(119) PDF(11) SpringerLink

摘要:

研究论文

Enhanced ferroelectric and improved leakage of BFO-based thin films through increasing entropy strategy

Dongfei Lu, Guoqiang Xi, Hangren Li, Jie Tu, Xiuqiao Liu, Xudong Liu, Jianjun Tian, and Linxing Zhang

, doi: 10.1007/s12613-024-2915-7

中文摘要(28) PDF(1) SpringerLink

摘要:

研究论文

Instrumented oscillographic study of impact toughness of an axle steel DZ2 with different tempering temperatures

Shuo Liu, Peng Zhang, Bin Wang, Kaizhong Wang, Zikuan Xu, Fangzhong Hu, Xin Bai, Qiqiang Duan, and Zhefeng Zhang

, doi: 10.1007/s12613-024-2908-6

中文摘要(28) PDF(2) SpringerLink

摘要:

研究论文

Highly mass activity electrocatalysts with ultra-low Pt loading on carbon black for hydrogen evolution reaction

Shaorou Ke, Yajing Zhao, Xin Min, Yanghong Li, Ruiyu Mi, Yangai Liu, Xiaowen Wu, Minghao Fang, and Zhaohui Huang

, doi: 10.1007/s12613-024-2912-x

中文摘要(44) PDF(6) SpringerLink

摘要:

研究论文

Evolution of non-metallic inclusions in 80-tonne 9CrMoCoB large-scale ingots during electroslag remelting (ESR) process

Shengchao Duan, Min Joo Lee, Yao Su, Wangzhong Mu, Dong Soo Kim, and Joo Hyun Park

, doi: 10.1007/s12613-024-2905-9

中文摘要(87) PDF(10) SpringerLink

摘要:

研究论文

Behavior and mechanism of pre-oxidation improvement on fluidization in the fluidized reduction of titanomagnetite

Haoyan Sun, Ajala Adewole Adetoro, zhiqiang Wang, and Qingshan Zhu

, doi: 10.1007/s12613-024-2904-x

中文摘要(55) PDF(3) SpringerLink

摘要:

研究论文

Study on structure and corrosion behavior of FeCoCrNiMo high-entropy alloy coatings prepared by mechanical alloying and plasma spraying

Yun Tian, Jianing Liu, Mingming Xue, Dongyao Zhang, Yuxin Wang, Keping Geng, Yanchun Dong, and Yong Yang

, doi: 10.1007/s12613-024-2902-z

中文摘要(40) PDF(5) SpringerLink

摘要:

研究论文

Alkyl chain modulation of asymmetric hexacyclic fused acceptor synergistically with wide bandgap third component for high efficiency ternary organic solar cells

Shufang Li, Huilan Guan, Can Zhu, Chaoyuan Sun, Qingya Wei, Jun Yuan, and Yingping Zou

, doi: 10.1007/s12613-024-2903-y

中文摘要(47) PDF(4) SpringerLink

摘要:

研究论文

Theory, technology and application of grouted bolting in soft rock roadways of deep coal mines

Hongpu Kang, Jianwei Yang, Pengfei Jiang, Fuqiang Gao, Wenzhou Li, Jiafeng Li, and Huiyuan Chen

, doi: 10.1007/s12613-024-2906-8

中文摘要(47) PDF(4) SpringerLink

摘要:

研究论文

High-temperature corrosion of sintered RE₂Si₂O₇ (RE = Yb, Ho) environmental barrier coating materials by volcanic ash

Ayahisa Okawa, Son Thanh Nguyen, Tadachika Nakayama, Thi-Mai-Dung Do, Hisayuki Suematsu, Shu Yin, Takuya Hasegawa, Tsuneo Suzuki, Takashi Goto, and Koichi Niihara

, doi: 10.1007/s12613-024-2899-3

中文摘要(92) PDF(9) SpringerLink

摘要:

特约综述

Review on the design of high-strength and hydrogen embrittlement resistant steels

Zhiyu Du, Rongjian Shi, Xingyu Peng, Kewei Gao, and Xiaolu Pang

, doi: 10.1007/s12613-024-2900-1

中文摘要(34) PDF(4) SpringerLink

摘要:

研究论文

Roughness Characterization and Shearing Dislocation Failure for Rock-Backfill Interface

Meifeng Cai, Zhilou Feng, Qifeng Guo, Xiong Yin, Minghui Ma, and Xun Xi

, doi: 10.1007/s12613-024-2901-0

中文摘要(24) PDF(4) SpringerLink

摘要:

研究论文

A novel low-temperature chlorination roasting technology for simultaneous recovery of valuable metals from spent LiCoO2 cathode material

Junjie Shi, Changle Hou, Jingjing Dong, Dong Chen, and Jianzhong Li

, doi: 10.1007/s12613-024-2898-4

中文摘要(41) PDF(10) SpringerLink

摘要:

研究论文

Effect of lamellarizing process on the microstructure and mechanical properties of marine 10Ni5CrMoV steel

Tao Zou, Yanwu Dong, Zhouhua Jiang, Shuyang Du, and Yushuo Li

, doi: 10.1007/s12613-024-2897-5

中文摘要(49) PDF(4) SpringerLink

摘要:

研究论文

Study on the behavior of bubbles escaping from low basicity mold flux for high-Mn high-Al steels using 3D X-Ray microscope

Qiang Liu, Xiang Li, Shen Du, Ming Gao, Yanbin Yin, and Jiongming Zhang

, doi: 10.1007/s12613-024-2896-6

中文摘要(39) PDF(2) SpringerLink

摘要:

研究论文

Valuable metals recycling from spent ternary lithium-ion battery: a review

Hao Liao, Shengen Zhang, Bo Liu, Xuefeng He, Jixin Deng, and Yunji Ding

, doi: 10.1007/s12613-024-2895-7

中文摘要(82) PDF(5) SpringerLink

摘要:

研究论文

A study of electromagnetic responses on microstructures of duplex stainless steels using 3D cellular and electromagnetic sensor FE models

Shuaishuai Xiao, Jialong Shen, Jianing Zhao, Jie Fang, Caiyu Liang, and Lei Zhou

, doi: 10.1007/s12613-024-2894-8

中文摘要(34) PDF(5) SpringerLink

摘要:

