Towards a sustainable technology for production of extra-pure Ti metal: Electrolysis of sulfurized Ti(C,N) in molten CaCl<sub>2</sub>

Eltefat Ahmadi; Ryosuke O. Suzuki; Tatsuya Kikuchi; Takumi Kaneko; Yuta Yashima

doi:10.1007/s12613-020-2162-5

Volume 27 Issue 12

Dec. 2020

Turn off MathJax

Article Contents

Article Navigation > International Journal of Minerals, Metallurgy and Materials > 2020 > 27(12): 1635-1643

Eltefat Ahmadi, Ryosuke O. Suzuki, Tatsuya Kikuchi, Takumi Kaneko, and Yuta Yashima, Towards a sustainable technology for production of extra-pure Ti metal: Electrolysis of sulfurized Ti(C,N) in molten CaCl₂, Int. J. Miner. Metall. Mater., 27(2020), No. 12, pp. 1635-1643. https://doi.org/10.1007/s12613-020-2162-5

Cite this article as:

Eltefat Ahmadi, Ryosuke O. Suzuki, Tatsuya Kikuchi, Takumi Kaneko, and Yuta Yashima, Towards a sustainable technology for production of extra-pure Ti metal: Electrolysis of sulfurized Ti(C,N) in molten CaCl2, Int. J. Miner. Metall. Mater., 27(2020), No. 12, pp. 1635-1643. https://doi.org/10.1007/s12613-020-2162-5

Citation:

PDF( 3558 KB)

Research Article

Towards a sustainable technology for production of extra-pure Ti metal: Electrolysis of sulfurized Ti(C,N) in molten CaCl₂

+ Author Affiliations

Corresponding author:
Eltefat Ahmadi E-mail: eltahmadi@eng.hokudai.ac.jp
Received: 30 May 2020; Revised: 4 August 2020; Accepted: 6 August 2020; Available online: 10 August 2020

Abstract

Abstract

A new concept for producing highly pure Ti metal powder from ilmenite (FeTiO₃) is proposed in this article. Titanium nitride (TiN) or titanium oxycarbonitride (TiO_xC_yN_z) could be synthesized in the first step via the simultaneous carbothermal reduction and nitridation (CTRN) of FeTiO₃ to remove oxygen roughly. To separate oxygen completely, high-quality TiS₂ samples were then synthesized from TiN and TiC using S₂ gas, and the clean sulfides were finally reduced to α-Ti powders with spherical morphology using electrolysis in molten CaCl₂. X-ray diffraction (XRD), scanning electron microscopy (SEM) in conjunction with energy-dispersive X-ray spectroscopy (EDS), and elemental LECO analysis were used to study the phases and microstructures of the sulfides and the electrochemically reduced powders. The Ti powder showed no carbon contamination and consisted of high-purity foil-like Ti sheets with very low oxygen, carbon, and nitrogen contents of less than 0.15wt% O, 0.02wt% C, and 0.003wt% N, respectively. The quality of the Ti powder was much higher than that of the powder obtained using the conventional OS process (proposed by K. Ono and R.O. Suzuki) starting directly from the oxides.
- titanium;
- molten salt electrolysis;
- sulfidation;
- titanium oxycarbonitride;
- ilmenite

FullText(HTML)

Supplements(0)

References(24)

