Industrial application prospects and key issues of the pure-hydrogen reduction process

Lei Wang; Peimin Guo; Lingbing Kong; Pei Zhao

doi:10.1007/s12613-022-2478-4

Volume 29 Issue 10

Oct. 2022

Turn off MathJax

Article Contents

Article Navigation > International Journal of Minerals, Metallurgy and Materials > 2022 > 29(10): 1922-1931

Lei Wang, Peimin Guo, Lingbing Kong, and Pei Zhao, Industrial application prospects and key issues of the pure-hydrogen reduction process, Int. J. Miner. Metall. Mater., 29(2022), No. 10, pp. 1922-1931. https://doi.org/10.1007/s12613-022-2478-4

Cite this article as:

Lei Wang, Peimin Guo, Lingbing Kong, and Pei Zhao, Industrial application prospects and key issues of the pure-hydrogen reduction process, Int. J. Miner. Metall. Mater., 29(2022), No. 10, pp. 1922-1931. https://doi.org/10.1007/s12613-022-2478-4

Citation:

PDF( 1477 KB)

Research Article

Industrial application prospects and key issues of the pure-hydrogen reduction process

+ Author Affiliations

Corresponding author:
Peimin Guo E-mail: guopm@pku.org.cn
Received: 23 December 2021; Revised: 21 March 2022; Accepted: 21 March 2022; Available online: 23 March 2022

Abstract

Abstract

The industrial application prospect and key issues in basic theory and application are discussed by the methods of theoretical analysis and calculation to promote the development of the pure-hydrogen reduction process. According to the discussion of thermodynamics and kinetics of pure-hydrogen reduction reaction, the reduction reaction of iron oxide by pure hydrogen is an endothermic reaction, and the reaction rate of hydrogen reduction is significantly faster than that of carbon reduction. To explore the feasibility of the industrial applications of pure-hydrogen reduction, we design the hydrogen reduction reactor and process with reference to the industrialized hydrogen-rich reduction process and put forward the methods of appropriately increasing the reduction temperature, pressure, and temperature of iron ore into the furnace to accelerate the reaction rate and promote the reduction of iron oxide. The key technical parameters in engineering applications, such as hydrogen consumption, circulating gas volume, and heat balance, are discussed by theoretical calculations, and the optimized parameter values are proposed. The process parameters, cost, advantages, and disadvantages of various current hydrogen production methods are compared, and the results show that hydrogen production by natural gas reforming has a good development prospect. Through the discussion of the corrosion mechanism of high-temperature and high-pressure hydrogen on heat-resistant steel materials and the corrosion mechanism of H₂S in the hydrogen gas on steel, the technical ideas of developing new metal temperature-resistant materials, metal coating materials, and controlling gas composition are put forward to provide guidance for the selection of heater and reactor materials. Finally, the key factors affecting the smooth operation of the hydrogen reduction process in engineering applications are analyzed, offering a reference for the industrial application of the pure-hydrogen reduction process.
- pure hydrogen reduction;
- process design;
- engineering application;
- reactor material;
- sulfur and nitrogen balance

FullText(HTML)

Supplements(0)

References(35)

