Structural, compositional and mineralogical characterization of carbonatitic copper sulfide: Run of mine, concentrate and tailings

Kolela J Nyembwe; Elvis Fosso-Kankeu; Frans Waanders; Kasongo D Nyembwe

doi:10.1007/s12613-019-1718-8

Volume 26 Issue 2

Feb. 2019

Turn off MathJax

Article Contents

Article Navigation > International Journal of Minerals, Metallurgy and Materials > 2019 > 26(2): 143-151

Kolela J Nyembwe, Elvis Fosso-Kankeu, Frans Waanders, and Kasongo D Nyembwe, Structural, compositional and mineralogical characterization of carbonatitic copper sulfide: Run of mine, concentrate and tailings, Int. J. Miner. Metall. Mater., 26(2019), No. 2, pp. 143-151. https://doi.org/10.1007/s12613-019-1718-8

Cite this article as:

Kolela J Nyembwe, Elvis Fosso-Kankeu, Frans Waanders, and Kasongo D Nyembwe, Structural, compositional and mineralogical characterization of carbonatitic copper sulfide: Run of mine, concentrate and tailings, Int. J. Miner. Metall. Mater., 26(2019), No. 2, pp. 143-151. https://doi.org/10.1007/s12613-019-1718-8

Citation:

PDF( 523 KB)

Research Article

Structural, compositional and mineralogical characterization of carbonatitic copper sulfide: Run of mine, concentrate and tailings

+ Author Affiliations

Corresponding author:
Elvis Fosso-Kankeu E-mail: elvis.fossokankeu@nwu.ac.za
Received: 2 May 2018; Revised: 15 September 2018; Accepted: 25 September 2018

Abstract

Abstract

The aim of this study was to determine the structural, compositional, and mineralogical composition of carbonatitic copper sulfide concentrator plant streams. Three samples, each from a different stream (run of mine (ROM), concentrate, and tailings) of a copper concentrator were characterized using various techniques, including stereomicroscopy, X-ray fluorescence, X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) in conjunction with energy-dispersive X-ray spectroscopy (EDS), and optical microscopy. The results reveal that each stream possesses its own unique compositional features. Carbonate minerals associated with calcite and dolomite, followed by quartz, remain the major minerals in both the ROM and tails streams. In the ROM stream, chalcopyrite appears to occur as veins within the carbonatite-hosting ore body. Mineral phase mutation was discovered in the tails stream because magnetite formerly identified in the ROM as the primary iron oxide had evolved into hematite. This metamorphosis was likely promoted by the concentration process. The concentration process was effective, upgrading the chalcopyrite content from 2wt% in the ROM stream to 58wt% in the concentrate stream; it was accompanied by bornite (4wt%), anilite (3wt%), and digenite (2.5wt%). In addition, the concentrate stream exhibited properties distinctive from those of the other streams. The FTIR analysis showed the existence of a sulfide group related to the chalcopyrite mineral. Free chalcopyrite grains were observed in the concentrate by SEM analysis, and their mineral presence was supported by the EDS analysis results. All characterization techniques corresponded well with each other regarding the structure, chemistry, and composition of the samples.
- chalcopyrite;
- mineral characterization;
- phase mutation;
- concentrate streams

FullText(HTML)

Supplements(0)

References(22)

