Effect of Nb addition on the microstructural, mechanical and electrochemical characteristics of AlCrFeNiCu high-entropy alloy

N. Malatji; A.P.I. Popoola; T. Lengopeng; S. Pityana

doi:10.1007/s12613-020-2178-x

Volume 27 Issue 10

Oct. 2020

Turn off MathJax

Article Contents

Article Navigation > International Journal of Minerals, Metallurgy and Materials > 2020 > 27(10): 1332-1340

N. Malatji, A.P.I. Popoola, T. Lengopeng, and S. Pityana, Effect of Nb addition on the microstructural, mechanical and electrochemical characteristics of AlCrFeNiCu high-entropy alloy, Int. J. Miner. Metall. Mater., 27(2020), No. 10, pp. 1332-1340. https://doi.org/10.1007/s12613-020-2178-x

Cite this article as:

N. Malatji, A.P.I. Popoola, T. Lengopeng, and S. Pityana, Effect of Nb addition on the microstructural, mechanical and electrochemical characteristics of AlCrFeNiCu high-entropy alloy, Int. J. Miner. Metall. Mater., 27(2020), No. 10, pp. 1332-1340. https://doi.org/10.1007/s12613-020-2178-x

Citation:

PDF( 2429 KB)

Research Article

Effect of Nb addition on the microstructural, mechanical and electrochemical characteristics of AlCrFeNiCu high-entropy alloy

+ Author Affiliations

Corresponding author:
N. Malatji E-mail: doublen.malatji@gmail.com
Received: 6 April 2020; Revised: 18 August 2020; Accepted: 31 August 2020; Available online: 2 September 2020

Abstract

Abstract

AlCrFeNiCuNb_x (x = 0.05, 0.15, and 0.26) high-entropy alloys (HEAs) were successfully fabricated using the laser metal deposition technique. The laser power of 1600 W and scanning speed of 1.2 m/min were used during laser processing of the alloys. The microstructural, mechanical, and electrochemical characteristics of the alloys were evaluated using various advanced characterization techniques. Results showed that the alloys exhibited a dual-phase structure with dendritic grains. The inclusion of Nb in the AlCrFeNiCu alloy matrix promoted the formation of fine eutectic structures and changed the shape of the grains from columnar to equiaxed. The Cu content decreased with the increase in the content of Nb, whereas the Al content increased with the increase in the content of Nb. The findings indicated that the presence of Nb in the alloy promoted the formation and enhanced the stability of the body-centered cubic (bcc) phase. All of the alloys that contained Nb also exhibited high hardness, compressive strength, and wear resistance. Furthermore, the low current density and positive shift in potential exhibited by HEAs with appropriate addition of Nb highlighted the superior anticorrosive properties.
- high-entropy alloys;
- microstructure;
- microhardness;
- friction;
- wear loss;
- corrosion resistance

FullText(HTML)

Supplements(0)

References(34)

