Hao-yi Chi, Zhen-gui Yuan, Yan Wang, Min Zuo, De-gang Zhao, and Hao-ran Geng, Glass-forming ability, microhardness, corrosion resistance, and dealloying treatment of Mg60-xCu40Ndx alloy ribbons, Int. J. Miner. Metall. Mater., 24(2017), No. 6, pp. 708-717. https://doi.org/10.1007/s12613-017-1454-x
Cite this article as:
Hao-yi Chi, Zhen-gui Yuan, Yan Wang, Min Zuo, De-gang Zhao, and Hao-ran Geng, Glass-forming ability, microhardness, corrosion resistance, and dealloying treatment of Mg60-xCu40Ndx alloy ribbons, Int. J. Miner. Metall. Mater., 24(2017), No. 6, pp. 708-717. https://doi.org/10.1007/s12613-017-1454-x
Research Article

Glass-forming ability, microhardness, corrosion resistance, and dealloying treatment of Mg60-xCu40Ndx alloy ribbons

+ Author Affiliations
  • The influence of Nd addition on the glass-forming ability (GFA), microhardness, and corrosion resistance of Mg60-xCu40Ndx (x=5, 10, 15, 20, and 25, at%) alloys were investigated by differential scanning calorimetry, Vickers-type hardness tests, and electrochemical methods. The results suggest that the GFA and microhardness of the amorphous alloys increase until the Nd content reaches 20at%. The corrosion potential and corrosion current density obtained from the Tafel curves indicate that the Mg35Cu40Nd25 ternary alloy exhibits the best corrosion resistance among the investigated alloys. Notably, nanoporous copper (NPC) was synthesized through a single-step dealloying of Mg60-xCu40Ndx (x=5, 10, 15, 20, and 25) ternary alloys in 0.04 mol·L-1 H2SO4 solution under free corrosion conditions. The influence of dealloying process parameters, such as dealloying time and temperature, on the microstructure of the ribbons was also studied using the surface diffusivity theory. The formation mechanism of dealloyed samples with a multilayered structure was also discussed.
  • loading
  • [1]
    W.J. Botta, J.E. Berger, C.S. Kiminami, V. Roche, R.P. Nogueira, and C. Bolfarini, Corrosion resistance of Fe-based amorphous alloys, J. Alloys Compd., 586(2014), Suppl. 1, p. S105.
    [2]
    A. Inoue, Stabilization of metallic supercooled liquid and bulk amorphous alloys, Acta Mater., 48(2000), No. 1, p. 279.
    [3]
    S. Jayalakshmi, S. Sahu, S. Sankaranarayanan, S. Gupta, and M. Gupta, Development of novel Mg-Ni60Nb40 amorphous particle reinforced composites with enhanced hardness and compressive response, Mater. Des., 53(2014), p. 849.
    [4]
    J.F. Wang, S. Huang, Y.Y. Wei, S.F. Guo, and F.S. Pan, Enhanced mechanical properties and corrosion resistance of a Mg-Zn-Ca bulk metallic glass composite by Fe particle addition, Mater. Lett., 91(2013), p. 311.
    [5]
    T. Muthiah, C. Aguilar, D. Guzman, and S. Kumaran, Synthesis and characterization of mechanical alloyed Mg-Ni-Ca and Mg-Cu-Ca amorphous alloys, Procedia Mater. Sci., 9(2015), p. 428.
    [6]
    Z.P. Lu and C.T Liu, A new glass-forming ability criterion for bulk metallic glasses, Acta Mater., 50(2002), No. 13, p. 3501.
    [7]
    S.G. Kim, A. Inoue, and T. Masumoto, High mechanical strengths of Mg-Ni-Y and Mg-Cu-Y amorphous alloys with significant supercooled liquid region, Mater. Trans. JIM, 31(1990), No. 11, p. 929.
    [8]
    Y.D. Sun, Q.R. Chen, and G.Z. Li, Enhanced glass forming ability and plasticity of Mg-based bulk metallic glass by minor addition of Cd, J. Alloys Compd., 584(2014), p. 273.
    [9]
    K.J. Laws, D. Granata, and J.F. Löffler, Alloy design strategies for sustained ductility in Mg-based amorphous alloys-Tackling structural relaxation, Acta Mater., 103(2016), p. 735.
    [10]
    X.B. Ge, L.Y. Chen, L. Zhang, Y.R. Wen, A. Hirata, and M.W. Chen, Nanoporous metal enhanced catalytic activities of amorphous molybdenum sulfide for high-efficiency hydrogen production, Adv. Mater., 26(2014), No. 19, p. 3100.
    [11]
    Y. Yang, G.D. Ruan, C.S. Xiang, G. Wang, and J.M. Tour, Flexible three-dimensional nanoporous metal-based energy devices, J. Am. Chem. Soc., 136(2014), No. 17, p. 6187.
    [12]
    M.R. Ryder and J.C. Tan, Nanoporous metal organic framework materials for smart applications, Mater. Sci. Technol., 30(2014), No. 13, p. 1598.
    [13]
    N.D. Hoa, N.V. Duy, S.A. El-Safty, and N. Van Hieu, Meso-/Nanoporous semiconducting metal oxides for gas sensor applications, J. Nanomater., 16(2015), No. 1, art. No. 972025.
    [14]
    Z. Wang, J.Y. Liu, C.L. Qin, H. Yu, X.C. Xia, C.Y. Wang, Y.S. Zhang, Q.F. Hu, and W.M. Zhao, Dealloying of Cu-based metallic glasses in acidic solutions:products and energy storage applications, Nanomaterials, 5(2015), No. 2, p. 697.