研究论文

Shear mechanical properties and fracturing responses of layered rough jointed rock-like materials

Xinxin Nie, Qian Yin, Manchao He, Qi Wang, Hongwen Jing, Bowen Zheng, Bo Meng, Tianci Deng, Zheng Jiang, and Jiangyu Wu

, doi: 10.1007/s12613-024-2893-9

中文摘要(67) PDF(8) SpringerLink

摘要:

研究论文

Enhancing the mechanical properties of casting eutectic high entropy alloys via W addition

Xu Yang, Dezhi Chen, Li Feng, Gang Qin, Shiping Wu, and Ruirun Chen

, doi: 10.1007/s12613-024-2892-x

中文摘要(79) PDF(11) SpringerLink

摘要:

研究论文

Construction of 3D porous Cu1.81S/nitrogen-doped carbon frameworks for ultrafast and long-cycle life sodium-ion storage

Chen Chen, Hongyu Xue, Qilin Hu, Mengfan Wang, Pan Shang, Ziyan Liu, Tao Peng, Deyang Zhang, and Yongsong Luo

, doi: 10.1007/s12613-024-2890-z

中文摘要(43) PDF(11) SpringerLink

摘要:

研究论文

A review of in-situ high-temperature characterizations for understanding processes of metallurgical engineering

Yifan Zhao, Zhiyuan Li, Shijie Li, Weili Song, and Shuqiang Jiao

, doi: 10.1007/s12613-024-2891-y

中文摘要(60) PDF(12) SpringerLink

摘要:

研究论文

Effect of two-step solid solution on microstructure and δ phase precipitation of Inconel 718 alloy

Enyu Liu, Qingshuang Ma, Xintong Li, Aoxue Gao, Jing Bai, Liming Yu, Qiuzhi Gao, and Huijun Li

, doi: 10.1007/s12613-024-2887-7

中文摘要(59) PDF(8) SpringerLink

摘要:

研究论文

Preparation of FeCoNi medium entropy alloy from Fe3+-Co2+-Ni2+ solution system

Zongyou Cheng, Qing Zhao, Mengjie Tao, Jijun Du, Xingxi Huang, and Chengjun Liu

, doi: 10.1007/s12613-024-2888-6

中文摘要(29) PDF(2) SpringerLink

摘要:

研究论文

High-entropy ferrite with tunable magnetic properties for excellent microwave absorption

Yuying Huo, Zhengyan Wang, Yanlan Zhang, and Yongzhen Wang

, doi: 10.1007/s12613-024-2883-y

中文摘要(80) PDF(6) SpringerLink

摘要:

研究论文

Effects of cement content, polypropylene fiber length and dosage on fluidity and mechanical properties of fiber–toughened cemented aeolian sand backfill (FCASB)

Shushuai Wang, Renshu YANG, Yongliang Li, and Zhongwen Yue

, doi: 10.1007/s12613-024-2885-9

中文摘要(44) PDF(3) SpringerLink

摘要:

研究论文

The influence of introducing Zr, Ti, Nb, and Ce elements on the ESCs and mechanical properties of high-pressure die casting Al-Si alloy

Junjie Li, Wenbo Yu, Zhenyu Sun, Weichen Zheng, Liangwei Zhang, Yanling Xue, Wenning Liu, and Shoumei Xiong

, doi: 10.1007/s12613-024-2882-z

中文摘要(54) PDF(3) SpringerLink

摘要:

研究论文

NiCoZn/C@melamine sponge-derived carbon composites with high-performance electromagnetic wave absorption

Xiubo Xie, Heshan Wang, Hideo Kimura, Cui Ni, Wei Du, and Guanglei Wu

, doi: 10.1007/s12613-024-2880-1

中文摘要(127) PDF(17) SpringerLink

摘要:

研究论文

A high-strength and thermally stable TiB2-modified Al-Mn-Mg-Er-Zr alloy fabricated via selective laser melting

Jiang Yu, Yaoxiang Geng, Yongkang Chen, Xiao Wang, Zhijie Zhang, Hao Tang, Junhua Xu, Hongbo Ju, and Dongpeng Wang

, doi: 10.1007/s12613-024-2879-7

中文摘要(51) PDF(5) SpringerLink

摘要:

研究论文

Two-Stage Dynamic Recrystallization and Texture Evolution in an Al-Mg Alloy during Hot Torsion

Kwang-Tae Son, Chang-Hee Cho, Myoung-Gyun Kim, and Jiwoon Lee

, doi: 10.1007/s12613-024-2877-9

中文摘要(88) PDF(10) SpringerLink

摘要:

研究论文

New steelmaking process based on cleaner deoxidation technology

Zhongliang Wang and Yanping Bao

, doi: 10.1007/s12613-024-2878-8

中文摘要(75) PDF(14) SpringerLink

摘要:

研究论文

Rational construction of heterointerfaces in biomass sugarcane-derived carbon for superior electromagnetic wave absorption

Shijie Zhang, Di Lan, Jiajun Zheng, Xingliang Chen, Ailing Feng, Yaxing Pei, Shichang Cai, Suxuan Du, Guanglei Wu, and Zirui Jia

, doi: 10.1007/s12613-024-2875-y

中文摘要(144) PDF(28) SpringerLink

摘要:

研究论文

Enhancing corrosion resistance of plasma electrolytic oxidation coatings on AM50 Mg alloy by inhibitor containing Ba(NO3)2 solutions

Jirui Ma, Xiaopeng Lu, Santosh Prasad Sah, Qianqian Chen, You Zhang, and Fuhui Wang

, doi: 10.1007/s12613-024-2876-x

中文摘要(142) PDF(7) SpringerLink

摘要:

研究论文

Thermodynamic theory of flotation for a complex multiphase solid–liquid system and high-entropy flotation

Shuming Wen

, doi: 10.1007/s12613-024-2874-z

中文摘要(51) PDF(3) SpringerLink

摘要:

研究论文

Role of iron ore in enhancing gasification of iron coke: structural evolution, influence mechanism, and kinetic analysis

Jie Wang, Wei Wang, Xuheng chen, Junfang Bao, Qiuyue Hao, Heng Zheng, and Runsheng Xu