References

[1]	L.M. Du, L.W. Lan, S. Zhu, H.J. Yang, X.H. Shi, P.K. Liaw, and J.W. Qiao, Effects of temperature on the tribological behavior of Al_0.25CoCrFeNi high-entropy alloy, J. Mater. Sci. Technol., 35(2019), No. 5, p. 917. doi: 10.1016/j.jmst.2018.11.023
[2]	J. Joseph, N. Haghdadi, K. Shamlaye, P. Hodgson, M. Barnett, and D. Fabijanic, The sliding wear behavior of CoCrFeMnNi and Al_xCoCrFeNi high entropy alloys at elevated temperatures, Wear, 428-429(2019), p. 32. doi: 10.1016/j.wear.2019.03.002
[3]	C. Ni, Y. Shi, J. Liu, and G.Z. Huang, Characterization of Al_0.5FeCu_0.7NiCoCr high-entropy alloy coating on aluminum alloy by laser cladding, Opt. Laser Technol., 105(2018), p. 257. doi: 10.1016/j.optlastec.2018.01.058
[4]	G. Jin, Z.B. Cai, Y.J. Guan, X.F. Cui, Z. Liu, Y. Li, M.L. Dong, and D. Zhang, High temperature wear performance of laser-cladded FeNiCoAlCu high-entropy alloy coating, Appl. Surf. Sci., 445(2018), p. 113. doi: 10.1016/j.apsusc.2018.03.135
[5]	Q. Chao, T.T. Guo, T. Jarvis, X.H. Wu, P. Hodgson, and D. Fabijanic, Direct laser deposition cladding of Al_xCoCrFeNi high entropy alloys on a high-temperature stainless steel, Surf. Coat. Technol., 332(2017), p. 440. doi: 10.1016/j.surfcoat.2017.09.072
[6]	Y. Zhang, T.T. Zuo, Z. Tang, M.C. Gao, K.A. Dahmen, P.K. Liaw, and Z.P. Lu, Microstructures and properties of high-entropy alloys, Prog. Mater. Sci., 61(2014), p. 1. doi: 10.1016/j.pmatsci.2013.10.001
[7]	Y.P. Lu, X.Z. Gao, L. Jiang, Z.N. Chen, T.M. Wang, J.C. Jie, H.J. Kang, Y.B. Zhang, S. Guo, H.H. Ruan, Y.H. Zhao, Z.Q. Cao, and T.J. Li, Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range, Acta Mater., 124(2017), p. 143. doi: 10.1016/j.actamat.2016.11.016
[8]	B. Gludovatz, A. Hohenwarter, D. Catoor, E.H. Chang, E.P. George, and R.O. Ritchie, A fracture-resistant high-entropy alloy for cryogenic applications, Science, 345(2014), No. 6201, p. 1153. doi: 10.1126/science.1254581
[9]	Y.Y. Liu, Z. Chen, J.C. Shi, Z.Y. Wang, and J.Y. Zhang, The effect of Al content on microstructures and comprehensive properties in Al_xCoCrCuFeNi high entropy alloys, Vacuum, 161(2019), p. 143. doi: 10.1016/j.vacuum.2018.12.009
[10]	M. Li, J. Gazquez, A. Borisevich, R. Mishra, and K.M. Flores, Evaluation of microstructure and mechanical property variations in Al_xCoCrFeNi high entropy alloys produced by a high-throughput laser deposition method, Intermetallics, 95(2018), p. 110. doi: 10.1016/j.intermet.2018.01.021
[11]	C.M. Cao, W. Tong, S.H. Bukhari, J. Xu, Y.X. Hao, P. Gu, H. Hao, and L.M. Peng, Dynamic tensile deformation and microstructural evolution of Al_xCrMnFeCoNi high-entropy alloys, Mater. Sci. Eng. A, 759(2019), p. 648. doi: 10.1016/j.msea.2019.05.095
[12]	M. Kang, K.R. Lim, J.W. Won, and Y.S. Na, Effect of Co content on the mechanical properties of A2 and B2 phases in AlCo_xCrFeNi high-entropy alloys, J. Alloys Compd., 769(2018), p. 808. doi: 10.1016/j.jallcom.2018.07.346
[13]	Y.F. Juan, J. Li, Y.Q. Jiang, W.L. Jia, and Z.J. Lu, Modified criterions for phase prediction in the multi-component laser-clad coatings and investigations into microstructural evolution/wear resistance of FeCrCoNiAlMo_x laser-clad coatings, Appl. Surf. Sci., 465(2019), p. 700. doi: 10.1016/j.apsusc.2018.08.264
[14]	Y.Q. Jiang, J. Li, Y.F. Juan, Z.J. Lu, and W.L. Jia, Evolution in microstructure and corrosion behavior of AlCoCr_xFeNi high-entropy alloy coatings fabricated by laser cladding, J. Alloys Compd., 775(2019), p. 1. doi: 10.1016/j.jallcom.2018.10.091
[15]	L.L. Hou, J.T. Hui, Y.H. Yao, J. Chen, and J.N. Liu, Effects of boron content on the microstructure and mechanical properties of AlFeCoNiB_x high entropy alloy prepared by vacuum arc melting, Vacuum, 164(2019), p. 212. doi: 10.1016/j.vacuum.2019.03.019
[16]	J.H. Pi, Y. Pan, H. Zhang, and L. Zhang, Microstructure and properties of AlCrFeCuNi_x (0.6 ≤ x ≤ 1.4) high-entropy alloys, Mater. Sci. Eng. A, 534(2012), p. 228. doi: 10.1016/j.msea.2011.11.063
[17]	A. Verma, P. Tarate, A.C. Abhyankar, M.R. Mohape, D.S. Gowtam, V.P. Deshmukh, and T. Shanmugasundaram, High temperature wear in CoCrFeNiCu_x high entropy alloys: The role of Cu, Scripta Mater., 161(2019), p. 28. doi: 10.1016/j.scriptamat.2018.10.007
