Experimental study on thermal and mechanical properties of tailings-based cemented paste backfill with CaCl<sub>2</sub>·6H<sub>2</sub>O/expanded vermiculite shape stabilized phase change materials

Xiaoyan Zhang; Tianrun Cao; Lang Liu; Baoyun Bu; Yaping Ke; Qiangqiang Du

doi:10.1007/s12613-022-2503-7

Volume 30 Issue 2

Feb. 2023

Turn off MathJax

Article Contents

Article Navigation > International Journal of Minerals, Metallurgy and Materials > 2023 > 30(2): 250-259

Xiaoyan Zhang, Tianrun Cao, Lang Liu, Baoyun Bu, Yaping Ke, and Qiangqiang Du, Experimental study on thermal and mechanical properties of tailings-based cemented paste backfill with CaCl₂·6H₂O/expanded vermiculite shape stabilized phase change materials, Int. J. Miner. Metall. Mater., 30(2023), No. 2, pp. 250-259. https://doi.org/10.1007/s12613-022-2503-7

Cite this article as:

Xiaoyan Zhang, Tianrun Cao, Lang Liu, Baoyun Bu, Yaping Ke, and Qiangqiang Du, Experimental study on thermal and mechanical properties of tailings-based cemented paste backfill with CaCl2·6H2O/expanded vermiculite shape stabilized phase change materials, Int. J. Miner. Metall. Mater., 30(2023), No. 2, pp. 250-259. https://doi.org/10.1007/s12613-022-2503-7

Citation:

PDF( 1386 KB)

Research Article

Experimental study on thermal and mechanical properties of tailings-based cemented paste backfill with CaCl₂·6H₂O/expanded vermiculite shape stabilized phase change materials

+ Author Affiliations

Corresponding author:
Lang Liu E-mail: liulang@xust.edu.cn
Received: 29 November 2021; Revised: 15 April 2022; Accepted: 18 April 2022; Available online: 19 April 2022

Abstract

Abstract

CaCl₂·6H₂O/expanded vermiculite shape stabilized phase change materials (CEV) was prepared by atmospheric impregnation method. Using gold mine tailings as aggregate of cemented paste backfill (CPB) material, the CPB with CEV added was prepared, and the specific heat capacity, thermal conductivity, and uniaxial compressive strength (UCS) of CPB with different cement−tailing ratios and CEV addition ratios were tested, the influence of the above variables on the thermal and mechanical properties of CPB was analyzed. The results show that the maximum encapsulation capacity of expanded vermiculite for CaCl₂·6H₂O is about 60%, and the melting and solidification enthalpies of CEV can reach 98.87 J/g and 97.56 J/g, respectively. For the CPB without CEV, the specific heat capacity, thermal conductivity, and UCS decrease with the decrease of cement−tailing ratio. For the CPB with CEV added, with the increase of CEV addition ratio, the specific heat capacity increases significantly, and the sensible heat storage capacity and latent heat storage capacity can be increased by at least 10.74% and 218.97% respectively after adding 12% CEV. However, the addition of CEV leads to the increase of pores, and the thermal conductivity and UCS both decrease with the increase of CEV addition. When cement–tailing ratio is 1:8 and 6%, 9%, and 12% of CEV are added, the 28-days UCS of CPB is less than 1 MPa. Considering the heat storage capacity and cost price of backfill, the recommended proportion scheme of CPB material presents cement−tailing ratio of 1:6 and 12% CEV, and the most recommended heat storage/release temperature cycle range of CPB with added CEV is from 20 to 40°C. This work can provide theoretical basis for the utilization of heat storage backfill in green mines.
- CaCl₂·6H₂O/expanded vermiculite;
- shape stabilized phase change materials;
- cemented paste backfill;
- thermal property;
- mechanical property

FullText(HTML)

Supplements(1)

Supplementary Informations-IJM-11-2021-1128.doc

References(48)