, doi: 10.1007/s12613-024-2873-0

中文摘要(165) PDF(9) SpringerLink

摘要:

研究论文

Investigation and optimization of high-valent Ta-doped SrFeO3-δ as air electrode for intermediate-temperature solid oxide fuel cells

Shanshan Jiang, Hao Qiu, Shaohua Xu, Xiaomin Xu, Jingjing Jiang, Beibei Xiao, Paulo Sérgio Barros Julião, Chao Su, Daifen Chen, and Wei Zhou

, doi: 10.1007/s12613-024-2872-1

中文摘要(161) PDF(27) SpringerLink

摘要:

研究论文

Synergistic effect of gradient Zn content and multi-scale particles on the mechanical properties of Al-Zn-Mg-Cu alloys with coupling distribution of coarse / fine grains

Liangliang Yuan, Mingxing Guo, Yi Wang, Yun Wang, and Linzhong Zhuang

, doi: 10.1007/s12613-024-2871-2

中文摘要(68) PDF(7) SpringerLink

摘要:

特约综述

镍基高温合金熔化焊液化裂纹机理和抑制策略研究进展

易宗礼, 单际国, 赵玥, 张振林, 吴爱萍

, doi: 10.1007/s12613-024-2869-9

中文摘要(99) PDF(14) SpringerLink

摘要:
镍基高温合金因其高温下具有优异的强度、抗氧化性及耐腐蚀等性能，广泛应用于工业燃气轮机、航空发动机燃烧室等关键部件的制造。熔化焊接方法是一种连接和修复这些关键零部件的有效方法，然而液化裂纹是熔化焊过程中面临的重要问题，限制了镍基高温合金的应用。本文综述了近年来镍基高温合金熔化焊液化裂纹的研究进展，介绍了液化裂纹形成过程中液膜的形成机理和开裂准则，归纳了通过调整合金成分、改善母材焊前组织状态、优化焊接工艺参数、采用辅助外场、改善冷却条件等方法抑制液化裂纹的策略。未来的研究需要进一步厘清多组元对液化裂纹的协同影响机制，建立更加完善的液化裂纹开裂准则。

研究论文

Wideband microwave absorbing materials synthesized by Carbonized Peanut-shell combined with ferroferric oxide

Guodong Han, Yong Sun, Junxiang Zhou, Yudeng Wang, Jiafu Wang, and Shaobo Qu

, doi: 10.1007/s12613-024-2868-x

中文摘要(70) PDF(6) SpringerLink

摘要:

研究论文

Preparing lithium-ion battery anode materials from graphitized spent cathode carbon of aluminum electrolysis

Zhihao Zheng, Mingzhuang Xie, Guoiqng Yu, Zegang Wu, Jingjing Zhong, Yi Wang, Hongliang Zhao, and Fengqin Liu

, doi: 10.1007/s12613-024-2866-z

中文摘要(53) PDF(10) SpringerLink

摘要:

研究论文

Effect of heating temperature and atmosphere on the element distribution and microstructure in a high-Mn high-Al austenitic low-density steel

Qi Zhang, Guanghui Chen, Yuemeng Zhu, Zhengliang Xue, and Guang Xu

, doi: 10.1007/s12613-024-2867-y

中文摘要(94) PDF(10) SpringerLink

摘要:

研究论文

The effect of temperature and time on the precipitation of κ-carbides in Fe-28Mn-10Al-0.8C low-density steels: aging mechanism and its impact on material properties

Yulin Gao, Min Zhang, Rui Wang, Xinxin Zhang, Zhunli Tan, and Xiaoyu Chong

, doi: 10.1007/s12613-024-2857-0

中文摘要(88) PDF(9) SpringerLink

摘要:

研究论文

Assessing corrosion protection property of coatings loaded with corrosion inhibitors using real-time atmospheric corrosion monitoring (ACM) technique

Xiaoxue Wang, Lulu Jin, Jinke Wang, Rongqiao Wang, Xiuchun Lu, Kai Gao, Jingli Sun, Yong Yuan, Lingwei Ma, Hongchang Qian, and Dawei Zhang

, doi: 10.1007/s12613-024-2860-5

中文摘要(103) PDF(10) SpringerLink

摘要:

研究论文

Breaking the Fe3O4-Wrapping-Copper Microstructure for Enhancing the Copper-Slag separation

Xiaopeng Chi, Haoyu Liu, Jun Xia, Hang Chen, Wei Weng, and Shuiping Zhong

, doi: 10.1007/s12613-024-2861-4

中文摘要(78) PDF(15) SpringerLink

摘要:

特约综述

Recent Advances and Perspectives in MXene-Based Cathodes for Aqueous Zinc-Ion Batteries

Aiduo Wu, Tianhao Wang, Long Zhang, Chen Chen, Qiaomin Li, Xuanhui Qu, and Yongchang Liu

, doi: 10.1007/s12613-024-2859-y

中文摘要(228) PDF(27) SpringerLink

摘要:

研究论文

Iron–nitrogen-doped porous carbon absorbers constructed from hyper-crosslinked ferrocene polymers for efficient electromagnetic wave absorption

Yi Hu, Yijia Zhou, Lijia Liu, Qiang Wang, Chunhong Zhang, Hao Wei, and Yudan Wang

, doi: 10.1007/s12613-024-2863-2

中文摘要(71) PDF(4) SpringerLink

摘要:

研究论文

Effect of heat treatment on microstructure, mechanical properties, and fracture behaviors of ultra-high strength SiC/Al-Zn-Mg-Cu composite

Guonan Ma, Shize Zhu, Dong Wang, Peng Xue, Bolv Xiao, and Zongyi Ma

, doi: 10.1007/s12613-024-2856-1

中文摘要(81) PDF(10) SpringerLink

摘要:

研究论文

Facile synthesis of Cu-doped manganese oxide octahedral molecular sieve for efficient degradation of sulfamethoxazole via peroxymonosulfate activation

Yuhua Qiu, Yingping Huang, Yanlan Wang, Xiang Liu, and Di Huang

, doi: 10.1007/s12613-024-2858-z

中文摘要(69) PDF(8) SpringerLink

摘要:

研究论文

Spin Logic Devices Based on Negative Differential Resistance Enhanced Anomalous Hall Effect

