Recovery and separation of Fe and Mn from simulated chlorinated vanadium slag by molten salt electrolysis

Shi-yuan Liu; Yu-lan Zhen; Xiao-bo He; Li-jun Wang; Kuo-chih Chou

doi:10.1007/s12613-020-2140-y

Volume 27 Issue 12

Dec. 2020

Turn off MathJax

Article Contents

Article Navigation > International Journal of Minerals, Metallurgy and Materials > 2020 > 27(12): 1678-1686

Shi-yuan Liu, Yu-lan Zhen, Xiao-bo He, Li-jun Wang, and Kuo-chih Chou, Recovery and separation of Fe and Mn from simulated chlorinated vanadium slag by molten salt electrolysis, Int. J. Miner. Metall. Mater., 27(2020), No. 12, pp. 1678-1686. https://doi.org/10.1007/s12613-020-2140-y

Cite this article as:

Shi-yuan Liu, Yu-lan Zhen, Xiao-bo He, Li-jun Wang, and Kuo-chih Chou, Recovery and separation of Fe and Mn from simulated chlorinated vanadium slag by molten salt electrolysis, Int. J. Miner. Metall. Mater., 27(2020), No. 12, pp. 1678-1686. https://doi.org/10.1007/s12613-020-2140-y

Citation:

PDF( 1386 KB)

Research Article

Recovery and separation of Fe and Mn from simulated chlorinated vanadium slag by molten salt electrolysis

+ Author Affiliations

Corresponding author:
Li-jun Wang E-mail: lijunwang@ustb.edu.cn
Received: 2 May 2020; Revised: 6 July 2020; Accepted: 9 July 2020; Available online: 12 July 2020

Abstract

Abstract

Tailings from the vanadium extraction process are discarded each year as waste, which contain approximately 30wt% of Fe. In our previous work, we extracted Fe and Mn from vanadium slag, and Fe and Mn existed in the form of FeCl₂ and MnCl₂ after chlorination by NH₄Cl to achieve effective and green usage of waste containing Fe and Mn. In this work, square wave voltammetry (SWV) and cyclic voltammetry (CV) were applied to investigate the electrochemical behaviors of Fe²⁺ and Mn²⁺ in NaCl–KCl melt at 800°C. The reduction processes of Fe²⁺ and Mn²⁺ were found to involve one step. The diffusion coefficients of FeCl₂ and MnCl₂ in molten salt of eutectic mixtures NaCl–KCl molten salt were measured. The electrodeposition of Fe and Mn were performed using two electrodes at a constant cell voltage. The Mn/Fe mass ratio of the electrodeposited product in NaCl–KCl–2.13wt%FeCl₂–1.07wt%MnCl₂ was 0.0625 at 2.3 V. After the electrolysis of NaCl–KCl–2.13wt%FeCl₂–1.07wt%MnCl₂ melted at 2.3 V, the electrolysis was again started under 3.0 V and the Mn/Fe mass ratio of the electrodeposited product was 36.4. This process provides a novel method to effectively separate Fe and Mn from simulated chlorinated vanadium slag.
- vanadium slag;
- molten salt electrolysis;
- separation;
- electrochemical analysis

FullText(HTML)

Supplements(0)

References(34)