References

[1]	V.J. Martínez-Gómez, J.C. Fuentes-Aceituno, R. Pérez-Garibay, and J.C. Lee, A phenomenological study of the electro-assisted reductive leaching of chalcopyrite, Hydrometallurgy, 164(2016), p. 54.
[2]	Á. Ruiz-Sánchez and G.T. Lapidus, Study of chalcopyrite leaching from a copper concentrate with hydrogen peroxide in aqueous ethylene glycol media, Hydrometallurgy, 169(2017), p. 192.
[3]	B.S. Han, B. Altansukh, K. Haga, Y. Takasaki, and A. Shibayama, Leaching and kinetic study on pressure oxidation of chalcopyrite in H₂SO₄ solution and the effect of pyrite on chalcopyrite leaching, J. Sustainable Metall., 3(2017), No. 3, p. 528.
[4]	Y.B. Li, B. Wang, Q. Xiao, C. Lartey, and Q.W. Zhang, The mechanisms of improved chalcopyrite leaching due to mechanical activation, Hydrometallurgy, 173(2017), p. 149.
[5]	C.L. Aguirre, N. Toro, N. Carvajal, H. Watling, and C. Aguirre, Leaching of chalcopyrite (CuFeS₂) with an imidazolium-based ionic liquid in the presence of chloride, Miner. Eng., 99(2016), p. 60.
[6]	R. Chatterjee, S. Chaudhuri, S.K. Kuila, and D. Ghosh, Structural, microstructural, and thermal characterizations of a chalcopyrite concentrate from the Singhbhum shear zone, India, Int. J. Miner. Metall. Mater., 22(2015), No. 3, p. 225.
[7]	C.O. Beale, Copper in South Africa-Part Ⅱ, J. South Afr. Inst. Min. Metall., 85(1985), No. 4, p. 109.
[8]	W. Petruk, Applied Mineralogy in the Mining Industry.1st Ed., Elsevier, Ontario, 2000, p. 1.
[9]	N.J. Cook, Mineral characterisation of industrial mineral deposits at the Geological Survey of Norway:a short introduction, Bull. Nor. Geol. Unders., 436(2000), p. 189.
[10]	K. Simmons, Soil Sampling, US Environmental Protective Agency (US-EPA), Georgia, 2014, p. 8.
[11]	M.I. Pownceby, C.M. MacRae, and N.C. Wilson, Mineral characterisation by EPMA mapping, Miner. Eng., 20(2007), No. 5, p. 444.
[12]	Y.Y. Chen, C.N. Zou, M. Mastalerz, S.Y. Hu, C. Gasaway, and X.W. Tao, Applications of micro-fourier transform infrared spectroscopy (FTIR) in the geological sciences-a review, Int. J. Mol. Sci., 16(2015), No. 12, p. 30223.
[13]	V.M. Izoitko, and Y.N. Shumskaya, Old tailings dump of concentrating plant as a source of raw minerals,[in] Proceedings of the 16th International Mineral Processing Congress, Roma, 2000, p. 14.
[14]	D.I. Groves and N.M. Vielreicher, The Phalaborwa (Palabora) carbonatite-hosted magnetite-copper sulfide deposit, South Africa:an end-member of iron-oxide copper-gold-rare earth element deposit group?, Miner. Deposita, 36(2001), No. 2, p. 189.
[15]	P.J. Modreski, T.J. Armbrustmacher, and D.B. Hoover. Carbonatite deposits,[in] E.A. du Bray eds., Preliminary Compilation of Descriptive Geo-environmental Mineral Deposit Models, US Geological Survey, Denver, 1996. P. 48.
[16]	Y.H. Zhang, Z. Cao, Y.D. Cao, and C.Y. Sun, FTIR studies of xanthate adsorption on chalcopyrite, pentlandite and pyrite surfaces, J. Mol. Struct., 1048(2013), p. 434.
[17]	A.J. Lynch, N.W. Johnson, D.J. McKee, and G.C. Thorne. The behaviour of minerals in sulphide flotation processes, with reference to simulation and control, J. South Afr. Inst. Min. Metall., 74(1974), No. 9, p. 349.
[18]	V.A. Gorbachev, V.M. Abzalov, and B.P. Yur'ev, Conversion of magnetite to hematite in iron-ore pellets, Steel Transl., 37(2007), No. 4, p. 336.
[19]	B. Plavšić, S. Kobe, and B. Orel, Identification of crystallization forms of CaCO₃ with FTIR spectroscopy, Kovine Zlitine Tehnol., 33(1999), No. 6, p. 517.
[20]	M. Al Dabbas, M.Y. Eisa, and W.H. Kadhim, Estimation of gypsum-calcite percentages using a fourier transform infrared spectrophotometer (FTIR), in Alexandria gypsiferous soil-Iraq, Iraqi J. Sci., 55(2014), No. 4B, p. 1916.
[21]	C.D.C.A. Lopes, P.H.J.O. Limirio, V.R. Novais, and P. Dechichi, Fourier transform infrared spectroscopy (FTIR) application chemical characterization of enamel, dentin and bone, Appl. Spectrosc. Rev., 53(2018), No. 9, p. 761.
[22]	F. Hatert, Transformation sequences of copper sulfides at Vielsalm, Stavelot Massif, Belgium, Can. Mineral., 43(2005), No. 2, p. 623.