Influence of particle size and temperature on the dielectric properties of CoFe<sub>2</sub>O<sub>4</sub> nanoparticles

Deepshikha Rathore; Rajnish Kurchania; R. K. Pandey

doi:10.1007/s12613-014-0923-8

Volume 21 Issue 4

Apr. 2014

Turn off MathJax

Article Contents

Abstract

International Journal of Minerals, Metallurgy and Materials > 2014 > 21(4): 408-414. > DOI: 10.1007/s12613-014-0923-8

Deepshikha Rathore, Rajnish Kurchania, and R. K. Pandey, Influence of particle size and temperature on the dielectric properties of CoFe₂O₄ nanoparticles, Int. J. Miner. Metall. Mater., 21(2014), No. 4, pp.408-414. https://dx.doi.org/10.1007/s12613-014-0923-8

Cite this article as:

PDF (510 KB)

Influence of particle size and temperature on the dielectric properties of CoFe₂O₄ nanoparticles

Author Affilications

NIIT University, Neemrana, 301705, Raj., India
Department of Physics, Maulana Azad National Institute of Technology (MANIT), Bhopal, 462051, M.P., India

Received: 13 October 2013; Revised: 30 November 2013; Accepted: 01 December 2013; Available Online: 09 June 2021

Graphical Abstract

Abstract

Abstract

The objective of this study was to establish the dielectric properties of CoFe₂O₄ nanoparticles with particle sizes that varied from 28.6 to 5.8 nm. CoFe₂O₄ nanoparticles were synthesized using a chemical coprecipitation method. The particle sizes were calculated according to the Scherrer formula using X-ray diffraction (XRD) peaks, and the particle size distribution curves were constructed by using field-emission scanning electron microscopy (FESEM) images. The dielectric permittivity and loss tangents of the samples were determined in the frequency range of 1 kHz to 1 MHz and in the temperature range of 300 to 10 K. Both the dielectric permittivity and the loss tangent were found to decrease with increasing frequency and decreasing temperature. For the smallest CoFe₂O₄ nanoparticle size, the dielectric permittivity and loss tangent exhibited their highest and lowest values, respectively. This behavior is very useful for materials used in devices that operate in the microwave or radio frequency ranges.
- cobalt ferrite nanoparticles,
- coprecipitation,
- dielectric properties,
- permittivity,
- loss tangent,
- particle size,
- temperature

FullText(HTML)

References (0)

[1]	Yan Jia, He-yun Sun, Qiao-yi Tan, Hong-shan Gao, Xing-liang Feng, Ren-man Ruan. Linking leach chemistry and microbiology of low-grade copper ore bioleaching at different temperatures [J]. International Journal of Minerals, Metallurgy and Materials, 2018, 25(3): 271-279. DOI: 10.1007/s12613-018-1570-2
[2]	Jia-hua Liu, Lei Wang, Yang Liu, Xiu Song, Jiong Luo, Dan Yuan. Fracture toughness and fracture behavior of SA508-III steel at different temperatures [J]. International Journal of Minerals, Metallurgy and Materials, 2014, 21(12): 1187-1195. DOI: 10.1007/s12613-014-1026-2
[3]	Shan-meng Chen, Bei Cao, Yin-shun Wu, Ke Ma. Effect of temperature on the passivation behavior of steel rebar [J]. International Journal of Minerals, Metallurgy and Materials, 2014, 21(5): 455-461. DOI: 10.1007/s12613-014-0929-2
[4]	Kai Feng, Hong-bing Wang, An-jun Xu, Dong-feng He. Endpoint temperature prediction of molten steel in RH using improved case-based reasoning [J]. International Journal of Minerals, Metallurgy and Materials, 2013, 20(12): 1148-1154. DOI: 10.1007/s12613-013-0848-7
[5]	Zhi-ping Xiong, Xue-ping Ren, Wei-ping Bao, Jian Shu, Shu-xia Li, Hai-tao Qu. Effect of high temperature and high strain rate on the dynamic mechanical properties of Fe-30Mn-3Si-4Al TWIP steel [J]. International Journal of Minerals, Metallurgy and Materials, 2013, 20(9): 835-841. DOI: 10.1007/s12613-013-0804-6
[6]	Chao-lei Zhang, Le-yu Zhou, Ya-zheng Liu. Surface decarburization characteristics and relation between decarburized types and heating temperature of spring steel 60Si2MnA [J]. International Journal of Minerals, Metallurgy and Materials, 2013, 20(8): 720-724. DOI: 10.1007/s12613-013-0789-1
[7]	Huajun Guo, Xinhai Li, Luping Liu, Xinming Zhang, Zhixing Wang, Wenjie Peng, Bingquan Zhu. Effects of temperature and concentration of sulfuric acid on the electrodeposition of grainy electrolytic manganese dioxide [J]. International Journal of Minerals, Metallurgy and Materials, 2005, 12(6): 553-557.
[8]	Renxi Jin, Xiulan Huai. An experimental study of temperature and moisture content of wet porous materials under short-pulsed laser heating [J]. International Journal of Minerals, Metallurgy and Materials, 2005, 12(5): 476-480.
[9]	Xiping Song, Lin Cao, Yanli Wang, Junpin Lin, Guoliang Chen. Determination of stacking fault energies in a high-Nb TiAl alloy at 298 K and 1273 K [J]. International Journal of Minerals, Metallurgy and Materials, 2004, 11(1): 35-38.
[10]	Haiwen Luo, Pei Zhao, Zijiu Dang. High Temperature Ductility Loss of 16MnCr5 Pinion Steels [J]. International Journal of Minerals, Metallurgy and Materials, 1998, 5(3): 123-128.