References

[1]	H.P. Xie, F. Gao, Y. Ju, et al., Quantitative definition and investigation of deep mining, J. China Coal Soc., 40(2015), No. 1, p. 1.
[2]	H.Y. Cheng, A.X. Wu, S.C. Wu, et al., Research status and development trend of solid waste backfill in metal mines, Chin. J. Eng., 44(2022), No. 1, p. 11.
[3]	Y. Dong, X.J. Liu, and H.L. Hou, Analysis of green mine evaluation index, China Min. Mag., 29(2020), No. 12, p. 68.
[4]	L. Liu, J. Xin, B. Zhang, et al., Basic theories and applied exploration of functional backfill in mines, J. China Coal Soc., 43(2018), No. 7, p. 1811.
[5]	X.C. Hu, J. Banks, L.P. Wu, and W.V. Liu, Numerical modeling of a coaxial borehole heat exchanger to exploit geothermal energy from abandoned petroleum wells in Hinton, Alberta, Renewable Energy, 148(2020), p. 1110. doi: 10.1016/j.renene.2019.09.141
[6]	X.Y. Zhang, M. Zhao, L. Liu, et al., Numerical simulation on heat storage performance of backfill body based on tube-in-tube heat exchanger, Constr. Build. Mater., 265(2020), art. No. 120340. doi: 10.1016/j.conbuildmat.2020.120340
[7]	D.V. Voronin, E. Ivanov, P. Gushchin, R. Fakhrullin, and V. Vinokurov, Clay composites for thermal energy storage: A review, Molecules, 25(2020), No. 7, art. No. 1504. doi: 10.3390/molecules25071504
[8]	P.Z. Lv, C.Z. Liu, and Z.H. Rao, Review on clay mineral-based form-stable phase change materials: Preparation, characterization and applications, Renewable Sustainable Energy Rev., 68(2017), p. 707. doi: 10.1016/j.rser.2016.10.014
[9]	Y. Deng, J.H. Li, T.T. Qian, W.M. Guan, and X. Wang, Polyethylene glycol/expanded vermiculite shape-stabilized composite phase change materials for thermal energy storage, Mater. Sci. Forum, 847(2016), p. 39. doi: 10.4028/www.scientific.net/MSF.847.39
[10]	L.L. Fu, Q.H. Wang, R.D. Ye, X.M. Fang, and Z.G. Zhang, A calcium chloride hexahydrate/expanded perlite composite with good heat storage and insulation properties for building energy conservation, Renewable Energy, 114(2017), p. 733. doi: 10.1016/j.renene.2017.07.091
[11]	W.B. Jia, C.M. Wang, T.J. Wang, Z.Y. Cai, and K. Chen, Preparation and performances of palmitic acid/diatomite form-stable composite phase change materials, Int. J. Energy Res., 44(2020), No. 6, p. 4298. doi: 10.1002/er.5197
[12]	Y. Deng, J.H. Li, and H.E. Nian, Expanded vermiculite: A promising natural encapsulation material of LiNO₃, NaNO₃, and KNO₃ phase change materials for medium-temperature thermal energy storage, Adv. Eng. Mater., 20(2018), No. 8, art. No. 1800135. doi: 10.1002/adem.201800135
[13]	W.M. Jia, J.H. Ji, M.Y. Zhang, X.J. Zhang, H.M. Cheng, and H.M. Dong, Research and engineering application of high temperature and thermal damage prevention in deep mines, Coal Technol., 39(2020), No. 3, p. 88.
[14]	M. Wang, L. Liu, B. Zhang, et al., Basic theory of cold load and storage functional backfill in mining, J. China Coal Soc., 45(2020), No. 4, p. 1336.
[15]	Y.E. Milián, A. Gutiérrez, M. Grágeda, and S. Ushak, A review on encapsulation techniques for inorganic phase change materials and the influence on their thermophysical properties, Renewable Sustainable Energy Rev., 73(2017), p. 983. doi: 10.1016/j.rser.2017.01.159
[16]	J. Xin, L. Liu, L.H. Xu, J.Y. Wang, P. Yang, and H.S. Qu, A preliminary study of aeolian sand-cement-modified gasification slag-paste backfill: Fluidity, microstructure, and leaching risks, Sci. Total Environ., 830(2022), art. No. 154766. doi: 10.1016/j.scitotenv.2022.154766
[17]	N. Zhou, C.W. Dong, J.X. Zhang, G.H. Meng, and Q.Q. Cheng, Influences of mine water on the properties of construction and demolition waste-based cemented paste backfill, Constr. Build. Mater., 313(2021), art. No. 125492. doi: 10.1016/j.conbuildmat.2021.125492