References

[1]	G.Z. Chen, D.J. Fray, and T.W. Farthing, Direct electrochemical reduction of titanium dioxide to titanium in molten calcium chloride, Nature, 407(2000), No. 6802, p. 361. doi: 10.1038/35030069
[2]	K. Ono and R.O. Suzuki, A new concept for producing Ti sponge: Calciothermic reduction, JOM, 54(2002), No. 2, p. 59. doi: 10.1007/BF02701078
[3]	R.O. Suzuki, Calciothermic reduction of TiO₂ and in situ electrolysis of CaO in the molten CaCl₂, J. Phys. Chem. Solids, 66(2005), No. 2-4, p. 461. doi: 10.1016/j.jpcs.2004.06.041
[4]	R.O. Suzuki, Direct reduction processes for titanium oxide in molten salt, JOM, 59(2007), No. 1, p. 68. doi: 10.1007/s11837-007-0014-7
[5]	R.O. Suzuki and S. Inoue, Calciothermic reduction of titanium oxide in molten CaCl₂, Metall. Mater. Trans. B, 34(2003), No. 3, p. 277. doi: 10.1007/s11663-003-0073-2
[6]	H.W. Xie, H.J. Zhao, J.K. Qu, Q.S. Song, Z.Q. Ning, and H.Y. Yin, Thermodynamic considerations of screening halide molten-salt electrolytes for electrochemical reduction of solid oxides/sulfides, J Solid State Electrochem., 23(2019), No. 3, p. 903. doi: 10.1007/s10008-019-04193-w
[7]	R.O. Suzuki and K. Ono, A new concept of sponge titanium production by calciothermic reduction of titanium oxide in the molten CaCl₂, [in] C. Delong, R. W. Bradshaw, M. Matsunaga, G. R. Stafford, and P. C. Trulove, eds., Proceedings 13th International Symposium on Molten Salt, Philadelphia, 2002, p. 810.
[8]	S. Natsui, T. Sudo, R. Shibuya, H. Nogami, T. Kikuchi, and R.O. Suzuki, Visualization of TiO₂ reduction behavior in molten salt electrolysis, Metall. Mater. Trans. B, 51(2020), No. 1, p. 11. doi: 10.1007/s11663-019-01733-7
[9]	N. Suzuki, M. Tanaka, H. Noguchi, S. Natsui, T. Kikuchi, and R.O. Suzuki, Reduction of TiS₂ by OS process in CaCl₂ melt, ECS Trans., 75(2016), No. 15, p. 507. doi: 10.1149/07515.0507ecst
[10]	N. Suzuki, M. Tanaka, H. Noguchi, S. Natsui, T. Kikuchi, and R.O. Suzuki, Calcium reduction of TiS₂ in CaCl₂ melt, Mater. Trans., 58(2017), No. 3, p. 367. doi: 10.2320/matertrans.MK201613
[11]	E. Ahmadi, A. Fauzi, H. Hussin, N. Baharun, K.S. Ariffin, and S.A. Rezan, Synthesis of titanium oxycarbonitride by carbothermal reduction and nitridation of ilmenite with recycling of polyethylene terephthalate (PET), Int. J. Miner. Metall. Mater., 24(2017), No. 4, p. 444. doi: 10.1007/s12613-017-1425-2
[12]	E. Ahmadi, Y. Yashima, R.O. Suzuki, and S.A. Rezan, Formation of titanium sulfide from titanium oxycarbonitride by CS₂ gas, Metall. Mater. Trans. B, 49(2018), No. 4, p. 1808. doi: 10.1007/s11663-018-1278-8
[13]	E. Ahmadi and R.O. Suzuki, An innovative process for production of Ti metal powder via TiS_x from TiN, Metall. Mater. Trans. B, 51(2020), No. 1, p. 140. doi: 10.1007/s11663-019-01730-w
[14]	E. Ahmadi, S.A. Rezan, N. Baharun, S. Ramakrishnan, A. Fauzi, and G.Q. Zhang, Chlorination kinetics of titanium nitride for production of titanium tetrachloride from nitrided ilmenite, Metall. Mater. Trans. B, 48(2017), No. 5, p. 2354. doi: 10.1007/s11663-017-1011-z
[15]	E. Ahmadi, N.I. Shoparwe, N. Ibrahim, S.A.R. Sheikh Abdul Hamid, N. Baharun, K.S. Ariffin, H. Hussin, and M.N. Ahmad Fauzi, The effects of experimental variables on iron removal from nitrided malaysian ilmenite by becher process, [in] B.R. Davis, M.S. Moats, S.J. Wang,et al., eds., Extraction 2018, The Minerals, Metals & Materials Series, Springer, Cham, 2018, p. 1383.
[16]	R.O. Suzuki, K. Ono, and K. Teranuma, Calciothermic reduction of titanium oxide and in-situ electrolysis in molten CaCl₂, Metall. Mater. Trans. B, 34(2003), No. 3, p. 287. doi: 10.1007/s11663-003-0074-1
[17]	C.S. Wu, M.S. Tan, G.Z. Ye, D.J. Fray, and X.B. Jin, High-efficiency preparation of titanium through electrolysis of carbo-sulfurized titanium dioxide, ACS Sustainable Chem. Eng., 7(2019), No. 9, p. 8340. doi: 10.1021/acssuschemeng.8b06801
[18]	S.K. Sadrnezhaad, E. Ahmadi, and M. Malekzadeh, Mechanism of reaction of molten NiTi with EBM graphite crucible, Mater. Sci. Technol., 25(2009), No. 6, p. 699. doi: 10.1179/174328408X317075
[19]	R.O. Suzuki, H. Noguchi, and M. Tanaka, Method for Producing Metallic Titanium, Japanese Patent, Appl. 6495142B2, 2019.
[20]	R.O. Suzuki, N. Suzuki, Y. Yashima, S. Natsui, and T. Kikuchi, Calciothermic reduction and electrolysis of sulfides in CaCl₂ melt, [in] B.R. Davis, M.S. Moats, S.J. Wang, et al., eds., Extraction 2018, The Minerals, Metals & Materials Series, Springer, Cham, 2018, p. 763.
[21]	S.K. Basu and M. Taniguchi, Thermal analysis and kinetics of oxidation of “TiS₂” and “Ti₂S₃”, Thermochim. Acta, 109(1986), No. 1, p. 253. doi: 10.1016/0040-6031(86)85026-2
[22]	T. Kimura, Molten salt synthesis of ceramic powders [in] C. Sikalidis, ed., Advances in Ceramics - Synthesis and Characterization, Processing and Specific Applications, Intech, 2011, p. 75.
[23]	Z.Z. Fang, J.D. Paramore, P. Sun, K.S. Ravi Chandran, Y. Zhang, Y. Xia, F. Cao, M. Koopman, and M. Free, Powder metallurgy of titanium – past, present, and future, Int. Mater. Rev., 63(2018), No. 7, p. 407. doi: 10.1080/09506608.2017.1366003
[24]	O. Kanou, N. Fukada, and S. Takenaka, The use of HDH titanium alloy powder for additive manufacturing application, J. Jpn. Soc. Powder Powder Metall., 64(2017), No. 6, p. 295. doi: 10.2497/jjspm.64.295