Hong ming Mou, Ziyao Lu, Yuchen Pu, Zhaochu Luo, and Xiaozhong Zhang

, doi: 10.1007/s12613-024-2855-2

中文摘要(83) PDF(9) SpringerLink

摘要:

研究论文

Temperature-jump tensile tests to induce optimized TRIP/TWIP effect in a metastable austenitic stainless steel

Mohammad Javad Sohrabi, Hamed Mirzadeh, Saeed Sadeghpour, Abdol Reza Geranmayeh, and Reza Mahmudi

, doi: 10.1007/s12613-024-2852-5

中文摘要(116) PDF(10) SpringerLink

摘要:

研究论文

Oxidation behavior of FeV₂O₄ and FeCr₂O₄ particles in the air: non-isothermal kinetic and reaction mechanism

Junyi Xiang, Xi Lu, Luwei Bai, Hongru Rao, Sheng Liu, Qingyun Huang, Shengqing Zhang, GuiShang Pei, and Xuewei Lv

, doi: 10.1007/s12613-024-2851-6

中文摘要(59) PDF(6) SpringerLink

摘要:

特约综述

Research progress and future prospects in the service security of key blast furnace equipment

Yanxiang Liu, kexin jiao, Jianliang Zhang, Cui Wang, Lei Zhang, and Xiaoyue Fan

, doi: 10.1007/s12613-024-2850-7

中文摘要(128) PDF(11) SpringerLink

摘要:

特约综述

镁及镁合金箔材的研究进展

沈秋燕, 巴永兴, 张鹏, 宋江凤, 蒋斌, 潘复生

, doi: 10.1007/s12613-024-2846-3

中文摘要(103) PDF(9) SpringerLink

摘要:
镁及镁合金箔具有优异的比阻尼、内耗散系数、磁导率和电导率，以及较高的理论比容量，在电池负极、电磁屏蔽、光学声学和生物等领域具有巨大的应用潜力。然而，镁合金的密排六方晶体结构使其变形能力较差，制备厚度小于0.1 mm的镁及镁合金箔材很困难。这是因为高温下的表面氧化和晶粒长大，或者冷轧后严重的各向异性导致裂纹产生。目前，许多方法用于制备镁合金箔材，主要包括温轧、冷轧、累积叠轧、电塑性轧制和在线加热轧制。镁及镁合金箔材在制备过程中产生的边裂、断带等缺陷是需要考虑的重要因素。本文从镁及镁合金箔材的制备、缺陷控制、性能表征及应用前景等方面综述了其研究现状，分析了不同制备方法的优缺点以及箔材制备过程中的缺陷(边裂和断带)机理。

研究论文

Structural and microwave absorption properties of CoFe2O4/residual carbon composites

Yuanchun Zhang, Shengtao Gao, Xingzhao Zhang, Dacheng Ma, Chuanlei Zhu, and Jun He

, doi: 10.1007/s12613-024-2849-0

中文摘要(50) PDF(6) SpringerLink

摘要:

研究论文

Phase equilibria relations in V2O5-rich part of the Fe2O3-TiO2-V2O5 system at 1200°C related to converter vanadium-bearing slag

Junjie Shi, Yumo Zhai, Yuchao Qiu, Changle Hou, Jingjing Dong, Maoxi Yao, Haiyang Li, Yongrong Zhou, and Jianzhong Li

, doi: 10.1007/s12613-024-2845-4

中文摘要(97) PDF(11) SpringerLink

摘要:

研究论文

Strengthening strategy for high-performance friction stir lap welded joints of 5083 aluminum alloy

Yujia Shen, Jijie Wang, Beibei Wang, Peng Xue, Fengchao Liu, Dingrui Ni, Bolv Xiao, and Zongyi Ma

, doi: 10.1007/s12613-024-2847-2

中文摘要(85) PDF(11) SpringerLink

摘要:

研究论文

Interconnected microstructure and flexural behavior of Ti2C-Ti composites with superior Young’s modulus

Fengbo Sun, Rui Zhang, Fanchao Meng, Shuai Wang, Lujun Huang, and Lin Geng

, doi: 10.1007/s12613-024-2848-1

中文摘要(38) PDF(1) SpringerLink

摘要:

研究论文

Efficient energy transfer from self-trapped excitons to Mn2+ dopants in CsCdCl3:Mn2+ perovskite nanocrystals

Anran Zhang, Xinquan Zhou, Ranran Gu, and Zhiguo Xia

, doi: 10.1007/s12613-024-2844-5

中文摘要(198) PDF(22) SpringerLink

摘要:

特约综述

Electrospinning-hot pressing technique for the fabrication of thermal and electrical storage membranes and applications

Panpan Che, Baoshan Xie, Penghui Cao, Youfu Lv, Daifei Liu, Huali Zhu, Xianwen Wu, Zhangxing He, Jian Chen, and Chuanchang Li

, doi: 10.1007/s12613-024-2842-7

中文摘要(61) PDF(3) SpringerLink

摘要:

研究论文

A novel high-Cr CoNi-based superalloy with superior high-temperature microstructural stability, oxidation resistance and mechanical properties

Xiaorui Zhang, Min Zou, Song Lu, Longfei Li, Xiaoli Zhuang, and Qiang Feng

, doi: 10.1007/s12613-024-2843-6

中文摘要(163) PDF(23) SpringerLink

摘要:

研究论文

Microstructures and micromechanical behaviors of high entropy alloys investigated by synchrotron X-ray and neutron diffraction techniques: a review

Yubo Huang, Ning Xu, Huaile Lu, Yang Ren, Shilei Li, and Yandong Wang

, doi: 10.1007/s12613-024-2840-9

中文摘要(224) PDF(26) SpringerLink

摘要:

研究论文

Chitosan-based triboelectric materials for self-powered sensing at high temperature

Wencan Chen, Chao Li, Yehan Tao, Jie Lu, Jian Du, and Haisong Wang

, doi: 10.1007/s12613-024-2839-2

中文摘要(90) PDF(6) SpringerLink

摘要:

研究论文

Numerical and theoretical study of the large-scale failure of strata overlying sublevel caving mines with steeply-dipping discontinuities

