Review of the electrochemical performance and interfacial issues of high-nickel layered cathodes in inorganic all-solid-state batteries

Jing Wang; Shangqian Zhao; Ling Tang; Fujuan Han; Yi Zhang; Yimian Xia; Lijun Wang; Shigang Lu

doi:10.1007/s12613-022-2453-0

Volume 29 Issue 5

Apr. 2022

Turn off MathJax

Article Contents

Article Navigation > International Journal of Minerals, Metallurgy and Materials > 2022 > 29(5): 1003-1018

Jing Wang, Shangqian Zhao, Ling Tang, Fujuan Han, Yi Zhang, Yimian Xia, Lijun Wang, and Shigang Lu, Review of the electrochemical performance and interfacial issues of high-nickel layered cathodes in inorganic all-solid-state batteries, Int. J. Miner. Metall. Mater., 29(2022), No. 5, pp. 1003-1018. https://doi.org/10.1007/s12613-022-2453-0

Cite this article as:

Jing Wang, Shangqian Zhao, Ling Tang, Fujuan Han, Yi Zhang, Yimian Xia, Lijun Wang, and Shigang Lu, Review of the electrochemical performance and interfacial issues of high-nickel layered cathodes in inorganic all-solid-state batteries, Int. J. Miner. Metall. Mater., 29(2022), No. 5, pp. 1003-1018. https://doi.org/10.1007/s12613-022-2453-0

Citation:

PDF( 3661 KB)

Invited Review

Review of the electrochemical performance and interfacial issues of high-nickel layered cathodes in inorganic all-solid-state batteries

+ Author Affiliations

Corresponding author:
Shigang Lu E-mail: lusg8867@163.com
Received: 9 February 2022; Revised: 27 February 2022; Accepted: 1 March 2022; Available online: 2 March 2022

Abstract

Abstract

All-solid-state batteries potentially exhibit high specific energy and high safety, which is one of the development directions for next-generation lithium-ion batteries. The compatibility of all-solid composite electrodes with high-nickel layered cathodes and inorganic solid electrolytes is one of the important problems to be solved. In addition, the interface and mechanical problems of high-nickel layered cathodes and inorganic solid electrolyte composite electrodes have not been thoroughly addressed. In this paper, the possible interface and mechanical problems in the preparation of high-nickel layered cathodes and inorganic solid electrolytes and their interface reaction during charge–discharge and cycling are reviewed. The mechanical contact problems from phenomena to internal causes are also analyzed. Uniform contact between the high-nickel cathode and solid electrolyte in space and the ionic conductivity of the solid electrolyte are the prerequisites for the good performance of a high-nickel layered cathode. The interface reaction and contact loss between the high-nickel layered cathode and solid electrolyte in the composite electrode directly affect the passage of ions and electrons into the active material. The buffer layer constructed on the high-nickel cathode surface can prevent direct contact between the active material and electrolyte and slow down their interface reaction. An appropriate protective layer can also slow down the interface contact loss by reducing the volume change of the high-nickel layered cathode during charge and discharge. Finally, the following recommendations are put forward to realize the development vision of high-nickel layered cathodes: (1) develop electrochemical systems for high-nickel layered cathodes and inorganic solid electrolytes; (2) elucidate the basic science of interface and electrode processes between high-nickel layered cathodes and inorganic solid electrolytes, clarify the mechanisms of the interfacial chemical and electrochemical reactions between the two materials, and address the intrinsic safety issues; (3) strengthen the development of research and engineering technologies and their preparation methods for composite electrodes with high-nickel layered cathodes and solid electrolytes and promote the industrialization of all-solid-state batteries.
- all-solid-state lithium-ion battery;
- high-nickel layered cathode;
- inorganic solid-state electrolyte;
- cathodes and electrolyte interface

FullText(HTML)

Supplements(0)

References(96)

