Enhanced microstructural and mechanical properties of Stellite/WC nanocomposite on Inconel 718 deposited through vibration-assisted laser cladding

Hossein Hosseini-Tayeb; Seyed Mahdi Rafiaei

doi:10.1007/s12613-020-2211-0

Volume 29 Issue 2

Feb. 2022

Turn off MathJax

Article Contents

Article Navigation > International Journal of Minerals, Metallurgy and Materials > 2022 > 29(2): 327-334

Hossein Hosseini-Tayeb and Seyed Mahdi Rafiaei, Enhanced microstructural and mechanical properties of Stellite/WC nanocomposite on Inconel 718 deposited through vibration-assisted laser cladding, Int. J. Miner. Metall. Mater., 29(2022), No. 2, pp. 327-334. https://doi.org/10.1007/s12613-020-2211-0

Cite this article as:

Hossein Hosseini-Tayeb and Seyed Mahdi Rafiaei, Enhanced microstructural and mechanical properties of Stellite/WC nanocomposite on Inconel 718 deposited through vibration-assisted laser cladding, Int. J. Miner. Metall. Mater., 29(2022), No. 2, pp. 327-334. https://doi.org/10.1007/s12613-020-2211-0

Citation:

PDF( 10209 KB)

Research Article

Enhanced microstructural and mechanical properties of Stellite/WC nanocomposite on Inconel 718 deposited through vibration-assisted laser cladding

Hossein Hosseini-Tayeb¹ and
Seyed Mahdi Rafiaei^2,

+ Author Affiliations

Corresponding author:
Seyed Mahdi Rafiaei E-mail: rafiaei@gut.ac.ir
Received: 18 June 2020; Revised: 15 October 2020; Accepted: 19 October 2020; Available online: 20 October 2020

Abstract

Abstract

Stellite-21/WC nanopowders were deposited on Inconel through vibration-assisted laser cladding with different laser parameters. Optical and scanning electron microscopy, hardness measurements, and wear characterizations were employed to understand the microstructural and mechanical behaviors of the nanocomposites. Results showed that varying the cooling rate exerted remarkable effects on the microstructure of the as-cladded composites. Moreover, increasing the laser power from 150 W to 250 W increased the heat input and the dilutions. Dilution was affected by the scanning rate and powder feeding rate at a high laser power of 250 W. When WC nanoparticles were added as reinforcement, the dilution magnitude intensified while the hardness value increased from HV 350 to HV 700. The wear characterizations indicated that the composites containing 3wt% WC nanoparticles possessed the highest wear resistance.
- Stellite;
- WC nanoparticles;
- mechanical properties;
- laser cladding

FullText(HTML)

Supplements(0)

References(32)