References

[1]	D. Spreitzer and J. Schenk, Reduction of iron oxides with hydrogen—A review, Steel Res. Int., 90(2019), No. 10, art. No. 1900108. doi: 10.1002/srin.201900108
[2]	H. Xu, Z.S. Zou, Y.S. Zhou, Z.Y. Li, and A.B. Yu, Preliminary numerical simulation of shaft furnace process for DRI production, J. Mater. Metall., 8(2009), No. 1, p. 7.
[3]	Z.W. Zhao, F.L. Kong, L.G. Tong, S.W. Yin, Y.R. Xie, and L.Wang, Analysis of CO₂ emission reduction path and potential of China’s steel industry under the “3060 target”, Iron Steel, 57(2022), No. 2, p. 167.
[4]	Z.Y. Xu and B.C. Wu, Simulating study on direct reduction of iron ore by midrex process, Gangtie, 22(1987), No. 12, p. 8.
[5]	M.H. Bai and Y.X. Fu, Design method of reduction segment parameters of the gas-based direct reduction shaft furance, J. Iron. Steel Res., 27(2015), No. 9, p. 21.
[6]	F. Li, M.S. Chu, J. Tang, and Z.G. Liu, Environmental impact analysis of hydrogen shaft furnace-electric furnace process, China Metall., 31(2021), No. 9, p. 104.
[7]	S. Sarkar, R. Bhattacharya, G.G. Roy, and P.K. Sen, Modeling MIDREX based process configurations for energy and emission analysis, Steel Res. Int., 89(2018), No. 2, art. No. 1700248. doi: 10.1002/srin.201700248
[8]	X.N. Wang, G.Q. Fu, W. Li, and M.Y. Zhu, Numerical simulation and optimization of flash reduction of iron ore particles with hydrogen-rich gases, Powder Technol., 366(2020), p. 587. doi: 10.1016/j.powtec.2020.02.075
[9]	H. Hamadeh, O. Mirgaux, and F. Patisson, Detailed modeling of the direct reduction of iron ore in a shaft furnace, Materials (Basel), 11(2018), No. 10, art. No. 1865.
[10]	M.S. Valipour, M.Y. Motamed Hashemi, and Y. Saboohi, Mathematical modeling of the reaction in an iron ore pellet using a mixture of hydrogen, water vapor, carbon monoxide and carbon dioxide: An isothermal study, Adv. Powder Technol., 17(2006), No. 3, p. 277. doi: 10.1163/156855206777213375
[11]	M. Kazemi, M.S. Pour, and S.C. Du, Experimental and modeling study on reduction of hematite pellets by hydrogen gas, Metall. Mater. Trans. B, 48(2017), No. 2, p. 1114. doi: 10.1007/s11663-016-0895-3
[12]	F. Patisson and O. Mirgaux, Hydrogen ironmaking: How it works, Metals, 10(2020), No. 7, art. No. 922. doi: 10.3390/met10070922
[13]	F.M. Mohsenzadeh, H. Payab, M.A. Abdoli, and Z. Abedi, An environmental study on Persian direct reduction (PERED®) technology: Comparing capital cost and energy saving with MIDREX® technology, Ekoloji, 27(2018), No. 106, p. 959.
[14]	A. Bonalde, A. Henriquez, and M. Manrique, Kinetic analysis of the iron oxide reduction using hydrogen–carbon monoxide mixtures as reducing agent, ISIJ Int., 45(2005), No. 9, p. 1255. doi: 10.2355/isijinternational.45.1255
[15]	J. Tang, M.S. Chu, F. Li, C. Feng, Z.G. Liu, and Y.S. Zhou, Development and progress on hydrogen metallurgy, Int. J. Miner. Metall. Mater., 27(2020), No. 6, p. 713. doi: 10.1007/s12613-020-2021-4
[16]	A. Abdelrahim, M. Iljana, M. Omran, T. Vuolio, H. Bartusch, and T. Fabritius, Influence of H₂–H₂O content on the reduction of acid iron ore pellets in a CO–CO₂–N₂ reducing atmosphere, ISIJ Int., 60(2020), No. 10, p. 2206. doi: 10.2355/isijinternational.ISIJINT-2019-734
[17]	B.L. Hou, H.Y. Zhang, H.Z. Li, and Q.S. Zhu, Study on kinetics of iron oxide reduction by hydrogen, Chin. J. Chem. Eng., 20(2012), No. 1, p. 10. doi: 10.1016/S1004-9541(12)60357-7