    [15]
    Y. Ding, Y.J. Kim, and J. Erlebacher, Nanoporous gold leaf:"ancient technology"/advanced material, Adv. Mater., 16(2004), No. 21, p. 1897.
    [16]
    T. Fujita, T. Tokunaga, L. Zhang, D. Li, L. Chen, S. Arai, Y. Yamamoto, A. Hirata, N.Tanaka, Y. Ding, and M. Chen, Atomic observation of catalysis-induced nanopore coarsening of nanoporous gold, Nano Lett.,14(2014), No. 3, p. 1172.
    [17]
    S.H. Kim, J.B. Choi, Q.N. Nguyen, J.M. Lee, S. Park, T.D. Chung, and J.Y. Byun, Nanoporous platinum thin films synthesized by electrochemical dealloying for nonenzymatic glucose detection, Phys. Chem. Chem. Phys., 15(2013), No. 16, p. 5782.
    [18]
    J. Erlebacher, M.J. Aziz, A. Karma, N. Dimitrov, and K. Sieradzki, Evolution of nanoporosity in dealloying, Nature, 410(2001), No. 6827, p. 450.
    [19]
    X.K. Luo, R. Li, L. Huang, and T. Zhang, Nucleation and growth of nanoporous copper ligaments during electrochemical dealloying of Mg-based metallic glasses, Corros. Sci., 67(2013), No. 1, p. 100.
    [20]
    A. Hrubý, Evaluation of glass-forming tendency by means of DTA, Czech. J. Phys., 22(1972), No. 11, p. 1187.
    [21]
    D. Turnbull, Under what conditions can a glass be formed, Contemp. Phys., 10(1969), No. 5, p. 473.
    [22]
    A. Inoue, High strength bulk amorphous alloys with low critical cooling rates, Mater. Trans. JIM, 36(1995), No. 7, p. 866.
    [23]
    H.S. Chen and D. Turnbull, Formation, stability and structure of palladium-silicon based alloy glasses, Acta Metall., 17(1969), No. 8, p. 1021.
    [24]
    Z.P. Lu and C.T. Liu, Glass formation criterion for various glass-forming systems, Phys. Rev. Lett., 91(2003), No. 11, art. No. 115505.
    [25]
    X.H. Du, J.C. Huang, C.T. Liu, and Z.P. Lu, New criterion of glass forming ability for bulk metallic glasses, J. Appl. Phys., 101(2007), No. 8, art. No. 086108.
    [26]
    A. Inoue and K. Hashimoto, Amorphous and Nanocrystalline Materials:Preparation, Properties, and Applications, Vol. 3, Springer Science & Business Media, New York, 2013.
    [27]
    X.Y. Liu, Z. Xiang, J.C. Niu, K.D. Xia, Y. Yang, B. Yan, and W. Lu, The corrosion behaviors of amorphous, nanocrystalline and crystalline Ni-W alloys coating, Int. J. Electrochem. Sci., 10(2015), No. 11, p. 9042.
    [28]
    C.A.C. Souza, S.E. Kuri, F.S Politti, J.E. May, and C.S. Kiminami, Corrosion resistance of amorphous and polycrystalline FeCuNbSiB alloys in sulphuric acid solution, J. Non Cryst. Solids, 247(1999), No.1-3, p. 69.
    [29]
    X. Li, F. Lv, Y.X. Geng, F. Qi, Y.J. Xu, F. Liu, and Y.X. Wang, Preparation and corrosion property of (Cu50Zr50)(100-x) Ndx amorphous alloy, Int. J. Electrochem. Sci., 12(2017), p. 726.
    [30]
    W.H. Jiang, F.X. Liu, Y.D. Wang, H.F. Zhang, H. Choo, and P.K. Liaw, Comparison of mechanical behavior between bulk and ribbon Cu-based metallic glasses, Mater. Sci. Eng. A, 430(2006), No. 1-2, p. 350.
    [31]
    E.G. Seebauer and C.E. Allen, Estimating surface diffusion coefficients, Prog. Surf. Sci., 49(1995), No. 3, p. 265.
    [32]
    J.M. Dona and J. Gonzalez-Velasco, Mechanism of surface diffusion of gold adatoms in contact with an electrolytic solution, J. Phys. Chem., 97(1993), No. 18, p. 4714.
    [33]
    A.A. Vega and R.C. Newman, Nanoporous metals fabricated through electrochemical dealloying of Ag-Au-Pt with systematic variation of Au:Pt ratio, J. Electrochem. Soc., 161(2014), No. 1, p. C1.
    [34]
    Z.H. Dan, F.X. Qin, Y. Sugawara, I. Muto, and N. Hara, Dependency of the formation of Au-stabilized nanoporous copper on the dealloying temperature, Microporous Mesoporous Mater., 186(2014), p. 181.
    [35]
    J. Erlebacher, An atomistic description of dealloying:porosity evolution, the critical potential, and rate-limiting behavior, J. Electrochem. Soc., 151(2004), No. 10, p. C614.
    [36]
    P. Vanýsek, Electrochemical Series in Handbook of Chemistry and Physics, 92nd Ed., Chemical Rubber Company, Boca Raton, 2011.
    [37]
    J.R. Fuhr and W.L. Wiese, CRC Handbook of Chemistry and Physics, Chemical Rubber Company, Boca Raton, 2005.
    [38]
    A.J. Bard, R. Parsons, and J. Jordan, Standard Potentials in Aqueous Solution, International Union of Pure and Applied Chemistry, New York, 1985.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Share Article

    Article Metrics

    Article Views(510) PDF Downloads(8) Cited by()
    Proportional views

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return