Qing-ling Li, Hua-rui Zhang, Ming Gao, Jin-peng Li, Tong-xiao Tao, and Hu Zhang, Mechanisms of reactive element Y on the purification of K4169 superalloy during vacuum induction melting, Int. J. Miner. Metall. Mater., 25(2018), No. 6, pp. 696-703. https://doi.org/10.1007/s12613-018-1617-4
Cite this article as:
Qing-ling Li, Hua-rui Zhang, Ming Gao, Jin-peng Li, Tong-xiao Tao, and Hu Zhang, Mechanisms of reactive element Y on the purification of K4169 superalloy during vacuum induction melting, Int. J. Miner. Metall. Mater., 25(2018), No. 6, pp. 696-703. https://doi.org/10.1007/s12613-018-1617-4
Research Article

Mechanisms of reactive element Y on the purification of K4169 superalloy during vacuum induction melting

+ Author Affiliations
  • Corresponding authors:

    Hua-rui Zhang    E-mail: huarui@buaa.edu.cn

    Hu Zhang    E-mail: zhanghu@buaa.edu.cn

  • Received: 15 October 2017Revised: 31 January 2018Accepted: 12 February 2017
  • The effects of rare earth element Y on the purification of K4169 superalloy during vacuum induction melting were investigated at different superheating temperatures. The corresponding interaction mechanisms were also clarified. Results showed that the addition of Y remarkably promoted the purification effect on the K4169 melt. The contents of O and S in the K4169 as-cast alloy ingots after purification were 3–4 and 8–10 ppm, respectively. The degrees of deoxidation and desulfurization increased to 50% and 57%, respectively, upon the addition of 0.1wt% Y. The yttrium-rich phase that precipitated at the grain boundary blocked the diffusion of C and the accumulation of S, thereby contributing to the purification of the alloy.
  • loading
  • [1]
    A. Iturbe, E. Giraud, E. Hormaetxe, A. Garay, G. Germain, K. Ostolaza, and P.J. Arrazola, Mechanical characterization and modelling of Inconel 718 material behavior for machining process assessment, Mater. Sci. Eng. A, 682(2017), p. 441.
    [2]
    D.H. Ping, Y.F. Gu, C.Y. Cui, and H. Harada, Grain boundary segregation in a Ni-Fe-based (Alloy 718) superalloy, Mater. Sci. Eng. A, 456(2007), No. 1-2, p. 99.
    [3]
    G.A. Zickler, R. Schnitzer, R. Radis, R. Hochfellner, R. Schweins, M. Stockinger, and H. Leitner, Microstructure and mechanical properties of the superalloy ATI Allvac® 718PlusTM, Mater. Sci. Eng. A, 523(2009), No. 1-2, p. 295.
    [4]
    D.K. Das, V. Singh, and S.V. Joshi, High temperature oxidation behaviour of directionally solidified nickel base superalloy CM-247LC, Mater. Sci. Technol., 19(2013), No. 6, p. 695.
    [5]
    E.C. Caldwell, F.J. Fela, and G.E. Fuchs, The segregation of elements in high refactory-content single-crystal nickel-based superalloys, JOM, 56(2004), No. 9, p. 44.
    [6]
    A.J. Brand, K. Karhausen, and R. Kopp, Microstructural simulation of nickel base alloy Incone* 718 in production of turbine discs, Mater. Sci. Technol., 12(1996), No. 11, p. 963.
    [7]
    T.M. Pollock and S. Tin, Nickel-based superalloys for advanced turbine engines: chemistry, microstructure and properties, J. Propul. Power, 22(2006), No. 2, p. 361.
    [8]
    V.V. Sidorov, V.E. Rigin, P.G. Min, and Y.I. Folomeikin, Removal of a sulfur impurity from complex nickel melts in vacuum, Russ. Metall., 2015(2015), No. 11, p. 910.
    [9]
    H. Naffakh-Moosavy, Microstructural evolution and castability prediction in newly designed modern third-generation nickel-based superalloys, Int. J. Miner. Metall. Mater., 23(2016), No. 5, p. 548.
    [10]
    L. Wang, Y. Wang, Y. Liu, X. Song, X.D. Lü, and B.J. Zhang, Coarsening behavior of γ' and γ″ phases in GH4169 superalloy by electric field treatment, Int. J. Miner. Metall. Mater., 20(2013), No. 9, p. 861.
    [11]
    W.X. Yu and J.P. Niu, Deoxidation and denitrogenation during VIM refining Ni-base superalloy, New Technol. New Process, 2002, No. 3, p. 32.
    [12]
    C.F. Miller, G.W. Simmons, and R.P. Wei, Mechanism for oxygen enhanced crack growth in inconel 718, Scripta Mater., 44(2001), No. 10, p. 2405.
    [13]
    K. Sadananda and P. Shahinian, The effect of environment on the creep crack growth behavior several structural alloys, Mater. Sci. Eng., 43(1980), No. 2, p. 159.
    [14]
    C. Sarioglu, C. Stinner, J.R. Blachere, N. Birks, F.S. Pettit, G.H. Meier, and J.L. Smialek, The control of sulfur content in nickel-base, single crystal superalloys and its effects on cyclic oxidation resistance, Superalloys, 1996, p. 71.
    [15]
    T.M. Simpson and A.R. Price, Oxidation improvements of low sulfur processed superalloys, Superalloys, 2000, p. 387.
    [16]
    J.X. Dong, X.B. Liu, B. Tang, Y.H. Hu, Z.C. Xu, and X.S. Xie, Effects of S on mechanical properties and microstructure of Inconel 718 alloy, Acta Metall. Sin., 32(1996), No. 3, p. 241.
    [17]
    L.V. Ramanathan, Role of rare-earth elements on high temperature oxidation behavior of FeCr, NiCr and NiCrAl alloys, Corros. Sci., 35(1993), No. 5-8, p. 871.
    [18]
    N. Nayan, Govind, C.N. Saikrishna, K.V. Ramaiah, S.K. Bhaumik, K.S. Nair, and M.C. Mittal, Vacuum induction melting of NiTi shape memory alloys in graphite crucible, Mater. Sci. Eng. A, 465(2007), No. 1-2, p. 44.
    [19]
    X.H. Cheng, L. Fan, L. Li, K.F. Du, and D.H. Wang, Effect of doping aluminum and yttrium on high-temperature oxidation behavior of Ni-11Fe-10Cu alloy, J. Rare Earths, 34(2016), No. 11, p. 1139.
    [20]
    X.L. Li, S.M. He, X.T. Zhou, Y. Zou, Z.J. Li, A.G. Li, and X.H. Yu, Effects of rare earth yttrium on microstructure and properties of Ni-16Mo-7Cr-4Fe nickel-based superalloy, Mater. Charact., 95(2014), p. 171.
    [21]
    P.J. Zhou, J.J. Yu, X.F. Sun, H.R. Guan, X.M. He, and Z.Q. Hu, Influence of Y on stress rupture property of a Ni-based superalloy, Mater. Sci. Eng. A, 551(2012), p. 236.
    [22]
    L.G. Song, S.S. Li, Y.R. Zheng, and Y.F. Han, Effect of yttrium on high temperature oxidation resistance of a directionally solidified superalloy, J. Rare Earths, 22(2004), No. 6, p. 794.
    [23]
    H.B. Bai, H.R. Zhang, J.F. Weng, B. Kong, and H. Zhang, Purification behaviour of GH4169 scraps under argon atmosphere during vacuum induction melting, Mater. Res. Innovations, 18(2014), No. S4, p. 357.
    [24]
    H.R. Zhang, X.X. Tang, C.G. Zhou, H. Zhang, and S.W. Zhang, Comparison of directional solidification of γ-TiAl alloys in conventional Al2O3 and novel Y2O3-coated Al2O3 crucibles, J. Eur. Ceram. Soc., 33(2013), No. 5, p. 925.
    [25]
    S.J. Li, Y.H. Hu, H.S. Mei, X.S. Xie, Y.H. He, and H.B. Zhang, Desulphurization of Ni-base superalloy GH690, J. Iron Steel Res., 15(2003), No. 7, p. 317.
    [26]
    L.H. Zhao, X.M. Zheng, and J.H. Fei, Surface properties of rare earth oxide solid-base catalysts.. Characterization of Ⅰ surface active sites of rare earth oxide calalysts, Chin. J. Catal., 17(1996), No. 3, p. 227.
    [27]
    C. Sun, R.F. Huang, J.T. Guo, and Z.Q. Hu, Sulphur distribution in K24 cast nickel-base superalloy and its influence on mechanical properties, High Temp. Technol., 6(1988), No. 3, p. 145.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Share Article

    Article Metrics

    Article Views(488) PDF Downloads(16) Cited by()
    Proportional views

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return