References

[1]	C.N. Zou, Q. Zhao, G.S. Zhang, and B. Xiong, Energy revolution: From a fossil energy era to a new energy era, Nat. Gas Ind. B, 3(2016), No. 1, p. 1. doi: 10.1016/j.ngib.2016.02.001
[2]	Y.J. Song, Q. Ji, Y.J. Du, and J.B. Geng, The dynamic dependence of fossil energy, investor sentiment and renewable energy stock markets, Energy Econ., 84(2019), art. No. 104564. doi: 10.1016/j.eneco.2019.104564
[3]	T. Fujita, H. Chen, K.T. Wang, C.L. He, Y.B. Wang, G. Dodbiba, and Y.Z. Wei, Reduction, reuse and recycle of spent Li-ion batteries for automobiles: A review, Int. J. Miner. Metall. Mater., 28(2021), No. 2, p. 179. doi: 10.1007/s12613-020-2127-8
[4]	T. Kim, W.T. Song, D.Y. Son, L.K. Ono, and Y.B. Qi, Lithium-ion batteries: Outlook on present, future, and hybridized technologies, J. Mater. Chem. A, 7(2019), No. 7, p. 2942. doi: 10.1039/C8TA10513H
[5]	S.S. Zhang, Problems and their origins of Ni-rich layered oxide cathode materials, Energy Storage Mater., 24(2020), p. 247. doi: 10.1016/j.ensm.2019.08.013
[6]	A.K.C. Estandarte, J.C. Diao, A.V. Llewellyn, A. Jnawali, T.M.M. Heenan, S.R. Daemi, J.J. Bailey, S. Cipiccia, D. Batey, X.W. Shi, C. Rau, D.J.L. Brett, R. Jervis, I.K. Robinson, and P.R. Shearing, Operando Bragg coherent diffraction imaging of LiNi_0.8Mn_0.1Co_0.1O₂ primary particles within commercially printed NMC811 electrode sheets, ACS Nano, 15(2021), No. 1, p. 1321. doi: 10.1021/acsnano.0c08575
[7]	J. Jie, Y.L. Liu, L.N. Cong, B.H. Zhang, W. Lu, X.M. Zhang, J. Liu, H.M. Xie, and L.Q. Sun, High-performance PVDF-HFP based gel polymer electrolyte with a safe solvent in Li metal polymer battery, J. Energy Chem., 49(2020), p. 80. doi: 10.1016/j.jechem.2020.01.019
[8]	S. Randau, D.A. Weber, O. Kötz, R. Koerver, P. Braun, A. Weber, E. Ivers-Tiffée, T. Adermann, J. Kulisch, W.G. Zeier, F.H. Richter, and J. Janek, Benchmarking the performance of all-solid-state lithium batteries, Nat. Energy, 5(2020), No. 3, p. 259. doi: 10.1038/s41560-020-0565-1
[9]	Z.H. Zhang, T. Wei, J.H. Lu, Q.M. Xiong, Y.H. Ji, Z.Y. Zhu, and L.T. Zhang, Practical development and challenges of garnet-structured Li₇La₃Zr₂O₁₂ electrolytes for all-solid-state lithium-ion batteries: A review, Int. J. Miner. Metall. Mater., 28(2021), No. 10, p. 1565. doi: 10.1007/s12613-020-2239-1
[10]	H. Muramatsu, A. Hayashi, T. Ohtomo, S. Hama, and M. Tatsumisago, Structural change of Li₂S–P₂S₅ sulfide solid electrolytes in the atmosphere, Solid State Ionics, 182(2011), No. 1, p. 116. doi: 10.1016/j.ssi.2010.10.013
[11]	C.W. Sun, J. Liu, Y.D. Gong, D.P. Wilkinson, and J.J. Zhang, Recent advances in all-solid-state rechargeable lithium batteries, Nano Energy, 33(2017), p. 363. doi: 10.1016/j.nanoen.2017.01.028
[12]	A. Kuhn, V. Duppel, and B.V. Lotsch, Tetragonal Li₁₀GeP₂S₁₂ and Li₇GePS₈ – Exploring the Li ion dynamics in LGPS Li electrolytes, Energy Environ. Sci., 6(2013), No. 12, p. 3548. doi: 10.1039/c3ee41728j
[13]	G.Z. Liu, W. Weng, Z.H. Zhang, L.P. Wu, J. Yang, and X.Y. Yao, Densified Li₆PS₅Cl nanorods with high ionic conductivity and improved critical current density for all-solid-state lithium batteries, Nano Lett., 20(2020), No. 9, p. 6660. doi: 10.1021/acs.nanolett.0c02489
[14]	Q. Liu, Q.P. Yu, S. Li, S.W. Wang, L.H. Zhang, B.Y. Cai, D. Zhou, and B.H. Li, Safe LAGP-based all solid-state Li metal batteries with plastic super-conductive interlayer enabled by in situ solidification, Energy Storage Mater., 25(2020), p. 613. doi: 10.1016/j.ensm.2019.09.023
[15]	T. Asano, A. Sakai, S. Ouchi, M. Sakaida, A. Miyazaki, and S. Hasegawa, Solid halide electrolytes with high lithium-ion conductivity for application in 4 V class bulk-type all-solid-state batteries, Adv. Mater., 30(2018), No. 44, art. No. 1803075. doi: 10.1002/adma.201803075