[18]	P. Cavaliere, Direct reduced iron: Most efficient technologies for greenhouse emissions abatement, [in] Clean Ironmaking and Steelmaking Processes, Springer, Cham, 2019, p. 419.
[19]	Y. Gordon and S. Kumar, Selection of ironmaking technology: Principles and risks, Trans. Indian Inst. Met., 66(2013), No. 5-6, p. 501. doi: 10.1007/s12666-013-0267-5
[20]	X. Jiang, L. Wang, and F.M. Shen, Shaft furnace direct reduction technology—Midrex and energiron, Adv. Mater. Res., 805-806(2013), p. 654. doi: 10.4028/www.scientific.net/AMR.805-806.654
[21]	P.M. Guo and P. Zhao, Theory and Technology for Fast Metallurgy at Low Temperature, Metallurgical Industry Press, Beijing, 2020, p. 111.
[22]	W.G. Liu, H.B. Zuo, J.S. Wang, Q.G. Xue, B.L. Ren, and F. Yang, The production and application of hydrogen in steel industry, Int. J. Hydrogen. Energy, 46(2021), No. 17, p. 10548. doi: 10.1016/j.ijhydene.2020.12.123
[23]	A. Bhaskar, M. Assadi, and H.N. Somehsaraei, Decarbonization of the iron and steel industry with direct reduction of iron ore with green hydrogen, Energies, 13(2020), No. 3, art. No. 758. doi: 10.3390/en13030758
[24]	M. Ren, P.T. Lu, X.R. Liu, et al., Decarbonizing China's iron and steel industry from the supply and demand sides for carbon neutrality, Appl. Energy, 298(2021), art. No. 117209. doi: 10.1016/j.apenergy.2021.117209
[25]	L. Shao, X.N. Zhang, C.X. Zhao, Y.X. Qu, H. Saxén, and Z.S. Zou, Computational analysis of hydrogen reduction of iron oxide pellets in a shaft furnace process, Renew. Energy, 179(2021), p. 1537. doi: 10.1016/j.renene.2021.07.108
[26]	X.L. Wang, Metallurgy of Iron and Steel (Ironmaking), Metallurgical Industry Press, Beijing, 2009, p. 250.
[27]	Midrex Technologies Inc., 2020 World Direct Reduction Statistics, Midrex Technologies Inc., Charlotte [2021-10-10]. https://www.midrex.com/wp-content/uploads/Midrex-STATSbookprint-2020.Final_.pdf
[28]	X.Q. Zhang, The development trend of and suggestions for China’s hydrogen energy industry, Engineering, 7(2021), No. 6, p. 719. doi: 10.1016/j.eng.2021.04.012
[29]	J.H. Niu, Research on the hydrogen production technology, IOP Conf. Ser.: Earth Environ. Sci., 813(2021), No. 1, art. No. 012004. doi: 10.1088/1755-1315/813/1/012004
[30]	J. Yamabe, S. Matsuoka, and Y. Murakami, Surface coating with a high resistance to hydrogen entry under high-pressure hydrogen-gas environment, Int. J. Hydrogen Energy, 38(2013), No. 24, p. 10141. doi: 10.1016/j.ijhydene.2013.05.152
[31]	J. Yamabe, O. Takakuwa, H. Matsunaga, H. Itoga, and S. Matsuoka, Hydrogen diffusivity and tensile-ductility loss of solution-treated austenitic stainless steels with external and internal hydrogen, Int. J. Hydrogen Energy, 42(2017), No. 18, p. 13289. doi: 10.1016/j.ijhydene.2017.04.055
[32]	H.J. Guo. Metallurgical Physical Chemistry, Metallurgical Industry Press, Beijing, 2006, p.315.
[33]	Y.J. Liang and Y.C. Che. Handbook of Inorganic Thermodynamic Data, Northeast University Press, Shenyang, 1993, p.151.
[34]	D.L. Ye and J.H. Hu. Thermodynamic Data Manual of Practical Inorganic Chemistry, Metallurgical Industry Press, Beijing, 2002, p.569.
[35]	R.C. John, A.D. Pelton, A.L. Young, W.T. Thompson, I.G. Wright, and T.M. Besmann, Assessing corrosion in oil refining and petrochemical processing, Mater. Res., 7(2004), No. 1, p. 163. doi: 10.1590/S1516-14392004000100022