[18]	Y. Yu, F. He, Z.H. Qiao, Z.J. Wang, W.M. Liu, and J. Yang, Effects of temperature and microstructure on the tribological properties of CoCrFeNiNb_x eutectic high entropy alloys, J. Alloys Compd., 775(2019), p. 1376. doi: 10.1016/j.jallcom.2018.10.138
[19]	Q. An, J.W. Wang, Y. Liu, B. Liu, W.M. Guo, Q.H. Fang, and Y. Nie, Effects of C and Mo on microstructures and mechanical properties of dual-phase high entropy alloys, Intermetallics, 110(2019), art. No. 106471. doi: 10.1016/j.intermet.2019.04.014
[20]	Y. Qiu, S. Thomas, D. Fabijanic, A.J. Barlow, H.L. Fraser, and N. Birbilis, Microstructural evolution, electrochemical and corrosion properties of Al_xCoCrFeNiTi_y high entropy alloys, Mater. Des., 170(2019), art. No. 107698. doi: 10.1016/j.matdes.2019.107698
[21]	Y.X. Guo and Q.B. Liu, MoFeCrTiWAlNb refractory high-entropy alloy coating fabricated by rectangular-spot laser cladding, Intermetallics, 102(2018), p. 78. doi: 10.1016/j.intermet.2018.09.005
[22]	L. Guo, W.Q. Wu, S. Ni, Z.W. Wang, and M. Song, Effects of annealing on the microstructural evolution and phase transition in an AlCrCuFeNi₂ high-entropy alloy, Micron, 101(2017), p. 69. doi: 10.1016/j.micron.2017.06.007
[23]	S.C. Luo, P. Gao, H.C. Yu, J.J. Yang, Z.M. Wang, and X.Y. Zeng, Selective laser melting of an equiatomic AlCrCuFeNi high-entropy alloy: Processability, non-equilibrium microstructure and mechanical behavior, J. Alloys Compd., 771(2019), p. 387. doi: 10.1016/j.jallcom.2018.08.290
[24]	P.D. Niu, R.D. Li, T.C. Yuan, S.Y. Zhu, C. Chen, M.B. Wang, and L. Huang, Microstructures and properties of an equimolar AlCoCrFeNi high entropy alloy printed by selective laser melting, Intermetallics, 104(2019), p. 24. doi: 10.1016/j.intermet.2018.10.018
[25]	H. Dobbelstein, E.L. Gurevich, E.P. George, A. Ostendorf, and G. Laplanche, Laser metal deposition of compositionally graded TiZrNbTa refractory high-entropy alloys using elemental powder blends, Addit. Manuf., 25(2019), p. 252.
[26]	R.D. Li, P.D. Niu, T.C. Yuan, P. Cao, C. Chen, and K.C. Zhou, Selective laser melting of an equiatomic CoCrFeMnNi high-entropy alloy: Processability, non-equilibrium microstructure and mechanical property, J. Alloys Compd., 746(2018), p. 125. doi: 10.1016/j.jallcom.2018.02.298
[27]	N.D. Nam and J.G. Kim, Effect of niobium on the corrosion behavior of low alloy steel in sulfuric acid solution, Corros. Sci., 52(2010), No. 10, p. 3377. doi: 10.1016/j.corsci.2010.06.010
[28]	S.G. Ma and Y. Zhang, Effect of Nb addition on the microstructure and properties of AlCoCrFeNi high-entropy alloy, Mater. Sci. Eng. A, 532(2012), p. 480. doi: 10.1016/j.msea.2011.10.110
[29]	T.M. Yue, H. Xie, X. Lin, H.O. Yang, and G.H. Meng, Solidification behavior in laser cladding of AlCoCrCuFeNi high-entropy alloy on magnesium substrates, J. Alloys Compd., 587(2014), p. 588. doi: 10.1016/j.jallcom.2013.10.254
[30]	S.G. Ma, Z.M. Jiao, J.W. Qiao, H.J. Yang, Y. Zhang, and Z.H. Wang, Strain rate effects on the dynamic mechanical properties of the AlCrCuFeNi₂ high-entropy alloy, Mater. Sci. Eng. A, 649(2016), p. 35. doi: 10.1016/j.msea.2015.09.089
[31]	A. Munitz, L. Meshi, and M.J. Kaufman, Heat treatments’ effects on the microstructure and mechanical properties of equiatomic Al–Cr–Fe–Mn–Ni high entropy alloy, Mater. Sci. Eng. A, 689(2017), p. 384. doi: 10.1016/j.msea.2017.02.072
[32]	Y.F. Tao, J. Li, Y.H. Lv, and L.F. Hu, Effect of heat treatment on residual stress and wear behaviors of the TiNi/Ti₂Ni based laser cladding composite coatings, Opt. Laser Technol., 97(2017), p. 379. doi: 10.1016/j.optlastec.2017.07.029
[33]	V. Kukshal, A. Patnaik, and I.K. Bhat, Corrosion and thermal behavior of AlCr_1.5CuFeNi₂Ti_x high-entropy alloys, Mater. Today:Proc., 5(2018), No. 9, p. 17073. doi: 10.1016/j.matpr.2018.04.114
[34]	H. Demiroren, M. Aksoy, and M. Erbil, The effect of Nb and heat treatment on the corrosion behavior of ferritic stainless steel in acid environments, Mater. Sci., 44(2008), No. 4, p. 566. doi: 10.1007/s11003-009-9106-6