[18]	N. Zhou, E.B. Du, J.X. Zhang, C.L. Zhu, and H.Q. Zhou, Mechanical properties improvement of sand-based cemented backfill body by adding glass fibers of different lengths and ratios, Constr. Build. Mater., 280(2021), art. No. 122408. doi: 10.1016/j.conbuildmat.2021.122408
[19]	Z.W. Du, S.J. Chen, S. Wang, R. Liu, D.H. Yao, and H.S. Mitri, Influence of binder types and temperatures on the mechanical properties and microstructure of cemented paste backfill, Adv. Civ. Eng., 2021(2021), art. No. 6652176. doi: 10.1155/2021/6652176
[20]	Y.Y. Tan, E. Davide, Y.C. Zhou, W.D. Song, and X. Meng, Long-term mechanical behavior and characteristics of cemented tailings backfill through impact loading, Int. J. Miner. Metall. Mater., 27(2020), No. 2, p. 140. doi: 10.1007/s12613-019-1878-6
[21]	Q. Zhou, J.H. Liu, A.X. Wu, and H.J. Wang, Early-age strength property improvement and stability analysis of unclassified tailing paste backfill materials, Int. J. Miner. Metall. Mater., 27(2020), No. 9, p. 1191. doi: 10.1007/s12613-020-1977-4
[22]	J. Wang, J.X. Fu, W.D. Song, Y.F. Zhang, and Y. Wang, Mechanical behavior, acoustic emission properties and damage evolution of cemented paste backfill considering structural feature, Constr. Build. Mater., 261(2020), art. No. 119958. doi: 10.1016/j.conbuildmat.2020.119958
[23]	Y.L. Shen, S.L. Liu, C. Zeng, et al., Experimental thermal study of a new PCM-concrete thermal storage block (PCM-CTSB), Constr. Build. Mater., 293(2021), art. No. 123540. doi: 10.1016/j.conbuildmat.2021.123540
[24]	M. Ren, X.D. Wen, X.J. Gao, and Y.S. Liu, Thermal and mechanical properties of ultra-high performance concrete incorporated with microencapsulated phase change material, Constr. Build. Mater., 273(2021), art. No. 121714. doi: 10.1016/j.conbuildmat.2020.121714
[25]	X. Sun, W.Y. Liao, A. Kumar, K.H. Khayat, Z.H. Tian, and H.Y. Ma, Multi-level modeling of thermal behavior of phase change material incorporated lightweight aggregate and concrete, Cem. Concr. Compos., 122(2021), art. No. 104131. doi: 10.1016/j.cemconcomp.2021.104131
[26]	A. Ilyas, M.Z. Ahad, M.A.Q.J. Durrani, and A. Naveed, Synthesis and characterization of PCM based insulated concrete for thermal energy storage, Mater. Res. Express, 8(2021), No. 7, art. No. 075503. doi: 10.1088/2053-1591/ac118a
[27]	J. Chen, W.M. Zhang, X.J. Shi, C. Yao, and C.C. Kuai, Use of PEG/SiO₂ phase change composite to control porous asphalt concrete temperature, Constr. Build. Mater., 245(2020), art. No. 118459. doi: 10.1016/j.conbuildmat.2020.118459
[28]	A.L. Brooks, Y. Fang, Z.L. Shen, J.L. Wang, and H.Y. Zhou, Enabling high-strength cement-based materials for thermal energy storage via fly-ash cenosphere encapsulated phase change materials, Cem. Concr. Compos., 120(2021), art. No. 104033. doi: 10.1016/j.cemconcomp.2021.104033
[29]	E. Mohseni, W. Tang, K.H. Khayat, and H.Z. Cui, Thermal performance and corrosion resistance of structural-functional concrete made with inorganic PCM, Constr. Build. Mater., 249(2020), art. No. 118768. doi: 10.1016/j.conbuildmat.2020.118768
[30]	L. Zhu, F.N. Dang, Y. Xue, K. Jiao, and W.H. Ding, Multivariate analysis of effects of microencapsulated phase change materials on mechanical behaviors in light-weight aggregate concrete, J. Build. Eng., 42(2021), art. No. 102783. doi: 10.1016/j.jobe.2021.102783
[31]	X.Y. Zhang, M.Y. Xu, L. Liu, et al., Experimental study on thermal and mechanical properties of cemented paste backfill with phase change material, J. Mater. Res. Technol., 9(2020), No. 2, p. 2164. doi: 10.1016/j.jmrt.2019.12.047