[16]	K.H. Park, K. Kaup, A. Assoud, Q. Zhang, X.H. Wu, and L.F. Nazar, High-voltage superionic halide solid electrolytes for all-solid-state Li-ion batteries, ACS Energy Lett., 5(2020), No. 2, p. 533. doi: 10.1021/acsenergylett.9b02599
[17]	N. Ohta, K. Takada, I. Sakaguchi, L.Q. Zhang, R.Z. Ma, K. Fukuda, M. Osada, and T. Sasaki, LiNbO₃-coated LiCoO₂ as cathode material for all solid-state lithium secondary batteries, Electrochem. Commun., 9(2007), No. 7, p. 1486. doi: 10.1016/j.elecom.2007.02.008
[18]	A. Sakuda, A. Hayashi, and M. Tatsumisago, Interfacial observation between LiCoO₂ electrode and Li₂S–P₂S₅ solid electrolytes of all-solid-state lithium secondary batteries using transmission electron microscopy, Chem. Mater., 22(2010), No. 3, p. 949. doi: 10.1021/cm901819c
[19]	L.Y. Wang, L.F. Wang, R. Wang, R. Xu, C. Zhan, W. Yang, and G.C. Liu, Solid electrolyte–electrode interface based on buffer therapy in solid-state lithium batteries, Int. J. Miner. Metall. Mater., 28(2021), No. 10, p. 1584. doi: 10.1007/s12613-021-2278-2
[20]	M. Dixit, B. Markovsky, F. Schipper, D. Aurbach, and D.T. Major, Origin of structural degradation during cycling and low thermal stability of Ni-rich layered transition metal-based electrode materials, J. Phys. Chem. C, 121(2017), No. 41, p. 22628. doi: 10.1021/acs.jpcc.7b06122
[21]	S.K. Heiskanen, N. Laszczynski, and B.L. Lucht, Perspective—Surface reactions of electrolyte with LiNi_xCo_yMn_zO₂ cathodes for lithium ion batteries, J. Electrochem. Soc., 167(2020), No. 10, art. No. 100519. doi: 10.1149/1945-7111/ab981c
[22]	R.A. House, J.J. Marie, M.A. Pérez-Osorio, G.J. Rees, E. Boivin, and P.G. Bruce, The role of O₂ in O-redox cathodes for Li-ion batteries, Nat. Energy, 6(2021), No. 8, p. 781. doi: 10.1038/s41560-021-00780-2
[23]	X.N. Li, J.W. Liang, N. Chen, J. Luo, K.R. Adair, C.H. Wang, M.N. Banis, T.K. Sham, L. Zhang, S.Q. Zhao, S.G. Lu, H. Huang, R.Y. Li, and X.L. Sun, Water-mediated synthesis of a superionic halide solid electrolyte, Angew. Chem. Int. Ed., 58(2019), No. 46, p. 16427. doi: 10.1002/anie.201909805
[24]	S.X. Deng, X. Li, Z.H. Ren, W.H. Li, J. Luo, J.W. Liang, J.N. Liang, M.N. Banis, M.S. Li, Y. Zhao, X.N. Li, C.H. Wang, Y.P. Sun, Q. Sun, R.Y. Li, Y.F. Hu, H. Huang, L. Zhang, S.G. Lu, J. Luo, and X.L. Sun, Dual-functional interfaces for highly stable Ni-rich layered cathodes in sulfide all-solid-state batteries, Energy Storage Mater., 27(2020), p. 117. doi: 10.1016/j.ensm.2020.01.009
[25]	X.N. Li, J.W. Liang, J. Luo, M.N. Banis, C.H. Wang, W.H. Li, S.X. Deng, C. Yu, F.P. Zhao, Y.F. Hu, T.K. Sham, L. Zhang, S.Q. Zhao, S.G. Lu, H. Huang, R.Y. Li, K.R. Adair, and X.L. Sun, Air-stable Li₃InCl₆ electrolyte with high voltage compatibility for all-solid-state batteries, Energy Environ. Sci., 12(2019), No. 9, p. 2665. doi: 10.1039/C9EE02311A
[26]	X.N. Li, J.W. Liang, K.R. Adair, J.J. Li, W.H. Li, F.P. Zhao, Y.F. Hu, T.K. Sham, L. Zhang, S.Q. Zhao, S.G. Lu, H. Huang, R.Y. Li, N. Chen, and X.L. Sun, Origin of superionic Li₃Y_1−xIn_xCl₆ halide solid electrolytes with high humidity tolerance, Nano Lett., 20(2020), No. 6, p. 4384. doi: 10.1021/acs.nanolett.0c01156
[27]	Q. Zhang, D.X. Cao, Y. Ma, A. Natan, P. Aurora, and H.L. Zhu, Sulfide-based solid-state electrolytes: Synthesis, stability, and potential for all-solid-state batteries, Adv. Mater., 31(2019), No. 44, art. No. 1901131. doi: 10.1002/adma.201901131
[28]	H.J. Noh, S. Youn, C.S. Yoon, and Y.K. Sun, Comparison of the structural and electrochemical properties of layered Li[Ni_xCo_yMn_z]O₂ (x = 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries, J. Power Sources, 233(2013), p. 121. doi: 10.1016/j.jpowsour.2013.01.063