References

[1]	Y.C. Zhang, Z.G. Li, P.L. Nie, and Y.X. Wu, Carbide and nitride precipitation during laser cladding of Inconel 718 alloy coatings, Opt. Laser Technol., 52(2013), p. 30. doi: 10.1016/j.optlastec.2013.03.023
[2]	C.L. Zhong, A. Gasser, J. Kittel, K. Wissenbach, and R. Poprawe, Improvement of material performance of Inconel 718 formed by high deposition-rate laser metal deposition, Mater. Des., 98(2016), p. 128. doi: 10.1016/j.matdes.2016.03.006
[3]	R.C. Reed, The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2008.
[4]	S.M. Rafiaei, J.H. Kim, and S. Kang, Effect of nitrogen and secondary carbide on the microstructure and properties of (Ti_0.93W_0.07)C–Ni cermets, Int. J. Refract. Met. Hard Mater., 44(2014), p. 123. doi: 10.1016/j.ijrmhm.2014.02.001
[5]	S.M. Rafiaei, A. Bahrami, and M. Shokouhimehr, Influence of Ni/Co binders and Mo2C on the microstructure evolution and mechanical properties of (Ti_0.93W_0.07)C-based cermets, Ceram. Int., 44(2018), No. 15, p. 17655. doi: 10.1016/j.ceramint.2018.06.227
[6]	B. Li, Y. Jin, J.H. Yao, Z.H. Li, and Q.L. Zhang, Solid-state fabrication of WCp-reinforced Stellite-6 composite coatings with supersonic laser deposition, Surf. Coat. Technol., 321(2017), p. 386. doi: 10.1016/j.surfcoat.2017.04.062
[7]	D. Bartkowski, A. Młynarczak, A. Piasecki, B. Dudziak, M. Gościański, and A. Bartkowska, Microstructure, microhardness and corrosion resistance of Stellite-6 coatings reinforced with WC particles using laser cladding, Opt. Laser Technol., 68(2015), p. 191. doi: 10.1016/j.optlastec.2014.12.005
[8]	D. Bartkowski and G. Kinal, Microstructure and wear resistance of Stellite-6/WC MMC coatings produced by laser cladding using Yb: YAG disk laser, Int. J. Refract. Met. Hard Mater., 58(2016), p. 157. doi: 10.1016/j.ijrmhm.2016.04.017
[9]	S. Buytoz, M. Ulutan, and M.M. Yildirim, Dry sliding wear behavior of TIG welding clad WC composite coatings, Appl. Surf. Sci., 252(2005), No. 5, p. 1313. doi: 10.1016/j.apsusc.2005.02.088
[10]	X.K. Deng, G.J. Zhang, T. Wang, S. Ren, Q. Cao, Z.L. Bai, and Z.N. Liu, Microstructure and wear resistance of Mo coating deposited by plasma transferred arc process, Mater. Charact., 131(2017), p. 517. doi: 10.1016/j.matchar.2017.07.044
[11]	M. Ashja and M.M. Verdian, Al–Cu–Fe coatings manufactured by the flame spraying process, Mater. Manuf. Process., 32(2017), No. 4, p. 383. doi: 10.1080/10426914.2016.1244853
[12]	H. Hosseini-Tayeb and S.M. Rafiaei, Effects of lateral and vertical ultrasonic vibrations on the microstructure and microhardness of Stellite-6 coating deposited on Inconel 718 superalloy through laser metal deposition, Mater. Res. Express, 7(2020), No. 1, art. No. 016531. doi: 10.1088/2053-1591/ab6292
[13]	G. Bonizzoni and E. Vassallo, Plasma physics and technology; industrial applications, Vacuum, 64(2002), No. 3-4, p. 327. doi: 10.1016/S0042-207X(01)00341-4
[14]	J.H. Chen, P.N. Chen, C.M. Lin, C.M. Chang, Y.Y. Chang, and W. Wu, Microstructure and wear properties of multicomponent alloy cladding formed by gas tungsten arc welding (GTAW), Surf. Coat. Technol., 203(2009), No. 20-21, p. 3231. doi: 10.1016/j.surfcoat.2009.03.058
[15]	Q.J. Zheng and R. Vasinko, DuraStell PTA cladding for wear application, [in] S.J. Wang, M.L. Free, S. Alam, M.M. Zhang, and P.R. Taylor, eds., Applications of Process Engineering Principles in Materials Processing, Energy and Environmental Technologies. Springer, Cham, 2017, p. 345.