References

[1]	M. Aarabi-Karasgani, F. Rashchi, N. Mostoufi, and E. Vahidi, Leaching of vanadium from LD converter slag using sulfuric acid, Hydrometallurgy, 102(2010), No. 1-4, p. 14. doi: 10.1016/j.hydromet.2010.01.006
[2]	Q.B. Song, J.H. Li, and X.L. Zeng, Minimizing the increasing solid waste through zero waste strategy, J. Cleaner Prod., 104(2015), p. 199. doi: 10.1016/j.jclepro.2014.08.027
[3]	T. Jiang, J. Wen, M. Zhou, and X.X. Xue, Phase evolutions, microstructure and reaction mechanism during calcification roasting of high chromium vanadium slag, J Alloys Compd., 742(2018), p. 402. doi: 10.1016/j.jallcom.2018.01.201
[4]	X.S. Li, B. Xie, G.E. Wang, and X.J. Li, Oxidation process of low-grade vanadium slag in presence of Na₂CO₃, Trans. Nonferrous Met. Soc. China, 21(2011), No. 8, p. 1860. doi: 10.1016/S1003-6326(11)60942-4
[5]	H.Y. Li, H.X. Fang, K. Wang, W. Zhou, Z. Yang, X.M. Yan, W.S. Ge, Q.W. Li, and B. Xie, Asynchronous extraction of vanadium and chromium from vanadium slag by stepwise sodium roasting–water leaching, Hydrometallurgy, 156(2015), p. 124. doi: 10.1016/j.hydromet.2015.06.003
[6]	G. Wang, J. Diao, L. Liu, M. Li, H.Y. Li, G. Li, and B. Xie, Highly efficient utilization of hazardous vanadium extraction tailings containing high chromium concentrations by carbothermic reduction, J. Cleaner Prod., 237(2019), art. No. 117832. doi: 10.1016/j.jclepro.2019.117832
[7]	X.S. Li and B. Xie, Extraction of vanadium from high calcium vanadium slag using direct roasting and soda leaching, Int. J. Miner. Metall. Mater., 19(2012), No. 7, p. 595. doi: 10.1007/s12613-012-0600-8
[8]	J.Y. Xiang, Q.Y. Huang, X.W. Lv, and C.G. Bai, Multistage utilization process for the gradient-recovery of V, Fe and Ti from vanadium-bearing converter slag, J. Hazard. Mater., 336(2017), p. 1. doi: 10.1016/j.jhazmat.2017.04.060
[9]	S.N. Wang, H. Du, S.L. Zheng, B. Liu, H. Yan, and Y. Zhang, New technology from sodium vanadate to vanadium oxide by calcification and carboninztion-ammonium process, CIESC J., 68(2017), No. 7, p. 2781.
[10]	J.Y. Xiang, Q.Y. Huang, W. Lv, G.S. Pei, X.W. Lv, and C.G. Bai, Recovery of tailings from the vanadium extraction process by carbothermic reduction method: Thermodynamic, experimental and hazardous potential assessment, J. Hazard. Mater., 357(2018), p. 128. doi: 10.1016/j.jhazmat.2018.05.064
[11]	G. Wang, M.M. Lin, J. Diao, H.Y. Li, B. Xie, and G. Li, Novel strategy for green comprehensive utilization of vanadium slag with high-content chromium, ACS Sustainable Chem. Eng., 7(2019), No. 21, p. 18133. doi: 10.1021/acssuschemeng.9b05226
[12]	E. Ma, R.X. Lu, and Z.M. Xu, An efficient rough vacuum-chlorinated separation method for the recovery of indium from waste liquid crystal display panels, Green Chem., 14(2012), No. 12, p. 3395. doi: 10.1039/c2gc36241d
[13]	G.C. Du, C.L. Fan, H.T. Yang, and Q.S. Zhu, Selective extraction of vanadium from pre-oxidized vanadium slag by carbochlorination in fluidized bed reactor, J. Cleaner Prod., 237(2019), art. No. 117765. doi: 10.1016/j.jclepro.2019.117765
[14]	Y. Sun, Comprehensive Utilization of Vanadium-bearing Titanomagnetite with Extracting Vanadium by Selective Chlorination Technology [Dissertation], Northeastern University, Shenyang, 2015, p. 61.
[15]	S.Y. Liu, S.J. Li, S. Wu, L.J. Wang, and K.C. Chou, A novel method for vanadium slag comprehensive utilization to synthesize Zn–Mn ferrite and Fe–V–Cr alloy, J. Hazard. Mater., 354(2018), p. 99. doi: 10.1016/j.jhazmat.2018.04.061
[16]	S.Y. Liu, L.J. Wang, and K.C. Chou, Selective chlorinated extraction of iron and manganese from vanadium slag and their application to hydrothermal synthesis of MnFe₂O₄, ACS Sustainable Chem. Eng., 5(2017), No. 11, p. 10588. doi: 10.1021/acssuschemeng.7b02573
[17]	S.Y. Liu, L.J. Wang, K.C. Chou, and R.V. Kumar, Electrolytic preparation and characterization of VCr alloys in molten salt from vanadium slag, J. Alloys Compd., 803(2019), p. 875. doi: 10.1016/j.jallcom.2019.06.366