[29]	X.L. Li, Y.M. Sun, Z.Y. Wang, X.Q. Wang, H.Z. Zhang, D.W. Song, L.Q. Zhang, and L.Y. Zhu, High-rate and long-life Ni-rich oxide cathode under high mass loading for sulfide-based all-solid-state lithium batteries, Electrochim. Acta, 391(2021), art. No. 138917. doi: 10.1016/j.electacta.2021.138917
[30]	T. Yoshinari, R. Koerver, P. Hofmann, Y. Uchimoto, W.G. Zeier, and J. Janek, Interfacial stability of phosphate-NASICON solid electrolytes in Ni-rich NCM cathode-based solid-state batteries, ACS Appl. Mater. Interfaces, 11(2019), No. 26, p. 23244. doi: 10.1021/acsami.9b05995
[31]	Y.J. Nam, D.Y. Oh, S.H. Jung, and Y.S. Jung, Toward practical all-solid-state lithium-ion batteries with high energy density and safety: Comparative study for electrodes fabricated by dry- and slurry-mixing processes, J. Power Sources, 375(2018), p. 93. doi: 10.1016/j.jpowsour.2017.11.031
[32]	X.S. Liu, B.Z. Zheng, J. Zhao, W.M. Zhao, Z.T. Liang, Y. Su, C.P. Xie, K. Zhou, Y.X. Xiang, J.P. Zhu, H.C. Wang, G.M. Zhong, Z.L. Gong, J.Y. Huang, and Y. Yang, Electrochemo–mechanical effects on structural integrity of Ni-rich cathodes with different microstructures in all solid-state batteries, Adv. Energy Mater., 11(2021), No. 8, art. No. 2003583. doi: 10.1002/aenm.202003583
[33]	S.H. Jung, U.H. Kim, J.H. Kim, S. Jun, C.S. Yoon, Y.S. Jung, and Y.K. Sun, Ni-rich layered cathode materials with electrochemo–mechanically compliant microstructures for all-solid-state Li batteries, Adv. Energy Mater., 10(2020), No. 6, art. No. 1903360. doi: 10.1002/aenm.201903360
[34]	F. Hippauf, B. Schumm, S. Doerfler, H. Althues, S. Fujiki, T. Shiratsuchi, T. Tsujimura, Y. Aihara, and S. Kaskel, Overcoming binder limitations of sheet-type solid-state cathodes using a solvent-free dry-film approach, Energy Storage Mater., 21(2019), p. 390. doi: 10.1016/j.ensm.2019.05.033
[35]	Y. Han, S.H. Jung, H. Kwak, S. Jun, H.H. Kwak, J.H. Lee, S.T. Hong, and Y.S. Jung, Single- or poly-crystalline Ni-rich layered cathode, sulfide or halide solid electrolyte: Which will be the winners for all-solid-state batteries? Adv. Energy Mater., 11(2021), No. 21, art. No. 2100126. doi: 10.1002/aenm.202100126
[36]	J.M. Doux, Y. Yang, D.H.S. Tan, H. Nguyen, E.A. Wu, X.F. Wang, A. Banerjee, and Y.S. Meng, Pressure effects on sulfide electrolytes for all solid-state batteries, J. Mater. Chem. A, 8(2020), No. 10, p. 5049. doi: 10.1039/C9TA12889A
[37]	D.Y. Oh, D.H. Kim, S.H. Jung, J.G. Han, N.S. Choi, and Y.S. Jung, Single-step wet-chemical fabrication of sheet-type electrodes from solid-electrolyte precursors for all-solid-state lithium-ion batteries, J. Mater. Chem. A, 5(2017), No. 39, p. 20771. doi: 10.1039/C7TA06873E
[38]	G. Bucci, B. Talamini, A.R. Balakrishna, Y.M. Chiang, and W.C. Carter, Mechanical instability of electrode–electrolyte interfaces in solid-state batteries, Phys. Rev. Mater., 2(2018), No. 10, art. No. 105407. doi: 10.1103/PhysRevMaterials.2.105407
[39]	H. Cha, J. Kim, H. Lee, N. Kim, J. Hwang, J. Sung, M. Yoon, K. Kim, and J. Cho, Boosting reaction homogeneity in high-energy lithium-ion battery cathode materials, Adv. Mater., 32(2020), No. 39, art. No. 2003040. doi: 10.1002/adma.202003040
[40]	H.H. Ryu, K.J. Park, C.S. Yoon, and Y.K. Sun, Capacity fading of Ni-rich Li[Ni_xCo_yMn_1−x−y]O₂ (0.6 ≤ x ≤ 0.95) cathodes for high-energy-density lithium-ion batteries: Bulk or surface degradation? Chem. Mater., 30(2018), No. 3, p. 1155. doi: 10.1021/acs.chemmater.7b05269
[41]	H.H. Ryu, G.T. Park, C.S. Yoon, and Y.K. Sun, Microstructural degradation of Ni-rich Li[Ni_xCo_yMn_1−x−y]O₂ cathodes during accelerated calendar aging, Small, 14(2018), No. 45, art. No. 1803179. doi: 10.1002/smll.201803179