Kaizong Xia, Zhiwei Si, Congxin Chen, Xiaoshuang Li, Junpeng Zou, and Jiahao Yuan

, doi: 10.1007/s12613-024-2838-3

中文摘要(90) PDF(7) SpringerLink

摘要:

研究论文

Oxygen-assisted zinc recovery from electric arc furnace dust using magnesium chloride

Jingdong Huang and Xiao Yang

, doi: 10.1007/s12613-024-2837-4

中文摘要(121) PDF(18) SpringerLink

摘要:

研究论文

Bioleaching of vanadium from stone coal vanadium ore by Bacillus mucilaginosus: influencing factors and bioleaching mechanism

Yingbo Dong, Jinyu Zan, and Hai Lin

, doi: 10.1007/s12613-024-2836-5

中文摘要(88) PDF(4) SpringerLink

摘要:

研究论文

Examining the Impact of Ethanol on Flotation Efficiency of Imidazolium Ionic Liquids as Collectors: Insights from Dynamic Surface Tension and Solvation Analysis

Qian cheng, Zerui lei, Guangjun Mei, and Jianhua Chen

, doi: 10.1007/s12613-024-2835-6

中文摘要(175) PDF(9) SpringerLink

摘要:

研究论文

急倾斜采动煤岩联动诱冲机理研究

来兴平, 许慧聪, 单鹏飞, 胡钦鑫, 丁维熙, 杨尚同, 闫钟铭

, doi: 10.1007/s12613-024-2833-8

中文摘要(179) PDF(23) SpringerLink

摘要:
随着乌鲁木齐矿区急倾斜煤层的加速向深开采，采动煤岩结构畸变致诱冲击地压频发是进入深部后急倾斜煤层赋存矿井亟待解决的关键问题。本文从采动煤岩变形局部化角度出发，综合运用理论分析及数据挖掘等研究方法，构建了急倾斜采动夹持岩柱及煤层顶板的力学模型，得到了采深影响下急倾斜深部工作面重点致灾区域的力学响应行为；基于海量微震数据的空间相关性，厘清了急倾斜工作面推进过程中采动煤岩动力破坏的“时–空”响应关系。结果表明：(1) “夹持岩柱-B₆顶板”这个特殊的煤岩赋存结构是乌东煤矿南采区冲击致灾的源头区域。两者随采深增加均出现不同程度的变形局部化现象。(2) +502水平处为夹持岩柱出现明显挤压撬动效应的临界水平，+509水平处是顶板极限破断的临界水平。岩柱与顶板的弯曲变形和能量蓄积态势均随采深增加呈非线性急速升高。深部急倾斜采动煤岩的变形局部化现象导致倾向撬压效应与走向撬压效应在空间上叠加，加剧了“夹持岩柱-B₃₊₆煤层-B₆顶板”这一“强–弱”特殊结构的能量差异化分布及应力非对称程度，导致工作面面临频发性动力灾害的威胁。(3) 提出的高能畸变区“内–外”协同改性调控技术有效缓解了采场围岩高应力集中及能量异化态势，调控后夹持岩柱及B₆顶板区域平均视电阻率分别提高了430%及300%，有效保障了急倾斜煤层安全高效开发。

研究论文

Edge effect during MPCVD diamond film deposition: multi-physics simulation and experimental verification

Zhiliang Yang, Kang An, Yuchen Liu, Zhijian Guo, Siwu Shao, Jinlong Liu, Junjun Wei, Liangxian Chen, Lishu Wu, and Chengming Li

, doi: 10.1007/s12613-024-2834-7

中文摘要(159) PDF(11) SpringerLink

摘要:

研究论文

Effect of hafnium and molybdenum addition on inclusion characteristics in Co-based dual-phase high entropy alloy

Yong Wang, Wei Wang, Joo Hyun Park, and Wangzhong Mu

, doi: 10.1007/s12613-024-2831-x

中文摘要(163) PDF(16) SpringerLink

摘要:

研究论文

A novel wood-plastic composite fabricated via modified steel slag: preparation, mechanical and flammability properties

Ling Zhao, Kai Zhao, Zhenwen Shen, Yifan Wang, Xiaojie Xia, Hao Zhang, and Hongming Long

, doi: 10.1007/s12613-024-2829-4

中文摘要(175) PDF(16) SpringerLink

摘要:

研究论文

Analysis of explosion wave interactions and rock breaking effect in dual initiation

Renshu Yang, Jinjing Zuo, Liwei Ma, Yong Zhao, Zhen Liu, and Quanmin Xie

, doi: 10.1007/s12613-024-2830-y

中文摘要(76) PDF(13) SpringerLink

摘要:

研究论文

Rapid Prediction of Flow and Concentration Fields in Solid-Liquid Suspension of Slurry Electrolysis Tank

Tingting Lu, Kang Li, Hongliang Zhao, Wei Wang, Zhenhao Zhou, Xiaoyi Cai, and Fengqin Liu

, doi: 10.1007/s12613-024-2826-7

中文摘要(99) PDF(12) SpringerLink

摘要:

研究论文

Effect of the pyrite content on chalcopyrite flotation in the presence of different regrinding conditions

Zejun Wang, Qing Shi, Guofan zhang, Yuxuan zhu, and Binbin li

, doi: 10.1007/s12613-024-2828-5

中文摘要(102) PDF(13) SpringerLink

摘要:

研究论文

Structure characterization of the oxide film on FGH96 superalloy powders with various oxidation degrees

Yang Liu, Yufeng Liu, Sha Zhang, Lin Zhang, Peng Zhang, Shaorong Zhang, Na Liu, Zhou Li, and Xuanhui Qu

, doi: 10.1007/s12613-024-2823-x

中文摘要(121) PDF(15) SpringerLink

摘要:

研究论文

Recycling arsenic-containing bio-leaching residue in cemented paste backfill after thermal treatment: Structure modification, binder properties and environmental assessment

Dengfeng Zhao, Shiyu Zhang, and Yingliang Zhao

, doi: 10.1007/s12613-024-2825-8

中文摘要(141) PDF(19) SpringerLink

摘要:

研究论文

Spray pyrolysis feasibility of tungsten substitution for cobalt in nickel-rich cathode materials