[18]	S.Y. Liu, L.J. Wang, and K.C. Chou, A novel process for simultaneous extraction of iron, vanadium, manganese, chromium, and titanium from vanadium slag by molten salt electrolysis, Ind. Eng. Chem. Res., 55(2016), No. 50, p. 12962. doi: 10.1021/acs.iecr.6b03682
[19]	Y.B. Zhang, M.H. Du, B.B. Liu, Z.J. Su, G.H. Li, and T. Jiang, Separation and recovery of iron and manganese from high-iron manganese oxide ores by reduction roasting and magnetic separation technique, Sep. Sci. Technol., 52(2017), No. 7, p. 1321. doi: 10.1080/01496395.2017.1284864
[20]	A.B. Suchkov, T.N. Ermakova, L.V. Ryumina, and Z.A. Tubyshkina, On the production of iron powder by electrolysis of ore concentrates in fused salts: Direct iron production and powder metallurgy, Metallurgiya, 1974, No. 1, p. 148.
[21]	S. Licht and B.H. Wang, High solubility pathway for the carbon dioxide free production of iron, Chem. Commun., 46(2010), No. 37, p. 7004. doi: 10.1039/c0cc01594f
[22]	G.M. Haarberg, O.S. Burheim, H. Karoliussen, E. Kvalheim, A.M. Martinez, T. Murakami, S. Pietrzyk, and D.J. Zhao, Middle Temperature Electrolysis for the Production of Iron in Molten Salts, Project report, Norwegian University of Science and Technology, Trondheim, 2006.
[23]	G.M. Haarberg, E. Kvalheim, and S. Rolseth, Electrochemical behaviour of dissolved iron species in molten salts, [in] Proceedings of The Electrochemical Society, ECS Proceedings Volumes, Vol. 2004-24, Honolulu, 2004, p. 990.
[24]	G.M. Haarberg, E. Kvalheim, S. Rolseth, T. Murakami, S. Pietrzyk, and S.L. Wang, Electrodeposition of iron from molten mixed chloride/fluoride electrolytes, ECS Trans., 3(2007), No. 35, p. 341. doi: 10.1149/1.2798677
[25]	Y. Castrillejo, A.M. Martínez, M. Vega, E. Barrado, and G. Picard, Electrochemical study of the properties of iron ions in ZnCl₂ + 2NaCl melt at 450°C, J. Electroanal. Chem., 397(1995), No. 1-2, p. 139. doi: 10.1016/0022-0728(95)04151-9
[26]	S.Z. Duan, P. Dudley, and D. Inman, Voltammetric studies of iron in molten MgCl₂+NaCl+KCl: Part I. The reduction of Fe(Ⅱ), J. Electroanal. Chem. Interfacial Electrochem., 142(1982), No. 1-2, p. 215. doi: 10.1016/S0022-0728(82)80017-X
[27]	D. Inman, J.C. Legey, and R. Spencer, I, A chronopotentiometric study of iron in LiCl–KCl, J. Appl. Electrochem., 8(1978), No. 3, p. 269. doi: 10.1007/BF00616430
[28]	B. Khalaghi, E. Kvalheim, M. Tokushige, L.D. Teng, S. Seetharaman, and G.M. Haarberg, Electrochemical behaviour of dissolved iron chloride in KCl+LiCl+NaCl melt at 550°C, ECS Trans., 64(2014), No. 4, p. 301. doi: 10.1149/06404.0301ecst
[29]	S.J. Xiao, W. Liu, and L. Gao, Cathodic process of manganese (II) in NaCl–KCl melt, Ionics, 22(2016), No. 12, p. 2387. doi: 10.1007/s11581-016-1778-y
[30]	D. Quaranta, L. Massot, M. Gibilaro, E. Mendes, J. Serp, and P. Chamelot, Zirconium(IV) electrochemical behavior in molten LiF–NaF, Electrochim. Acta, 265(2018), p. 586. doi: 10.1016/j.electacta.2018.01.213
[31]	X.L. Zou, X.G. Lu, C.H. Li, and Z.F. Zhou, A direct electrochemical route from oxides to Ti–Si intermetallics, Electrochim. Acta, 55(2010), No. 18, p. 5173. doi: 10.1016/j.electacta.2010.04.032
[32]	J.S. Yao, L.T. Yang, and Z.H. Zhou, The cathodic process of Mn(II) in the molten magnesium electrolyte containing Fe(II), Min. Metall. Eng., 9(1989), No. 1, p. 51.
[33]	K. Ye, M.L. Zhang, Y. Chen, W. Han, Y.D. Yan, S.Q. Wei, and L.J. Chen, Study on the preparation of Mg–Li–Mn alloys by electrochemical codeposition from LiCl–KCl–MgCl₂–MnCl₂ molten salt, J. Appl. Electrochem., 40(2010), No. 7, p. 1387. doi: 10.1007/s10800-010-0106-x
[34]	Y.S. Yang, M.L. Zhang, W. Han, P.Y. Sun, B. Liu, H.L. Jiang, T. Jiang, S.M. Peng, M. Li, K. Ye, and Y.D. Yan, Selective electrodeposition of dysprosium in LiCl–KCl–GdCl₃–DyCl₃ melts at magnesium electrodes: Application to separation of nuclear wastes, Electrochim. Acta, 118(2014), p. 150. doi: 10.1016/j.electacta.2013.11.145