[42]	C.K. Yang, L.Y. Qi, Z.C. Zuo, R.N. Wang, M. Ye, J. Lu, and H.H. Zhou, Insights into the inner structure of high-nickel agglomerate as high-performance lithium-ion cathodes, J. Power Sources, 331(2016), p. 487. doi: 10.1016/j.jpowsour.2016.09.068
[43]	P.F. Yan, J.M. Zheng, J. Liu, B.Q. Wang, X.P. Cheng, Y.F. Zhang, X.L. Sun, C.M. Wang, and J.G. Zhang, Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries, Nat. Energy, 3(2018), No. 7, p. 600. doi: 10.1038/s41560-018-0191-3
[44]	H.H. Sun, H.H. Ryu, U.H. Kim, J.A. Weeks, A. Heller, Y.K. Sun, and C.B. Mullins, Beyond doping and coating: Prospective strategies for stable high-capacity layered Ni-rich cathodes, ACS Energy Lett., 5(2020), No. 4, p. 1136. doi: 10.1021/acsenergylett.0c00191
[45]	A. Sakuda, K. Kuratani, M. Yamamoto, M. Takahashi, T. Takeuchi, and H. Kobayashi, All-solid-state battery electrode sheets prepared by a slurry coating process, J. Electrochem. Soc., 164(2017), No. 12, p. A2474. doi: 10.1149/2.0951712jes
[46]	C.W. Wang, K. Fu, S.P. Kammampata, D.W. McOwen, A.J. Samson, L. Zhang, G.T. Hitz, A.M. Nolan, E.D. Wachsman, Y.F. Mo, V. Thangadurai, and L.B. Hu, Garnet-type solid-state electrolytes: Materials, interfaces, and batteries, Chem. Rev., 120(2020), No. 10, p. 4257. doi: 10.1021/acs.chemrev.9b00427
[47]	T. Kato, T. Hamanaka, K. Yamamoto, T. Hirayama, F. Sagane, M. Motoyama, and Y. Iriyama, In-situ Li₇La₃Zr₂O₁₂/LiCoO₂ interface modification for advanced all-solid-state battery, J. Power Sources, 260(2014), p. 292. doi: 10.1016/j.jpowsour.2014.02.102
[48]	K. Park, B.C. Yu, J.W. Jung, Y.T. Li, W.D. Zhou, H.C. Gao, S. Son, and J.B. Goodenough, Electrochemical nature of the cathode interface for a solid-state lithium-ion battery: Interface between LiCoO₂ and garnet-Li₇La₃Zr₂O₁₂, Chem. Mater., 28(2016), No. 21, p. 8051. doi: 10.1021/acs.chemmater.6b03870
[49]	C.S. Wu, J.T. Lou, J. Zhang, Z.Y. Chen, A. Kakar, B. Emley, Q. Ai, H. Guo, Y.L. Liang, J. Lou, Y. Yao, and Z. Fan, Current status and future directions of all-solid-state batteries with lithium metal anodes, sulfide electrolytes, and layered transition metal oxide cathodes, Nano Energy, 87(2021), art. No. 106081. doi: 10.1016/j.nanoen.2021.106081
[50]	W.B. Zhang, F.H. Richter, S.P. Culver, T. Leichtweiss, J.G. Lozano, C. Dietrich, P.G. Bruce, W.G. Zeier, and J. Janek, Degradation mechanisms at the Li₁₀GeP₂S₁₂/LiCoO₂ cathode interface in an all-solid-state lithium-ion battery, ACS Appl. Mater. Interfaces, 10(2018), No. 26, p. 22226. doi: 10.1021/acsami.8b05132
[51]	S. Noh, W.T. Nichols, M. Cho, and D. Shin, Importance of mixing protocol for enhanced performance of composite cathodes in all-solid-state batteries using sulfide solid electrolyte, J. Electroceram., 40(2018), No. 4, p. 293. doi: 10.1007/s10832-018-0129-y
[52]	R.C. Xu, X.H. Xia, S.Z. Zhang, D. Xie, X.L. Wang, and J.P. Tu, Interfacial challenges and progress for inorganic all-solid-state lithium batteries, Electrochim. Acta, 284(2018), p. 177. doi: 10.1016/j.electacta.2018.07.191
[53]	X.Y. Ke, Y. Wang, G.F. Ren, and C. Yuan, Towards rational mechanical design of inorganic solid electrolytes for all-solid-state lithium ion batteries, Energy Storage Mater., 26(2020), p. 313. doi: 10.1016/j.ensm.2019.08.029
[54]	Y.Y. Lu, Z.Y. Tu, and L.A. Archer, Stable lithium electrodeposition in liquid and nanoporous solid electrolytes, Nat. Mater., 13(2014), No. 10, p. 961. doi: 10.1038/nmat4041
[55]	T. Liu, Y.B. Zhang, R.J. Chen, S.X. Zhao, Y.H. Lin, C.W. Nan, and Y. Shen, Non-successive degradation in bulk-type all-solid-state lithium battery with rigid interfacial contact, Electrochem. Commun., 79(2017), p. 1. doi: 10.1016/j.elecom.2017.03.016
[56]	L.X. Bai, W.D. Xue, Y. Li, X.G. Liu, Y. Li, and J.L. Sun, The interfacial behaviours of all-solid-state lithium ion batteries, Ceram. Int., 44(2018), No. 7, p. 7319. doi: 10.1016/j.ceramint.2018.01.190
