[1] | Arash Khakzadshahandashti, Mohammad Reza Rahimipour, Kourosh Shirvani, Mansour Razavi. Weldability and liquation cracking behavior of ZhS6U superalloy during electron-beam welding[J]. International Journal of Minerals, Metallurgy and Materials, 2019, 26(2): 251-259. doi: 10.1007/s12613-019-1730-z |
[2] | Amirhossein Moghanian, Moslem Paidar, Seyyed Salman Seyedafghahi, Olatunji Oladimeji Ojo. Friction stir welding of pure magnesium and polypropylene in a lap-joint configuration:Microstructure and mechanical properties[J]. International Journal of Minerals, Metallurgy and Materials, 2019, 26(6): 766-774. doi: 10.1007/s12613-019-1784-y |
[3] | Tevfik Küçükömeroğlu, Semih M. Aktarer, Güven İpekoğlu, Gürel Çam. Microstructure and mechanical properties of friction-stir welded St52 steel joints[J]. International Journal of Minerals, Metallurgy and Materials, 2018, 25(12): 1457-1464. doi: 10.1007/s12613-018-1700-x |
[4] | Bin Long, Gui-ying Xu, Buhr Andreas. Microstructure and physical properties of steel-ladle purging plug refractory materials[J]. International Journal of Minerals, Metallurgy and Materials, 2017, 24(2): 186-193. doi: 10.1007/s12613-017-1394-5 |
[5] | Ali Alavi Nia, Ali Shirazi. Effects of different friction stir welding conditions on the microstructure and mechanical properties of copper plates[J]. International Journal of Minerals, Metallurgy and Materials, 2016, 23(7): 799-809. doi: 10.1007/s12613-016-1294-0 |
[6] | Xu-ming Lü, Shi-lei Li, Hai-long Zhang, Yan-li Wang, Xi-tao Wang. Effect of thermal aging on the fatigue crack growth behavior of cast duplex stainless steels[J]. International Journal of Minerals, Metallurgy and Materials, 2015, 22(11): 1163-1170. doi: 10.1007/s12613-015-1181-0 |
[7] | Florin Popa, Ionel Chicinaş, Dan Frunză, Ioan Nicodim, Dorel Banabic. Influence of high deformation on the microstructure of low-carbon steel[J]. International Journal of Minerals, Metallurgy and Materials, 2014, 21(3): 273-278. doi: 10.1007/s12613-014-0905-x |
[8] | Zhen Xu, Zhi-hao Zhao, Gao-song Wang, Chao Zhang, Jian-zhong Cui. Microstructure and mechanical properties of the welding joint filled with microalloying 5183 aluminum welding wires[J]. International Journal of Minerals, Metallurgy and Materials, 2014, 21(6): 577-582. doi: 10.1007/s12613-014-0944-3 |
[9] | H. Ghazanfari, M. Naderi. Expulsion characterization in resistance spot welding by means of a hardness mapping technique[J]. International Journal of Minerals, Metallurgy and Materials, 2014, 21(9): 894-897. doi: 10.1007/s12613-014-0986-6 |
[10] | Xiang-liang Wan, Kai-ming Wu, Gang Huang, Ran Wei, Lin Cheng. In situ observation of austenite grain growth behavior in the simulated coarse-grained heat-affected zone of Ti-microalloyed steels[J]. International Journal of Minerals, Metallurgy and Materials, 2014, 21(9): 878-885. doi: 10.1007/s12613-014-0984-8 |
[11] | Chun-ming Lin, Hsien-lung Tsai, Chang-lin Lee, Di-shiang Chou, Sun-fen Lee, Jen-ching Huang, Jyun-wei Huang. Influence of CO2 laser welding parameters on the microstructure, metallurgy, and mechanical properties of Mg-Al alloys[J]. International Journal of Minerals, Metallurgy and Materials, 2012, 19(12): 1114-1120. doi: 10.1007/s12613-012-0679-y |
[12] | Jing Wang, Min-xu Lu, Lei Zhang, Wei Chang, Li-ning Xu, Li-hua Hu. Effect of welding process on the microstructure and properties of dissimilar weld joints between low alloy steel and duplex stainless steel[J]. International Journal of Minerals, Metallurgy and Materials, 2012, 19(6): 518-524. doi: 10.1007/s12613-012-0589-z |
[13] | Ya-jie Chu, Jian Chen, Xiao-quan Li, Shen-qing Wu, Zong-hui Yang. Effects of thermomechanical treatments on the microstructures and mechanical properties of GTA-welded AZ31B magnesium alloy[J]. International Journal of Minerals, Metallurgy and Materials, 2012, 19(10): 945-950. doi: 10.1007/s12613-012-0652-9 |
[14] | Eslam Ranjbarnodeh, Stefanie Hanke, Sabine Weiss, Alfons Fischer. Effect of welding parameters on the heat-affected zone of AISI409 ferritic stainless steel[J]. International Journal of Minerals, Metallurgy and Materials, 2012, 19(10): 923-929. doi: 10.1007/s12613-012-0648-5 |
[15] | Ran Wei, Cheng-jia Shang, Kai-ming Wu. Grain refinement in the coarse-grained region of the heat-affected zone in low-carbon high-strength microalloyed steels[J]. International Journal of Minerals, Metallurgy and Materials, 2010, 17(6): 737-741. doi: 10.1007/s12613-010-0382-9 |
[16] | Ying-ying Liu, Ze-kun Yao, Hong-zhen Guo, Hang-hang Yang. Microstructure and property of the Ti-24Al-15Nb-1.5Mo/TC11 joint welded by electron beam welding[J]. International Journal of Minerals, Metallurgy and Materials, 2009, 16(5): 568-575. doi: 10.1016/S1674-4799(09)60098-4 |
[17] | Haitao Jiang, Hubin Wu, Di Tang, Qiang Liu. Influence of isothermal bainitic processing on the mechanical properties and microstructure characterization of TRIP steel[J]. International Journal of Minerals, Metallurgy and Materials, 2008, 15(5): 574-579. doi: 10.1016/S1005-8850(08)60107-3 |
[18] | Lin Zhao, Wuzhu Chen, Xudong Zhang, Jiguo Shan. Study on laser welded heat-affected zone in new ultralow carbon bainitic steel[J]. International Journal of Minerals, Metallurgy and Materials, 2007, 14(2): 136-140. doi: 10.1016/S1005-8850(07)60027-9 |
[19] | Shanwu Yang, Enlong Dong, Huibin Wu, Chengjia Shang, Xuemin Wang, Xinlai He. Microstructure evolution during reheating of a Nb-bearing steel Ⅰ. Metallographic examination[J]. International Journal of Minerals, Metallurgy and Materials, 2005, 12(4): 317-320. |
[20] | Hao Yu, Yonglin Kang, Hongbo Dong. Microstructure and strengthening parameters of ultra-thin hot strip of low carbon steel[J]. International Journal of Minerals, Metallurgy and Materials, 2002, 9(5): 356-359. |