Cite this article as: |
Heng Zheng, Oday Daghagheleh, Thomas Wolfinger, Bernd Taferner, Johannes Schenk, and Runsheng Xu, Fluidization behavior and reduction kinetics of pre-oxidized magnetite-based iron ore in a hydrogen-induced fluidized bed, Int. J. Miner. Metall. Mater., 29(2022), No. 10, pp. 1873-1881. https://doi.org/10.1007/s12613-022-2511-7 |
Heng Zheng E-mail: heng.zheng@stud.unileoben.ac.at
The influence of different pre-oxidation temperatures and pre-oxidation degrees on the reduction and fluidization behaviors of magnetite-based iron ore was investigated in a hydrogen-induced fluidized bed. The raw magnetite-based iron ore was pre-oxidized at 800 and 1000°C for a certain time to reach a partly oxidation and deeply oxidation state. The structure and morphology of the reduced particles were analyzed via optical microscope and scanning electron microscopy (SEM). The reaction kinetic mechanism was determined based on the double-logarithm analysis. The results indicate that the materials with higher oxidation temperature and wider particle size range show better fluidization behaviors. The lower oxidation temperature is more beneficial for the reduction rate, especially in the later reduction stage. The pre-oxidation degree shows no obvious influence on the fluidization and reduction behaviors. Based on the kinetic analysis, the reduction progress can be divided into three stages. The reduction mechanism was discussed combing the surface morphology and phase structure.
[1] |
European Commission, Climate Action - 2050 Long-term Strategy [2021-11-13]. https://ec.europa.eu/clima/policies/strategies/2050_en
|
[2] |
Worldsteel, Steel Statistical Yearbooks [2021-11-14]. https://www.worldsteel.org/steel-by-topic/statistics/steel-statistical-yearbook.html
|
[3] |
Roland Berger, The Future of Steelmaking–How the European Steel Industry can Achieve Carbon Neutrality, Roland Berger GMBH, Munich, 2020.
|
[4] |
European Commission, Ultra-Low CO2 Steelmaking [2021-11-14]. https://cordis.europa.eu/project/id/515960
|
[5] |
M.A. Quader, S. Ahmed, S.Z. Dawal, and Y. Nukman, Present needs, recent progress and future trends of energy-efficient Ultra-Low Carbon Dioxide (CO2) Steelmaking (ULCOS) program, Renewable Sustainable Energy Rev., 55(2016), p. 537. doi: 10.1016/j.rser.2015.10.101
|
[6] |
A. Bhaskar, M. Assadi, and H.N. Somehsaraei, Decarbonization of the iron and steel industry with direct reduction of iron ore with green hydrogen, Energies, 13(2020), No. 3, art. No. 758. doi: 10.3390/en13030758
|
[7] |
Y.B. Chen and H.B. Zuo, Review of hydrogen-rich ironmaking technology in blast furnace, Ironmaking Steelmaking, 48(2021), No. 6, p. 749. doi: 10.1080/03019233.2021.1909992
|
[8] |
W.G. Liu, H.B. Zuo, J.S. Wang, Q.G. Xue, B.L. Ren, and F. Yang, The production and application of hydrogen in steel industry, Int. J. Hydrogen Energy, 46(2021), No. 17, p. 10548. doi: 10.1016/j.ijhydene.2020.12.123
|
[9] |
F. Patisson and O. Mirgaux, Hydrogen ironmaking: How it works, Metals, 10(2020), No. 7, art. No. 922. doi: 10.3390/met10070922
|
[10] |
Primetals, Enhanced Energy Efficient Steel Production – E³-SteP, Primetals Technologies, 2019 [2021-11-14]. https://nachhaltigwirtschaften.at/resources/nw_pdf/events/20191009_highlights/spreitzer-rein-eisl_e3-step.pdf
|
[11] |
J. Tang, M.S. Chu, F. Li, C. Feng, Z.G. Liu, and Y.S. Zhou, Development and progress on hydrogen metallurgy, Int. J. Miner. Metall. Mater., 27(2020), No. 6, p. 713. doi: 10.1007/s12613-020-2021-4
|
[12] |
Bellona Europa, Hydrogen in Steel Production: What is Happening in Europe – Part Two, Bellona, 2021 [2021-11-14]. https://bellona.org/news/industrial-pollution/2021-05-hydrogen-in-steel-production-what-is-happening-in-europe-part-two
|
[13] |
Hybrit, Fossil-free Steel – A Joint Opportunity! [2021-11-14]. https://www.hybritdevelopment.se/en/
|
[14] |
SALCOS®, Our Program SALCOS [2021-11-14]. https://salcos.salzgitter-ag.com/en/
|
[15] |
Voestalpine, H2FUTURE [2021-11-14]. https://www.voestalpine.com/greentecsteel/en/breakthrough-technologies/
|
[16] |
J.L. Schenk, Recent status of fluidized bed technologies for producing iron input materials for steelmaking, Particuology, 9(2011), No. 1, p. 14. doi: 10.1016/j.partic.2010.08.011
|
[17] |
S. Daniel, Development of Characterization Methods for the Evalution of Kinetic Behavior and the Fluidization of Iron Ore Fines during Hydrogen-induced Fluidized Bed Reduction [Dissertation], Montanuniversitaet Leoben, Leoben, 2000.