[57]	K. Lee, S. Kim, J. Park, S.H. Park, A. Coskun, D.S. Jung, W. Cho, and J.W. Choi, Selection of binder and solvent for solution-processed all-solid-state battery, J. Electrochem. Soc., 164(2017), No. 9, p. A2075. doi: 10.1149/2.1341709jes
[58]	J. Zhang, H.Y. Zhong, C. Zheng, Y. Xia, C. Liang, H. Huang, Y.P. Gan, X.Y. Tao, and W.K. Zhang, All-solid-state batteries with slurry coated LiNi_0.8Co_0.1Mn_0.1O₂ composite cathode and Li₆PS₅Cl electrolyte: Effect of binder content, J. Power Sources, 391(2018), p. 73. doi: 10.1016/j.jpowsour.2018.04.069
[59]	A. Bielefeld, D.A. Weber, and J. Janek, Modeling effective ionic conductivity and binder influence in composite cathodes for all-solid-state batteries, ACS Appl. Mater. Interfaces, 12(2020), No. 11, p. 12821. doi: 10.1021/acsami.9b22788
[60]	N. Delaporte, A. Darwiche, M. Léonard, G. Lajoie, H. Demers, D. Clément, R. Veillette, L. Rodrigue, M.L. Trudeau, C. Kim, and K. Zaghib, Facile formulation and fabrication of the cathode using a self-lithiated carbon for all-solid-state batteries, Sci. Rep., 10(2020), art. No. 11813. doi: 10.1038/s41598-020-68865-8
[61]	C.F. Liu, J.F. Yuan, R. Masse, X.X. Jia, W.C. Bi, Z. Neale, T. Shen, M. Xu, M. Tian, J.Q. Zheng, J.J. Tian, and G.Z. Cao, Interphases, interfaces, and surfaces of active materials in rechargeable batteries and perovskite solar cells, Adv. Mater., 33(2021), No. 22, art. No. 1905245. doi: 10.1002/adma.201905245
[62]	J. Haruyama, K. Sodeyama, L.Y. Han, K. Takada, and Y. Tateyama, Space–charge layer effect at interface between oxide cathode and sulfide electrolyte in all-solid-state lithium-ion battery, Chem. Mater., 26(2014), No. 14, p. 4248. doi: 10.1021/cm5016959
[63]	L.L. Wang, R.C. Xie, B.B. Chen, X.R. Yu, J. Ma, C. Li, Z.W. Hu, X.W. Sun, C.J. Xu, S.M. Dong, T.S. Chan, J. Luo, G.L. Cui, and L.Q. Chen, In-situ visualization of the space-charge-layer effect on interfacial lithium-ion transport in all-solid-state batteries, Nat. Commun., 11(2020), art. No. 5889. doi: 10.1038/s41467-020-19726-5
[64]	J. Zhang, C. Zheng, L.J. Li, Y. Xia, H. Huang, Y.P. Gan, C. Liang, X.P. He, X.Y. Tao, and W.K. Zhang, Unraveling the intra and intercycle interfacial evolution of Li₆PS₅Cl-based all-solid-state lithium batteries, Adv. Energy Mater., 10(2020), No. 4, art. No. 1903311. doi: 10.1002/aenm.201903311
[65]	L. Froboese, J.F. van der Sichel, T. Loellhoeffel, L. Helmers, and A. Kwade, Effect of microstructure on the ionic conductivity of an all solid-state battery electrode, J. Electrochem. Soc., 166(2019), No. 2, p. A318. doi: 10.1149/2.0601902jes
[66]	X.N. Li, J.W. Liang, X.F. Yang, K.R. Adair, C.H. Wang, F.P. Zhao, and X.L. Sun, Progress and perspectives on halide lithium conductors for all-solid-state lithium batteries, Energy Environ. Sci., 13(2020), No. 5, p. 1429. doi: 10.1039/C9EE03828K
[67]	L. Xu, S. Tang, Y. Cheng, K.Y. Wang, J.Y. Liang, C. Liu, Y.C. Cao, F. Wei, and L.Q. Mai, Interfaces in solid-state lithium batteries, Joule, 2(2018), No. 10, p. 1991. doi: 10.1016/j.joule.2018.07.009
[68]	Y.Z. Zhu, X.F. He, and Y.F. Mo, Origin of outstanding stability in the lithium solid electrolyte materials: Insights from thermodynamic analyses based on first-principles calculations, ACS Appl. Mater. Interfaces, 7(2015), No. 42, p. 23685. doi: 10.1021/acsami.5b07517
[69]	X.N. Li, J.W. Liang, J. Luo, C.H. Wang, X. Li, Q. Sun, R.Y. Li, L. Zhang, R. Yang, S.G. Lu, H. Huang, and X.L. Sun, High-performance Li–SeS_x all-solid-state lithium batteries, Adv. Mater., 31(2019), No. 17, art. No. 1808100. doi: 10.1002/adma.201808100
