Nasser Abu Ghalwa, Hassan Tamos, Mohamed ElAskalni, and Abed Rhman El Agha, Generation of sodium hypochlorite (NaOCl) from sodium chloride solution using C/PbO2 and Pb/PbO2 electrodes, Int. J. Miner. Metall. Mater., 19(2012), No. 6, pp. 561-566. https://doi.org/10.1007/s12613-012-0596-0
Cite this article as:
Nasser Abu Ghalwa, Hassan Tamos, Mohamed ElAskalni, and Abed Rhman El Agha, Generation of sodium hypochlorite (NaOCl) from sodium chloride solution using C/PbO2 and Pb/PbO2 electrodes, Int. J. Miner. Metall. Mater., 19(2012), No. 6, pp. 561-566. https://doi.org/10.1007/s12613-012-0596-0
Nasser Abu Ghalwa, Hassan Tamos, Mohamed ElAskalni, and Abed Rhman El Agha, Generation of sodium hypochlorite (NaOCl) from sodium chloride solution using C/PbO2 and Pb/PbO2 electrodes, Int. J. Miner. Metall. Mater., 19(2012), No. 6, pp. 561-566. https://doi.org/10.1007/s12613-012-0596-0
Citation:
Nasser Abu Ghalwa, Hassan Tamos, Mohamed ElAskalni, and Abed Rhman El Agha, Generation of sodium hypochlorite (NaOCl) from sodium chloride solution using C/PbO2 and Pb/PbO2 electrodes, Int. J. Miner. Metall. Mater., 19(2012), No. 6, pp. 561-566. https://doi.org/10.1007/s12613-012-0596-0
Two modified electrodes (Pb/PbO2 and C/PbO2) were prepared by electrodepositing a lead oxide layer on lead and carbon substrates. These modified electrodes were used as anodes for the generation of sodium hypochlorite (NaOCl) from sodium chloride solution. Different operating conditions and factors affecting the treatment process of NaOCl generation, including current density, pH values, conductive electrolytes, and electrolysis time, were studied and optimized. By comparison the C/PbO2 electrode shows a higher efficiency than the Pb/PbO2 electrode for the generation of NaOCl.
Search
DownLoad: