Enhancement of the nickel converter slag-cleaning operation with the addition of spent potlining

Dawei Yu; Kinnor Chattopadhyay

doi:10.1007/s12613-018-1637-0

Volume 25 Issue 8

Aug. 2018

Turn off MathJax

Article Contents

Article Navigation > International Journal of Minerals, Metallurgy and Materials > 2018 > 25(8): 881-891

Dawei Yuand Kinnor Chattopadhyay, Enhancement of the nickel converter slag-cleaning operation with the addition of spent potlining, Int. J. Miner. Metall. Mater., 25(2018), No. 8, pp. 881-891. https://doi.org/10.1007/s12613-018-1637-0

Cite this article as:

Dawei Yuand Kinnor Chattopadhyay, Enhancement of the nickel converter slag-cleaning operation with the addition of spent potlining, Int. J. Miner. Metall. Mater., 25(2018), No. 8, pp. 881-891. https://doi.org/10.1007/s12613-018-1637-0

Citation:

PDF( 4144 KB)

Research Article

Enhancement of the nickel converter slag-cleaning operation with the addition of spent potlining

Dawei Yu^1,2, and
Kinnor Chattopadhyay³

+ Author Affiliations

Corresponding author:
Dawei Yu E-mail: dawei.yu@hotmail.com
Received: 12 November 2017; Revised: 28 January 2018; Accepted: 30 January 2018

Abstract

Abstract

The slag cleaning (or matte settling) process was experimentally investigated at 1573 K using a fayalitic nickel converter slag containing spinel and matte/alloy particles. The addition of various amounts of spent potlining (SPL) was studied in terms of its influence on matte settling and the overall metal recoveries. The slags produced were characterized by scanning electron microscopy, energy-dispersive spectroscopy, and wet chemical analysis using inductively coupled plasma optical emission spectrometry. The presence of solid spinel particles in the molten slag hindered coalescence and settling of matte/alloy droplets. Matte settling was effectively promoted with the addition of as little as 2wt% SPL because of the reduction of spinel by the carbonaceous component of the SPL. The reduced viscosity of the molten slag in the presence of SPL also contributed to the accelerated matte settling. Greater metal recoveries were achieved with larger amounts of added SPL. Fast reduction of the molten slag at 1573 K promoted the formation of highly dispersed metal particles/clusters via accelerated nucleation in the molten slag, which increased the overall slag viscosity. This increase in viscosity, when combined with rapid gas evolution from accelerated reduction reactions, led to slag foaming.
- converter slag;
- spent potlining;
- matte;
- nickel;
- matte settling;
- fayalite

FullText(HTML)

Supplements(0)

References(35)

References

[1]	A.E.M. Warner, C.M. Díaz, A.D. Dalvi, P.J. Mackey, A.V. Tarasov, and R.T. Jones, JOM world nonferrous smelter survey Part IV: Nickel: Sulfide, JOM, 59(2007), No. 4, p. 58.
[2]	P. Toscano and T.A. Utigard, Nickel, copper, and cobalt slag losses during converting, Metall. Mater. Trans. B, 34(2003), p. 121.
[3]	F.K. Crundwell, M.S. Moats, V. Ramachandran, T.G. Robinson, and W.G. Davenport, Extractive Metallurgy of Nickel, Cobalt and Platinum Group Metals, Elsevier, New York, 2011, p. 233.
[4]	R.T. Jones, D.A. Hayman, and G.M. Denton, Recovery of cobalt, nickel and copper from slags, using DC-arc furnace technology, [in] 35th Annual Conference of Metallurgists,Montreal, 1996, p. 451.
[5]	D. Yu and K. Chattopadhyay, Numerical simulation of copper recovery from converter slags by the utilisation of spent potlining (SPL) from alumimium electroytic cells, Can. Metall. Q., 55(2016), No. 2, p. 251.
[6]	P. Toscano and T.A. Utigard, Slag loss control with Bessemer mattes, CIM Bull., 97(2004), No. 1076, p. 71.
[7]	G. Holywell and R. Breault, An overview of useful methods to treat, recover, or recycle spelt potlining, JOM, 65(2013), No. 11, p. 1441.
[8]	J.B. Cashman, Detoxifying Spent Aluminum Potliners, US Patent, No. 6190626 B1, 2001.
[9]	R.P. Pawlek, Spent potlining: an update, [in] Light Metals 2012, Springer, Cham, 2012, p. 1313.
[10]	D. Mikša, M. Homšak, and N. Samec, Spent potlining utilisation possibilities, Waste Manage. Res., 21(2003), No. 5, p. 467.
[11]	B.I. Silveira, A.E. Dantas, J.E. Blasquez, and R.K.P. Santos, Characterization of inorganic fraction of spent potliners: evaluation of the cyanides and fluorides content, J. Hazard. Mater., 89(2002), No. 2-3, p. 177.
[12]	W.K. O’Connor, P.C. Turner, and G.W. Addison, Method for Processing Aluminum Spent Potliner in Graphite Electrode Arc Furnace, US Patent, No. 6498282 B1, 2002.
[13]	T.K. Pong, R.J. Adrien, J. Besida, T.A. O’Donnell, and D.G. Wood, Spent potlining ― a hazardous waste made safe, Process Saf. Environ. Prot., 78(2000), No. 3, p. 204.
[14]	I. Rustad, K.H. Karstensen, and K.E. Ødegrd, Disposal options for spent potlining, Waste Manage. Ser., 1(2000), p. 617.
[15]	B. Meirelles and H. Santos, Economic and environmental alternative for destination of spent pot lining from primary aluminum production, [in] Light Metals 2014, Springer, Cham, 2014, p. 565.
[16]	K.W. Grieshaber, C.T. Philipp, and G.F. Bennett, Process for recycling spent potliner and electric arc furnace dust into commercial products using oxygen enrichment, Waste Manage., 14(1994), No. 3-4, p. 267.
[17]	D.W. Yu, V. Mambakkam, D.H. Li, K. Chattopadhyay, and L. Gao, Alternative applications of SPL: Testing ideas through experiments and mathematical modeling, [in] Light Metals 2017, Springer International Publishing, Cham, 2017, p. 579.
[18]	H.J. Hittner and Q.C. Nguyen, Stabilization of Fluorides of Spent Potlining by Chemical Dispersion, US Patent, No. 5024822, 1991.
[19]	D.W. Yu and K. Chattopadhyay, Fluxing molten converter slags with spent potlining (SPL) for metal recovery, [in] 54th Annual Conference of Metallurgists, Toronto, 2015, p. 1.
[20]	L. Blaney, Magnetite (Fe₃O₄): properties, synthesis, and applications, Lehigh Rev., 15(2007), p. 33.
[21]	X.F. Cheng, Z.X. Cui, L. Contreras, M. Chen, A. Nguyen, and B.J. Zhao, Introduction of matte droplets in copper smelting slag, [in] 8th International Symposium on High-Temperature Metallurgical Processing, Springer International Publishing, Cham, 2017, p. 385.
[22]	S.W. IP and J.M. Toguri, Entrainment behaviour of copper and copper matte in copper smelting operations, Metall. Mater. Trans. B, 23(1992), No. 3, p. 303.
[23]	H. Sato, Viscosity measurement of subliquidus magmas: 1707 basalt of Fuji volcano, J. Mineral. Petrol. Sci., 100(2005), No. 4, p. 133.
[24]	R. Roscoe, The viscosity of suspensions of rigid spheres, Br. J. Appl. Phys., 3(1952), No. 8, p. 267.
[25]	A. Warczok, G. Riveros, R. Degel, J. Kunze, and H. Oterdoom, Computer simulation of slag cleaning in an electric furnace, [in] The Carlos Diaz Symposium on Pyrometallurgy, Toronto, 2007, p. 367.
[26]	K.L. Chang, C.T. Huang, W.J. Huang, and Y.C. Liu, Investigation of microstructure and phosphorus distribution in BOF slag, China Steel Tech. Rep., 2008, No. 21, p. 1.
[27]	W.N. Afolabi, Mineral phase crystallization sequence of Delta Steel company (DSC), Ovwian-Aladja, Western Niger Delta Steelmaking slag for use as material in industry, Int. J. Mater. Sci. Appl., 6(2017), No. 2, p. 99.
[28]	H.J. Greenfield and D. Miller, Spatial petterning of Early Iron Age metal production at Ndondondwane, South Africa: the question of cultural continuity between the Early and Late Iron Ages, J. Archaeol. Sci., 31(2004), No. 11, p. 1511.
[29]	A. Selskienė, Examination of smelting and smithing slags formed in bloomery iron-making process, Chemija, 18(2007), No. 2, p. 22.
[30]	C.W. Bale, E. Bélisle, P. Chartrand, S.A. Decterov, G. Eriksson, A.E. Gheribi, K. Hack, I.-H. Jung, Y.-B. Kang, J. Melançon, A.D. Pelton, S. Petersen, C. Bobelin, J. Sangster, and M-A. Van Ende, FactSage thermochemical software and databases, 2010–2016, Calphad, 54(2016), p. 35.
[31]	L. Andrews, Base Metal Losses to Furnace Slag During Processing of Platinum-Bearing Concentrates [Dissertation], University of Pretoria, Pretoria, 2009, p. 1.
[32]	H. Shahrokhi and J.M. Shaw, Fine drop recovery in batch gas-agitated liquid-liquid system, Chem. Eng. Sci., 55(2000), No. 20, p. 4719.
[33]	L.R. Nelson, F. Stober, J. Ndlovu, L.P.S de Villiers, and D. Wanblad, Role of technical innovation on production delivery at the Polokwane Smelter, [in] 44th Annual Conference of Metallurgists of CIM. Nickel and Cobalt 2005- Challenges in Extraction and Production, Calgary, 2005, p. 91.
[34]	R. Minto and W.G. Davenport, Entrapment and flotation of matte in molten slags, Trans. Inst. Min. Metall., 81(1972), p. C59.
[35]	V. Raghavan, Fe–Ni–S (iron–nickel–sufur), J. Phase Equilib. Diffus., 25(2004), No. 4, p. 373.