[70]	A. Banerjee, H.M. Tang, X.F. Wang, J.H. Cheng, H. Nguyen, M.H. Zhang, D.H.S. Tan, T.A. Wynn, E.A. Wu, J.M. Doux, T.P. Wu, L. Ma, G.E. Sterbinsky, M.S. D’Souza, S.P. Ong, and Y.S. Meng, Revealing nanoscale solid–solid interfacial phenomena for long-life and high-energy all-solid-state batteries, ACS Appl. Mater. Interfaces, 11(2019), No. 46, p. 43138. doi: 10.1021/acsami.9b13955
[71]	M.V. Reddy, C.M. Julien, A. Mauger, and K. Zaghib, Sulfide and oxide inorganic solid electrolytes for all-solid-state Li batteries: A review, Nanomaterials, 10(2020), No. 8, art. No. 1606. doi: 10.3390/nano10081606
[72]	N. Zhang, X.H. Long, Z. Wang, P.F. Yu, F.D. Han, J.M. Fu, G.X. Ren, Y.R. Wu, S. Zheng, W.C. Huang, C.S. Wang, H. Li, and X.S. Liu, Mechanism study on the interfacial stability of a lithium garnet-type oxide electrolyte against cathode materials, ACS Appl. Energy Mater., 1(2018), No. 11, p. 5968. doi: 10.1021/acsaem.8b01035
[73]	S. Wang, Q. Bai, A.M. Nolan, Y.S. Liu, S. Gong, Q. Sun, and Y.F. Mo, Lithium chlorides and bromides as promising solid-state chemistries for fast ion conductors with good electrochemical stability, Angew. Chem. Int. Ed., 58(2019), No. 24, p. 8039. doi: 10.1002/anie.201901938
[74]	Y.H. Xiao, Y. Wang, S.H. Bo, J.C. Kim, L.J. Miara, and G. Ceder, Understanding interface stability in solid-state batteries, Nat. Rev. Mater., 5(2020), No. 2, p. 105. doi: 10.1038/s41578-019-0157-5
[75]	D. Park, H. Park, Y. Lee, S.O. Kim, H.G. Jung, K.Y. Chung, J.H. Shim, and S. Yu, Theoretical design of lithium chloride superionic conductors for all-solid-state high-voltage lithium-ion batteries, ACS Appl. Mater. Interfaces, 12(2020), No. 31, p. 34806. doi: 10.1021/acsami.0c07003
[76]	N.Y. Park, H.H. Ryu, G.T. Park, T.C. Noh, and Y.K. Sun, Optimized Ni-rich NCMA cathode for electric vehicle batteries, Adv. Energy Mater., 11(2021), No. 9, art. No. 2003767. doi: 10.1002/aenm.202003767
[77]	B.Y. Zhu, Z.H. Yu, L. Meng, Z.Y. Xu, C.X. Lv, Y. Wang, G.Y. Wei, and J.K. Qu, The relationship between failure mechanism of nickel-rich layered oxide for lithium batteries and the research progress of coping strategies: A review, Ionics, 27(2021), No. 7, p. 2749. doi: 10.1007/s11581-021-04019-8
[78]	T. Bartsch, A.Y. Kim, F. Strauss, L. de Biasi, J.H. Teo, J. Janek, P. Hartmann, and T. Brezesinski, Indirect state-of-charge determination of all-solid-state battery cells by X-ray diffraction, Chem. Commun., 55(2019), No. 75, p. 11223. doi: 10.1039/C9CC04453A
[79]	L. de Biasi, A.O. Kondrakov, H. Geßwein, T. Brezesinski, P. Hartmann, and J. Janek, Between Scylla and Charybdis: Balancing among structural stability and energy density of layered NCM cathode materials for advanced lithium-ion batteries, J. Phys. Chem. C, 121(2017), No. 47, p. 26163. doi: 10.1021/acs.jpcc.7b06363
[80]	R. Koerver, W.B. Zhang, L. de Biasi, S. Schweidler, A.O. Kondrakov, S. Kolling, T. Brezesinski, P. Hartmann, W.G. Zeier, and J. Janek, Chemo-mechanical expansion of lithium electrode materials – On the route to mechanically optimized all-solid-state batteries, Energy Environ. Sci., 11(2018), No. 8, p. 2142. doi: 10.1039/C8EE00907D
[81]	R. Koerver, I. Aygün, T. Leichtweiß, C. Dietrich, W.B. Zhang, J.O. Binder, P. Hartmann, W.G. Zeier, and J. Janek, Capacity fade in solid-state batteries: Interphase formation and chemomechanical processes in nickel-rich layered oxide cathodes and lithium thiophosphate solid electrolytes, Chem. Mater., 29(2017), No. 13, p. 5574. doi: 10.1021/acs.chemmater.7b00931
[82]	T. Shi, Y.Q. Zhang, Q.S. Tu, Y.H. Wang, M.C. Scott, and G. Ceder, Characterization of mechanical degradation in an all-solid-state battery cathode, J. Mater. Chem. A, 8(2020), No. 34, p. 17399. doi: 10.1039/D0TA06985J
[83]	Y.H. Xiao, L.J. Miara, Y. Wang, and G. Ceder, Computational screening of cathode coatings for solid-state batteries, Joule, 3(2019), No. 5, p. 1252. doi: 10.1016/j.joule.2019.02.006