Zihan Hou, Lisheng Guo, Xianlong Fu, Hongxian Zheng, Yuqing Dai, Zhixing Wang, Hui Duan, Mingxia Dong, Wenjie Peng, Guochun Yan, and Jiexi Wang

, doi: 10.1007/s12613-024-2824-9

中文摘要(95) PDF(10) SpringerLink

摘要:

研究论文

Al₂O₃夹杂物在CaO–MgO–SiO₂–Al₂O₃–TiO₂系精炼渣中的溶解行为

邓志银, 张小萌, 郝广御, 魏春新, 朱苗勇

, doi: 10.1007/s12613-023-2817-0

中文摘要(177) PDF(31) SpringerLink

摘要:
在含钛铝镇静钢精炼过程中，钢液中的钛元素因钢–渣反应会向精炼渣中迁移，从而形成CaO–MgO–SiO₂–Al₂O₃–TiO₂系精炼渣，降低了钛的收得率。部分学者提出在精炼渣中添加少量TiO₂来提高钛收得率。为了揭示精炼渣中的TiO₂对夹杂物去除行为的影响规律，本文采用高温激光共聚焦显微镜观察了Al₂O₃夹杂物在含TiO₂精炼渣（w(TiO₂)= 0–10wt%）中的溶解行为，并利用扫描电子显微镜分析了Al₂O₃夹杂物与含TiO₂精炼渣的界面反应行为。研究表明，Al₂O₃夹杂物在溶解过程中，并不会在夹杂物与实验精炼渣的边界生成新的物相，且实验精炼渣中的TiO₂不会改变夹杂物的溶解机理，即边界层扩散是Al₂O₃夹杂物溶解的限制性环节。计算表明，在1450–1500°C时，边界层Al₂O₃的扩散系数在4.18 × 10⁻¹⁰和2.18 × 10⁻⁹ m²/s之间。当添加TiO₂后，精炼渣中Al₂O₃的溶解度降低。尽管如此，相比Al₂O₃的溶解度，精炼渣的黏度和温度对Al₂O₃夹杂物溶解速率的影响更大，即低黏度和低熔点的精炼渣更有利于Al₂O₃夹杂物溶解。添加适当的TiO₂（如5wt%）可以降低精炼渣的黏度和熔点，从而更有利于Al₂O₃夹杂物的溶解；而TiO₂添加过量时（如10wt%）则作用相反。

研究论文

Study on the interaction of cyanide with pyrite and the decyanation of pyrite cyanide residue

Wenwen Han, Hongying Yang, and Linlin Tong

, doi: 10.1007/s12613-023-2814-3

中文摘要(49) PDF(6) SpringerLink

摘要:

研究论文

Hydrogen-based mineral phase transformation mechanism investigation of pyrolusite ore

Ruofeng Wang, Shuai Yuan, Yanjun Li, Peng Gao, Hai Ning, and Ru Li

, doi: 10.1007/s12613-023-2819-y

中文摘要(97) PDF(12) SpringerLink

摘要:

研究论文

Temperature sensing array utilizing the metal to insulator transition of Nd_xSm_1-xNiO₃

Fengbo Yan, Ziang Li, Hao Zhang, Yuchen Cui, Kaiqi Nie, Nuofu Chen, and Jikun Chen

, doi: 10.1007/s12613-023-2816-1

中文摘要(76) PDF(19) SpringerLink

摘要:

研究论文

Ultra-broadband microwave absorber and high-performance pressure sensor based on aramid nanofibers/polypyrrole/nickel porous aerogel

Leyi Zhang, Hongyu Jin, Hanxin Liao, Rao Zhang, Bochong Wang, Jianyong Xiang, Congpu Mu, Kun Zhai, Tianyu Xue, and Fsuehng Wen

, doi: 10.1007/s12613-023-2820-5

中文摘要(106) PDF(12) SpringerLink

摘要:

研究论文

Study on the trip-assisted Si-Mn steel with excellent comprehensive performance obtained through direct strip casting

Hui Xu, Lejun Zhou, Wanlin Wang, and Yang Yi

, doi: 10.1007/s12613-023-2818-z

中文摘要(97) PDF(11) SpringerLink

摘要:

研究论文

Cooperative effect of SLS collector and SPP depressant on the flotation separation of lead oxide minerals from hematite

Honghu Tang, Bingjian Liu, Mengshan Li, Qiancheng Zhang, Xiongxing Zhang, and Feng Jiang

, doi: 10.1007/s12613-023-2815-2

中文摘要(53) PDF(8) SpringerLink

摘要:

特约综述

Nonreciprocal thermal metamaterials: Methods and applications

Zhengjiao Xu, Chuanbao Liu, Xueqian Wang, Yongliang Li, and Yang Bai

, doi: 10.1007/s12613-023-2811-6

中文摘要(113) PDF(12) SpringerLink

摘要:

研究论文

Microstructure evolution and strengthening mechanism of high-performance powder metallurgy TA15 titanium alloy by hot rolling

Ying Gao, Ce Zhang, Jiazhen Zhang, and Xin Lu

, doi: 10.1007/s12613-023-2809-0

中文摘要(147) PDF(18) SpringerLink

摘要:

研究论文

ZnO纳米结构的设计与钙钛矿光吸收调制

司浩楠, 赵璇, 廖庆亮, 张跃

, doi: 10.1007/s12613-023-2808-1

中文摘要(107) PDF(12) SpringerLink

摘要:
光刻技术是一种关键的微纳加工技术，可以实现微纳尺度的精确制造，在电子、信息、能源、催化等领域发挥着重要的作用。本文旨在构建高质量的图案化氧化锌纳米结构，通过优化光刻工艺参数，成功制备了线形和孔洞排列的氧化锌纳米棒阵列。图案化氧化锌阵列高度可调且密度可控，其三维空间结构与大比表面积增加了光捕获能力与电荷输运性能，有助于实现钙钛矿太阳能电池的高效能量转换。光刻工艺的有效管理对于设计和制造具有出色性能的复杂纳米结构和器件提供重要指导。

研究论文

Upcycling the retired graphite/LiCoO₂ batteries for the high voltage graphite/LiCoPO₄-co-workable dual-ion batteries