[16]	W.T. Chen and E.C. Dickey, Crystallographic orientation relationships and interfaces in laser-processed directionally solidified WC–W₂C eutectoid ceramics, J. Mater. Sci., 51(2016), No. 9, p. 4371. doi: 10.1007/s10853-016-9749-2
[17]	L. Santo, Laser cladding of metals: A review, Int. J. Surf. Sci. Eng., 2(2008), No. 5, art. No. 327. doi: 10.1504/IJSURFSE.2008.021345
[18]	E. Toyserkani, A. Khajepour, and S.F. Corbin, Laser Cladding, CRD Press, Boca Raton, 2004.
[19]	N. Shamsaei, A. Yadollahi, L.K. Bian, and S.M. Thompson, An overview of direct laser deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control, Addit. Manuf., 8(2015), p. 12. doi: 10.1016/j.addma.2015.07.002
[20]	S.R. More, D.V. Bhatt, and J.V. Menghani, Resent research status on laser cladding as erosion resistance technique - An overview, Mater. Today: Proc., 4(2017), No. 9, p. 9902. doi: 10.1016/j.matpr.2017.06.291
[21]	J. Huebner, P. Rutkowski, D. Kata, and J. Kusiński, Microstructural and mechanical study of inconel 625 – tungsten carbide composite coatings obtained by powder laser cladding, Arch. Metall. Mater., 62(2017), No. 2, p. 531. doi: 10.1515/amm-2017-0078
[22]	T. Kunimine, R. Miyazaki, Y. Yamashita, Y. Funada, Y. Sato, and M. Tsukamoto, Cladding of stellite-6/WC composites coatings by laser metal deposition, Mater. Sci. Forum, 941(2018), p. 1645. doi: 10.4028/www.scientific.net/MSF.941.1645
[23]	M.L. Zhong, K.F. Yao, W.J. Liu, J.C. Goussain, C. Mayer, and A. Becker, High-power laser cladding Stellite 6+WC with various volume rates, J. Laser Appl., 13(2001), No. 6, p. 247. doi: 10.2351/1.1418706
[24]	O. Yılmaz and S. Buytoz, Abrasive wear of Al₂O₃-reinforced aluminium-based MMCs, Compos. Sci. Technol., 61(2001), No. 16, p. 2381. doi: 10.1016/S0266-3538(01)00131-2
[25]	M. Karbalaei Akbari, O. Mirzaee, and H.R. Baharvandi, Fabrication and study on mechanical properties and fracture behavior of nanometric Al₂O₃ particle-reinforced A356 composites focusing on the parameters of vortex method, Mater. Des., 46(2013), p. 199. doi: 10.1016/j.matdes.2012.10.008
[26]	M. Mabuchi and K. Higashi, Strengthening mechanisms of Mg–Si alloys, Acta Mater., 44(1996), No. 11, p. 4611. doi: 10.1016/1359-6454(96)00072-9
[27]	M. Hajizamani and M. Alizadeh, Modification of microstructure and mechanical properties of Al–Zn–Mg/3 wt.% Al₂O₃ composite through semi-solid thermomechanical processing using variable loads, Int. J. Mater. Res., 108(2017), No. 10, p. 840. doi: 10.3139/146.111555
[28]	M. Hajizamani, M. Alizadeh, A. Alizadeh, and S.A. Jenabali-Jahromi, Role of melt percentage on characteristics of Al–Zn–Mg/3 wt.% Al₂O₃ nanostructured composite modified through semi-solid thermomechanical processing, Mater. Res. Express, 5(2018), No. 2, art. No. 026520. doi: 10.1088/2053-1591/aaabf8
[29]	M. Hajizamani, M. Alizadeh, A. Alizadeh, and M. Karamouz, A comparative study on characteristics of nanostructured Al–Zn–Mg/3 wt% Al₂O₃ composites synthesized through solid-state sintering and semi-solid thermomechanical processing, Mater. Res. Express, 6(2019), No. 6, art. No. 066520. doi: 10.1088/2053-1591/ab0ac6
[30]	S. Amirkhanlou, M.R. Rezaei, B. Niroumand, and M.R. Toroghinejad, Refinement of microstructure and improvement of mechanical properties of Al/Al₂O₃ cast composite by accumulative roll bonding process, Mater. Sci. Eng. A, 528(2011), No. 6, p. 2548. doi: 10.1016/j.msea.2010.12.049
[31]	J.R. Davis, Surface Engineering for Corrosion and Wear Resistance, ASM international, Ohio, 2001.
[32]	G.E. Dieter and D. Bacon, Mechanical Metallurgy, McGraw-Hill, New York, 1986.