[84]	W.D. Richards, L.J. Miara, Y. Wang, J.C. Kim, and G. Ceder, Interface stability in solid-state batteries, Chem. Mater., 28(2016), No. 1, p. 266. doi: 10.1021/acs.chemmater.5b04082
[85]	F. Walther, F. Strauss, X.H. Wu, B. Mogwitz, J. Hertle, J. Sann, M. Rohnke, T. Brezesinski, and J. Janek, The working principle of a Li₂CO₃/LiNbO₃ coating on NCM for thiophosphate-based all-solid-state batteries, Chem. Mater., 33(2021), No. 6, p. 2110. doi: 10.1021/acs.chemmater.0c04660
[86]	X.L. Li, Q.F. Sun, Z.Y. Wang, D.W. Song, H.Z. Zhang, X.X. Shi, C.L. Li, L.Q. Zhang, and L.Y. Zhu, Outstanding electrochemical performances of the all-solid-state lithium battery using Ni-rich layered oxide cathode and sulfide electrolyte, J. Power Sources, 456(2020), art. No. 227997. doi: 10.1016/j.jpowsour.2020.227997
[87]	J.S. Lee and Y.J. Park, Comparison of LiTaO₃ and LiNbO₃ surface layers prepared by post- and precursor-based coating methods for Ni-rich cathodes of all-solid-state batteries, ACS Appl. Mater. Interfaces, 13(2021), No. 32, p. 38333. doi: 10.1021/acsami.1c10294
[88]	F. Strauss, J.H. Teo, J. Maibach, A.Y. Kim, A. Mazilkin, J. Janek, and T. Brezesinski, Li₂ZrO₃-coated NCM622 for application in inorganic solid-state batteries: Role of surface carbonates in the cycling performance, ACS Appl. Mater. Interfaces, 12(2020), No. 51, p. 57146. doi: 10.1021/acsami.0c18590
[89]	H. Visbal, Y. Aihara, S. Ito, T. Watanabe, Y. Park, and S. Doo, The effect of diamond-like carbon coating on LiNi_0.8Co_0.15Al_0.05O₂ particles for all solid-state lithium-ion batteries based on Li₂S–P₂S₅ glass-ceramics, J. Power Sources, 314(2016), p. 85. doi: 10.1016/j.jpowsour.2016.02.088
[90]	J. Yang, B.X. Huang, J.Y. Yin, X.Y. Yao, G. Peng, J. Zhou, and X.X. Xu, Structure integrity endowed by a Ti-containing surface layer towards ultrastable LiNi_0.8Co_0.15Al_0.05O₂ for all-solid-state lithium batteries, J. Electrochem. Soc., 163(2016), No. 8, p. A1530. doi: 10.1149/2.0331608jes
[91]	A.Y. Kim, F. Strauss, T. Bartsch, J.H. Teo, T. Hatsukade, A. Mazilkin, J. Janek, P. Hartmann, and T. Brezesinski, Stabilizing effect of a hybrid surface coating on a Ni-rich NCM cathode material in all-solid-state batteries, Chem. Mater., 31(2019), No. 23, p. 9664. doi: 10.1021/acs.chemmater.9b02947
[92]	Y.J. Kim, R. Rajagopal, S. Kang, and K.S. Ryu, Novel dry deposition of LiNbO₃ or Li₂ZrO₃ on LiNi_0.6Co_0.2Mn_0.2O₂ for high performance all-solid-state lithium batteries, Chem. Eng. J., 386(2020), art. No. 123975. doi: 10.1016/j.cej.2019.123975
[93]	Y.G. Lee, S. Fujiki, C. Jung, N. Suzuki, N. Yashiro, R. Omoda, D.S. Ko, T. Shiratsuchi, T. Sugimoto, S. Ryu, J.H. Ku, T. Watanabe, Y. Park, Y. Aihara, D. Im, and I.T. Han, High-energy long-cycling all-solid-state lithium metal batteries enabled by silver–carbon composite anodes, Nat. Energy, 5(2020), No. 4, p. 299. doi: 10.1038/s41560-020-0575-z
[94]	X.L. Li, L.B. Jin, D.W. Song, H.Z. Zhang, X.X. Shi, Z.Y. Wang, L.Q. Zhang, and L.Y. Zhu, LiNbO₃-coated LiNi_0.8Co_0.1Mn_0.1O₂ cathode with high discharge capacity and rate performance for all-solid-state lithium battery, J. Energy Chem., 40(2020), p. 39. doi: 10.1016/j.jechem.2019.02.006
[95]	Y.B. Zhang, X. Sun, D.X. Cao, G.H. Gao, Z.Z. Yang, H.L. Zhu, and Y. Wang, Self-stabilized LiNi_0.8Mn_0.1Co_0.1O₂ in thiophosphate-based all-solid-state batteries through extra LiOH, Energy Storage Mater., 41(2021), p. 505. doi: 10.1016/j.ensm.2021.06.024
[96]	F.D. Han, J. Yue, C. Chen, N. Zhao, X.L. Fan, Z.H. Ma, T. Gao, F. Wang, X.X. Guo, and C.S. Wang, Interphase engineering enabled all-ceramic lithium battery, Joule, 2(2018), No. 3, p. 497. doi: 10.1016/j.joule.2018.02.007