Miao Du, Hongyan Lü, Kaidi Du, Shuohang Zheng, Xiaotong Wang, Xiaotong Deng, Ronghua Zeng, and Xinglong Wu

, doi: 10.1007/s12613-023-2807-2

中文摘要(106) PDF(19) SpringerLink

摘要:

研究论文

Particle aggregation and breakage kinetics in cemented paste backfill

Liuhua Yang, Hengwei Jia, Aixiang Wu, Huazhe Jiao, Xinming Chen, Yunpeng Kou, and Mengmeng Dong

, doi: 10.1007/s12613-023-2804-5

中文摘要(192) PDF(29) SpringerLink

摘要:

特约综述

Effect of bipolar plates design on corrosion and mass and heat transfer in proton exchange membrane water electrolyzers: A review

Jiuhong Zhang, Xiejing Luo, Yingyu Ding, Luqi Chang, and Chaofang Dong

, doi: 10.1007/s12613-023-2803-6

中文摘要(169) PDF(18) SpringerLink

摘要:

特约综述

Current research progress of heat-resistant Mg alloys: A review

Hong Yang, Wenlong Xie, Jiangfeng Song, Zhihua Dong, Yuyang Gao, Bin Jiang, and Fusheng Pan

, doi: 10.1007/s12613-023-2802-7

中文摘要(195) PDF(23) SpringerLink

摘要:

研究论文

Metallurgical performance evaluation of space-weathered Chang'E-5 lunar soil

Chen Li, Wenhui Ma, Yang Li, and Kuixian Wei

, doi: 10.1007/s12613-023-2800-9

中文摘要(167) PDF(22) SpringerLink

摘要:

研究论文

MgO-attached graphene nanosheet (MgO@GNS) reinforced magnesium matrix nanocomposite with superior mechanical, corrosion and biological performance

S. Abazari , Ali Shamsipur, Hamid Reza Bakhsheshi-Rad, M.S. Soheilirad, F. Khorashadizade, and S.S. Mirhosseini

, doi: 10.1007/s12613-023-2797-0

中文摘要(136) PDF(11) SpringerLink

摘要:

特约综述

Using cemented paste backfill to tackle the phosphogypsum stockpile in China: A down-to-earth technology with new vitalities in pollutants retention and CO₂ abatement

Yikai Liu, Yunming Wang, and Qiusong Chen

, doi: 10.1007/s12613-023-2799-y

中文摘要(1969) PDF(56) SpringerLink

摘要:

添加Cr和Si元素对热成形钢力学性能和抗氧化性能的影响

朱蓉, 杨永刚, 张保忠, 张博睿, 李雷, 吴彦欣, 米振莉

, doi: 10.1007/s12613-023-2796-1

中文摘要(195) PDF(22) SpringerLink

摘要:
热成形钢因其超高强度、高尺寸精度和低回弹等优点，被广泛应用在车身结构件上。然而，热成形钢在热冲压成形的转移过程中会出现表面氧化的问题，虽然通过Al–Si涂层和Zn基镀层可以减少氧化，但是存在降低弯曲断裂应变、高成本和液态金属脆化开裂等问题。本文在传统22MnB5钢的成分基础上添加Cr和Si元素，保证力学性能满足要求的前提下，实现热成形钢抗高温氧化性能的大幅提升。借助拉伸试验机研究Cr–Si合金热成形钢和22MnB5钢在热成形后的力学性能，并通过扫描电镜、透射电镜和X射线衍射仪对两种热成形钢的表面氧化层形貌、相组成和截面氧化层形貌进行探究。结果表明，Cr–Si合金热成形钢的组织由板条马氏体、M₂₃C₆碳化物和残余奥氏体组成。残余奥氏体和碳化物是热成形钢延伸率提高的原因。此外，在930°C氧化5 min后，Cr–Si合金热成形钢的氧化层厚度小于5 μm，远低于22MnB5的氧化层厚度（约45.50 μm）。Cr–Si合金热成形钢的氧化层由Fe₂O₃、Fe₃O₄、FeCr₂O₄和Fe₂SiO₄的混合尖晶石氧化层、无定形SiO₂组成。添加Cr和Si元素可以显著减少氧化层的厚度，并防止FeO相的生成。内氧化层中FeCr₂O₄和Fe₂SiO₄尖晶石氧化层占比的提高和靠近基体的无定形SiO₂的生成有利于Cr–Si合金热成形钢抗氧化性能的提升。

研究论文

Self-growing ZnFe₂O₄ on Cu₉S₅ surface for enhance multi-polarization to construct 3D flower-like composites with high-performance electromagnetic wave absorption

Wenxiong Chen and Honglong Xing

, doi: 10.1007/s12613-023-2795-2

中文摘要(91) PDF(10) SpringerLink

摘要:

研究论文

Low-firing and temperature stability regulation of tri-rutile MgTa₂O₆ microwave dielectric ceramics

Chengzhi Xu, Hongyu Yang, Hongcheng Yang, Linzhuang Xing, Yuan Wang, Zhimin Li, Enzhu Li, and Guorui Zhao

, doi: 10.1007/s12613-023-2791-6

中文摘要(157) PDF(10) SpringerLink

摘要:

研究论文

Synergistic strengthening mechanism of Ca²⁺ - Sodium silicate to selective separation of feldspar and quartz

Bo Lin, Jingzhong Kuang, Yiqiang Yang, Zheyu Huang, Delong Yang, and Mingming Yu

, doi: 10.1007/s12613-023-2790-7

中文摘要(312) PDF(12) SpringerLink

摘要:

研究论文

Porous high-entropy rare earth phosphates (REPO₄, RE = La, Sm, Eu, Ce, Pr, and Gd) ceramic with excellent thermal insulation performance via pore structure tailoring

Peixiong Zhang, Enhui Wang, Jingjing Liu, Tao Yang, Hailong Wang, and Xinmei Hou

, doi: 10.1007/s12613-023-2788-1

中文摘要(181) PDF(27) SpringerLink

摘要:

特约综述

Research progress of CO₂ capture and mineralization based on natural minerals

Chenguang Qian, Chunquan Li, Peng Huang, Jialin Liang, Xin Zhang, Jifa Wang, Jianbing Wang, and Zhiming Sun