[32]	X.G. Zhang, J.X. Qiao, W.Y. Zhang, et al., Thermal behavior of composite phase change materials based on polyethylene glycol and expanded vermiculite with modified porous carbon layer, J. Mater. Sci., 53(2018), No. 18, p. 13067. doi: 10.1007/s10853-018-2531-x
[33]	B.W. Xu, H.Y. Ma, Z.Y. Lu, and Z.J. Li, Paraffin/expanded vermiculite composite phase change material as aggregate for developing lightweight thermal energy storage cement-based composites, Appl. Energy, 160(2015), p. 358. doi: 10.1016/j.apenergy.2015.09.069
[34]	C. Chen, H.S. Ling, N. Yu, N. Li, M.X. Zhang, and Y. Li, Calculation method of heat storage coefficient of phase change material, Acta Energiae Solaris Sin., 39(2018), No. 8, p. 2267.
[35]	L. Liu, P. Yang, C.C. Qi, B. Zhang, L.J. Guo, and K.I. Song, An experimental study on the early-age hydration kinetics of cemented paste backfill, Constr. Build. Mater., 212(2019), p. 283. doi: 10.1016/j.conbuildmat.2019.03.322
[36]	H.W. Min, S. Kim, and H.S. Kim, Investigation on thermal and mechanical characteristics of concrete mixed with shape stabilized phase change material for mix design, Constr. Build. Mater., 149(2017), p. 749. doi: 10.1016/j.conbuildmat.2017.05.176
[37]	X. Liu, J.H. Wu, T. Xian, and Y. Feng, Preparation and properties of CaCl₂·6H₂O/expanded graphite composite phase change materials, J. Zhejiang Univ. (Eng. Sci.), 53(2019), No. 7, p. 1291.
[38]	A.B. Jin, Y. Ju, H. Sun, et al., Strength and thermal performance of phase change energy storage backfill, J. Harbin Inst. Technol., 54(2022), No. 2, p. 81.
[39]	X.M. Zhang, T. Zhu, Q.S. An, Z.P. Ren, and F.M. Mei, Heat Transfer, 6th ed., China Architecture & Building Press, Beijing, 2014, p. 13.
[40]	H. Yang, W.H. Chen, X.F. Kong, and X. Rong, Fabrication, property characterization and thermal performance of composite phase change material plates based on tetradecanol-myristic acid binary eutectic mixture/expanded perlite and expanded vermiculite for building application, J. Cent. South Univ., 26(2019), No. 9, p. 2578. doi: 10.1007/s11771-019-4196-2
[41]	S.G. Jeong, S.J. Chang, S. Wi, et al., Energy efficient concrete with n-octadecane/xGnP SSPCM for energy conservation in infrastructure, Constr. Build. Mater., 106(2016), p. 543. doi: 10.1016/j.conbuildmat.2015.12.114
[42]	N. Li, S.W. Lv, W. Wang, J. Guo, P. Jiang, and Y. Liu, Experimental investigations on the mechanical behavior of iron tailings powder with compound admixture of cement and nano-clay, Constr. Build. Mater., 254(2020), art. No. 119259. doi: 10.1016/j.conbuildmat.2020.119259
[43]	L. Cui and M. Fall, Mechanical and thermal properties of cemented tailings materials at early ages: Influence of initial temperature, curing stress and drainage conditions, Constr. Build. Mater., 125(2016), p. 553. doi: 10.1016/j.conbuildmat.2016.08.080
[44]	W.X. Wu, W. Wu, and S.F. Wang, Form-stable and thermally induced flexible composite phase change material for thermal energy storage and thermal management applications, Appl. Energy, 236(2019), p. 10. doi: 10.1016/j.apenergy.2018.11.071
[45]	A. Adesina, P.O. Awoyera, A. Sivakrishna, K.R. Kumar, and R. Gobinath, Phase change materials in concrete: An overview of properties, Mater. Today Proc., 27(2020), p. 391. doi: 10.1016/j.matpr.2019.11.228
[46]	Y. Yang, A.H. Wu, and L.H. Yang, Experimental study on the properties of unclassified tailing paste, Metal Mine, 45(2016), No. 8, p. 185.
[47]	S.H. Yin, A.X. Wu, K.J. Hu, Y. Wang, and Y.K. Zhang, The effect of solid components on the rheological and mechanical properties of cemented paste backfill, Miner. Eng., 35(2012), p. 61. doi: 10.1016/j.mineng.2012.04.008
[48]	B. Zhang, P.Y. Xue, L. Liu, et al., Exploration on the method of ore deposit–geothermal energy synergetic mining in deep backfill mines, J. China Coal Soc., 46(2021), No. 9, p. 2824.