Direct electrochemical reduction of copper sulfide in molten borax

Levent Kartal; Servet Timur

doi:10.1007/s12613-019-1821-x

Volume 26 Issue 8

Aug. 2019

Turn off MathJax

Article Contents

Article Navigation > International Journal of Minerals, Metallurgy and Materials > 2019 > 26(8): 992-998

Levent Kartaland Servet Timur, Direct electrochemical reduction of copper sulfide in molten borax, Int. J. Miner. Metall. Mater., 26(2019), No. 8, pp. 992-998. https://doi.org/10.1007/s12613-019-1821-x

Cite this article as:

Levent Kartaland Servet Timur, Direct electrochemical reduction of copper sulfide in molten borax, Int. J. Miner. Metall. Mater., 26(2019), No. 8, pp. 992-998. https://doi.org/10.1007/s12613-019-1821-x

Citation:

PDF( 3151 KB)

Research Article

Direct electrochemical reduction of copper sulfide in molten borax

Levent Kartal^1, and
Servet Timur²

+ Author Affiliations

Corresponding author:
Levent Kartal E-mail: leventkartal@hitit.edu.tr
Received: 30 October 2018; Revised: 19 January 2019; Accepted: 21 January 2019

Abstract

Abstract

In this study, for the first time, direct copper production from copper sulfide was carried out via direct electrochemical reduction method using inexpensive and stable molten borax electrolyte. The effects of current density (100-800 mA/cm²) and electrolysis time (15-90 min) on both the cathodic current efficiency and copper yield were systematically investigated in consideration of possible electrochemical/chemical reactions at 1200℃. The copper production yield reached 98.09% after 90 min of electrolysis at a current density of 600 mA/cm². Direct metal production was shown to be possible with 6 kWh/kg energy consumption at a 600 mA/cm² current density, at which the highest current efficiency (41%) was obtained. The suggested method can also be applied to metal/alloy production from single-and mixed-metal sulfides coming from primary production and precipitated sulfides, which are produced in the mining and metallurgical industries during treatment of process solutions or wastewaters.
- molten salt electrolysis;
- electro-reduction;
- copper extraction;
- copper sulfide;
- borax

FullText(HTML)

Supplements(0)

References(22)

References

[1]	F. Habashi, Handbook of Extractive Metallurgy, Wiley-VCH, Weinheim, 1998, p. 491.
[2]	F. Habashi, Pollution problems in the metallurgical industry:A review, J. Min. Environ., 2(2011), No. 1, p. 17.
[3]	G.M. Li, D.H. Wang, X.B. Jin, and G.Z. Chen, Electrolysis of solid MoS₂ in molten CaCl₂ for Mo extraction without CO₂ emission, Electrochem. Commun., 9(2007), No. 8, p. 1951.
[4]	A. Vignes, Extractive Metallurgy 3:Processing Operations and Routes, John Wiley & Sons Inc., New Jersey, 2013, p. 265.
[5]	A. Vignes, Extractive Metallurgy 2:Metallurgical Reaction Processe, John Wiley & Sons Inc., New Jersey 2013, p. 87.
[6]	G.Z. Chen, D.J. Fray, and T.W. Farthing, Direct electrochemical reduction of titanium dioxide to titanium in molten calcium chloride, Nature, 407(2000), No. 6802, p. 361.
[7]	S.L. Wang, W. Wang, S.C. Li, and S.H. Cao, Cathodic behavior of molten CaCl₂-CaO and CaCl₂-NaCl-CaO, Int. J. Miner. Metall. Mater., 17(2010), No. 6, p. 791.
[8]	Z.Q. Li, L.Y. Ru, C.G. Bai, N. Zhang, and H.H. Wang, Effect of sintering temperature on the electrolysis of TiO₂, Int. J. Miner. Metall. Mater., 19(2012), No. 7, p. 636.
[9]	Y. Liu, Y.A. Zhang, W. Wang, D.S. Li, and J.Y. Ma, Microstructure and electrolysis behavior of self-healing Cu-Ni-Fe composite inert anodes for aluminum electrowinning, Int. J. Miner. Metall. Mater., 25(2018), No. 10, p. 1208.
[10]	H.P. Gao, M.S. Tan, L.B. Rong, Z.Y. Wang, J.J. Peng, X.B. Jin, and G.Z. Chen, Preparation of Mo nanopowders through electroreduction of solid MoS₂ in molten KCl-NaCl, Phys. Chem. Chem. Phys., 16(2014), No. 36, p. 19514.
[11]	Y. Xiao, D.W. van der Plas, J. Bohte, S.C. Lans, A. van Sandwijk, and M.A. Reuter, Electrowinning Al from Al₂S₃ in molten salt, J. Electrochem. Soc., 154(2007), No. 6, p. 334.
[12]	T. Wang, H.P. Gao, X.B. Jin, H.L. Chen, J.J. Peng, and G.Z. Chen, Electrolysis of solid metal sulfide to metal and sulfur in molten NaCl-KCl, Electrochem. Commun., 13(2011), No. 12, p. 1492.
[13]	N. Suzuki, M. Tanaka, H. Noguchi, S. Natsui, T. Kikuchi, and R.O. Suzuki, Reduction of TiS₂ by OS process in CaCl₂ melt, ECS Trans., 75(2016), No. 15, p. 507.
[14]	T. Matsuzaki, S. Natsui, T. Kikuchi. and R.O. Suzuki, Electrolytic reduction of V₃S₄ in molten CaCl₂, Mater. Trans., 58(2017), No. 3, p. 371.
[15]	H.Y. Yin, B. Chung, and D.R. Sadoway, Electrolysis of a molten semiconductor, Nat. Commun., 7(2016), art. No. 12584.
[16]	X.L. Ge, X.D. Wang, and S. Seetharaman, Copper extraction from copper ore by electro-reduction in molten CaCl₂-NaCl, Electrochim. Acta, 54(2009), No. 18, p. 4397.
[17]	X.L. Ge and S. Seetharaman, The salt extraction process-a novel route for metal extraction Part 2-Cu/Fe extraction from copper oxide and sulphides, Miner. Process. Extr. Metall., 119(2010), No. 2, p. 93.
[18]	S. Sokhanvaran, S.K. Lee, G. Lambotte, and A. Allanore, Electrochemistry of molten sulfides:copper extraction from BaS-Cu₂S, J. Electrochem. Soc., 163(2016), No. 3, p. 115.
[19]	S.K. Sahu, B. Chmielowiec, and A. Allanore, Electrolytic extraction of copper, molybdenum and rhenium from molten sulfide electrolyte, Electrochim. Acta, 243(2017), p. 382.
[20]	M.S. Tan, R. He, Y.T. Yuan, Z.Y. Wang, and X.B. Jin, Electrochemical sulfur removal from chalcopyrite in molten NaCl-KCl, Electrochim. Acta, 213(2016), p. 148.
[21]	K.S. Mohandas and D.J. Fray, Electrochemical deoxidation of solid zirconium dioxide in molten calcium chloride, Metall. Mater. Trans. B, 40(2009), No. 5, p. 685.
[22]	S.L. Wang, S.C. Li, L.F. Wan, and C.H. Wang, Electro-deoxidation of V₂O₃ in molten CaCl₂-NaCl-CaO, Int. J. Miner. Metall. Mater., 19(2012), No. 3, p. 212.