, doi: 10.1007/s12613-023-2785-4

中文摘要(332) PDF(35) SpringerLink

摘要:

研究论文

A froth velocity measurement method based on improved U-Net++ semantic segmentation in flotation process

Yiwei Chen, Degang Xu, and Kun Wan

, doi: 10.1007/s12613-023-2787-2

中文摘要(140) PDF(25) SpringerLink

摘要:

研究论文

Effect of dissolved-oxygen on the flotation behavior of pyrite at high altitude area

Yan Miao, Guangke Ye, and Guofan Zhang

, doi: 10.1007/s12613-023-2784-5

中文摘要(134) PDF(14) SpringerLink

摘要:

研究论文

Evolution of microstructure and properties of a novel Ni-based superalloy during stress relief annealing

Lei Jia, Heng Cui, Shufeng Yang, Shaomin Lv, Xingfei Xie, and Jinglong Qu

, doi: 10.1007/s12613-023-2779-2

中文摘要(113) PDF(14) SpringerLink

摘要:

特约综述

A review on linear friction welding of Ni-based superalloys

Xiawei Yang, Tingxi Meng, Qiang Chu, Yu Su, Zhenguo Guo, Rui Xu, Wenlong Fan, Tiejun Ma, and Wenya Li

, doi: 10.1007/s12613-023-2782-7

中文摘要(259) PDF(44) SpringerLink

摘要:

特约综述

Recent progress in visualization and digitization of the coherent transformation structures and application in high-strength steel

Xuelin Wang, Zhenjia Xie, Xiucheng Li, and Chengjia Shang

, doi: 10.1007/s12613-023-2781-8

中文摘要(111) PDF(28) SpringerLink

摘要:

研究论文

Study on the oxidation mechanism of Al-SiC composite at elevated temperature

Jishuo Han, Yong Li, Chenhong Ma, Qingyao Zheng, Xiuhua Zhang, and Xiaofang Wu

, doi: 10.1007/s12613-023-2778-3

中文摘要(538) PDF(11) SpringerLink

摘要:

特约综述

The relationship between the microstructures and unique behavior in high-entropy alloys

Yaqi Wu, Peter K. Liaw, Ruixuan Li, Weiran Zhang, Guihong Geng, Xuehui Yan, Guiqun Liu, and Yong Zhang

, doi: 10.1007/s12613-023-2777-4

中文摘要(500) PDF(37) SpringerLink

摘要:

研究论文

基于形变热处理的新一代9Cr马氏体耐热钢焊接热影响区组织演变与高温蠕变性能调控

张竟文, 余黎明, 刘永长, 丁然, 刘晨曦, 马宗青, 李会军, 高秋志, 王辉

, doi: 10.1007/s12613-023-2760-0

中文摘要(195) PDF(11) SpringerLink

摘要:
新一代马氏体耐热钢G115被认为是高参数先进火电机组关键高温部件制造成形的主要备选材料。然而，服役过程中焊接接头细晶热影响区极易引发高温蠕变先行失效行为，严重威胁机组的安全运行。在本研究中，设计开发了一种形变热处理工艺（正火+冷变形+回火），通过焊前形变热处理定向调控G115钢基体组织，以控制焊接过程中热影响区的组织演变行为，进一步实现其高温蠕变强度的明显提升。焊前形变热处理可以细化基体组织中M₂₃C₆相尺寸，引入高密度形变位错及界面，有效促进了焊接过程中M₂₃C₆相的回溶行为，并缓解了C、Cr元素在原始奥氏体晶界处的偏聚。在焊后热处理过程中，M₂₃C₆相在新形成奥氏体晶粒边界及内部各类界面处弥散均匀再析出，有效抑制了此类界面迁移回复行为。此外，形变位错可以为沉淀相提供形核位点，明显提高了板条内部MX相和富Cu相的析出数密度。在高温蠕变过程中，沉淀相、位错及界面三者之间的交互作用明显增强，很大程度上延缓了低硬度亚晶晶粒的形成。相比于初始态，形变热处理后，G115钢焊接接头细晶热影响区的高温蠕变断裂时间延长了将近20%。本研究的开展不仅为G115钢焊接接头服役中面临的关键问题提供了创新性解决策略，也进一步推动了其广泛工业应用。

特约综述

氧化物冶金技术提高高强度低合金钢焊接性的发展现状—结合脱氧剂和微合金化元素

李婷婷, 杨健

, doi: 10.1007/s12613-023-2754-y

中文摘要(171) PDF(14) SpringerLink

摘要:
氧化物冶金的作用机制包括两方面，一方面利用微米夹杂物诱导晶内针状铁素（IAF）形成，另一方面焊接过程中通过纳米析出钉扎原奥氏体晶粒（PAG）限制晶粒长大。结晶取向混乱的 IAF 和细化的PAG可抑制钢中裂纹的产生和扩展，从而提高冲击韧性。本文从氧化冶金的概念出发，总结在大线能量焊接过程脱氧元素和合金元素综合作用效果，希望对改善热影响区（HAZ）冲击韧性的相关研究和实践有所启发。Ti结合其他强脱氧剂（如 Mg、Ca、Zr 和稀土金属 (REM)）的复合脱氧能够通过细化PAG和提高IAF组织含量提高HAZ冲击韧性。然而，复合脱氧方式形成的有效夹杂物通常是多相的，很难确定诱导IAF形成的特定相。合金元素（如 C、Si、Al、Nb 或 Cr）含量的增加会降低HAZ韧性。C含量增加通常会增加粗碳化物的数量，降低IAF的形核效力。Si、Cr或Al的添加会导致不利于HAZ韧性的组织的形成。Nb则会降低析出物的高温稳定性。Mo、V 和 B 可提高 HAZ 韧性。含Mo的沉淀物具有良好的热稳定性。VN和V(C,N)晶体与铁素体具有良好的相干，可有效促进IAF形核。夹杂物周围贫B区的形成也能够促进IAF的形成。合金元素之间的相互作用非常复杂，添加不同合金元素的效果仍有待评估。未来，各种合金元素之间的相互作用及其对氧化物冶金的影响，以及利用第一性原理计算有效夹杂物的成核效应将成为氧化物冶金的重点。