|
[18] |
D. Spreitzer and J. Schenk, Iron ore reduction by hydrogen using a laboratory scale fluidized bed reactor: Kinetic investigation—Experimental setup and method for determination, Metall. Mater. Trans. B, 50(2019), No. 5, p. 2471. doi: 10.1007/s11663-019-01650-9
|
[19] |
D. Spreitzer and J. Schenk, Fluidization behavior and reducibility of iron ore fines during hydrogen-induced fluidized bed reduction, Particuology, 52(2020), p. 36. doi: 10.1016/j.partic.2019.11.006
|
[20] |
H. Zheng, D. Spreitzer, T. Wolfinger, J. Schenk, and R.S. Xu, Effect of prior oxidation on the reduction behavior of magnetite-based iron ore during hydrogen-induced fluidized bed reduction, Metall. Mater. Trans. B, 52(2021), No. 4, p. 1955. doi: 10.1007/s11663-021-02215-5
|
[21] |
T. Wolfinger, D. Spreitzer, H. Zheng, and J. Schenk, Influence of a prior oxidation on the reduction behavior of magnetite iron ore ultra-fines using hydrogen, Metall. Mater. Trans. B, 53(2022), No. 1, p. 14. doi: 10.1007/s11663-021-02378-1
|
[22] |
E. Park and O. Ostrovski, Reduction of titania-ferrous ore by hydrogen, ISIJ Int., 44(2004), No. 6, p. 999. doi: 10.2355/isijinternational.44.999
|
[23] |
Z.Y. Wang, J.L. Zhang, K.X. Jiao, Z.J. Liu, and M. Barati, Effect of pre-oxidation on the kinetics of reduction of ironsand, J. Alloys Compd., 729(2017), p. 874. doi: 10.1016/j.jallcom.2017.08.293
|
[24] |
D.Q. Zhu, C.C. Yang, J. Pan, and X.B. Li, Comparison of the oxidation behaviors of high FeO chromite and magnetite concentrates relevant to the induration of ferrous pellets, Metall. Mater. Trans. B, 47(2016), No. 5, p. 2919. doi: 10.1007/s11663-016-0770-2
|
[25] |
F. Pan, Q.S. Zhu, Z. Du, and H.Y. Sun, Oxidation kinetics, structural changes and element migration during oxidation process of vanadium-titanium magnetite ore, J. Iron Steel Res. Int., 23(2016), No. 11, p. 1160. doi: 10.1016/S1006-706X(16)30171-6
|
[26] |
Q.Y. Xu, Z.Z. Liu, Z.P. Li, J.J. Wang, and L. Zhou, The effect of carbon dissection of waste plastics on inhibiting the adhesion of fine iron ore particles during hydrogen reduction, Metals, 8(2018), No. 7, art. No. 523. doi: 10.3390/met8070523
|
[27] |
Q.Y. Xu, Z.P. Li, Z.Z. Liu, J.J. Wang, and H.C. Wang, The effect of pressurized decarbonization of CO on inhibiting the adhesion of fine iron ore particles, Metals, 8(2018), No. 7, art. No. 525. doi: 10.3390/met8070525
|
[28] |
M.I.A. Barustan and S.M. Jung, Morphology of iron and agglomeration behaviour during reduction of iron oxide fines, Met. Mater. Int., 25(2019), No. 4, p. 1083. doi: 10.1007/s12540-019-00259-6
|
[29] |
H. Zheng, J. Schenk, D. Spreitzer, T. Wolfinger, and O. Daghagheleh, Review on the oxidation behaviors and kinetics of magnetite in particle scale, Steel Res. Int., 92(2021), No. 8, art. No. 2000687. doi: 10.1002/srin.202000687
|
[30] |
J.D. Hancock and J.H. Sharp, Method of comparing solid-state kinetic data and its application to the decomposition of kaolinite, brucite, and BaCO3, J. Am. Ceram. Soc., 55(1972), No. 2, p. 74. doi: 10.1111/j.1151-2916.1972.tb11213.x
|
[31] |
E.R. Monazam, R.W. Breault, and R. Siriwardane, Reduction of hematite (Fe2O3) to wüstite (FeO) by carbon monoxide (CO) for chemical looping combustion, Chem. Eng. J., 242(2014), p. 204. doi: 10.1016/j.cej.2013.12.040
|
[32] |
E.R. Monazam, R.W. Breault, R. Siriwardane, G. Richards, and S. Carpenter, Kinetics of the reduction of hematite (Fe2O3) by methane (CH4) during chemical looping combustion: A global mechanism, Chem. Eng. J., 232(2013), p. 478. doi: 10.1016/j.cej.2013.07.091
|
[33] |
H.S. Chen, Z. Zheng, Z.W. Chen, and X.T. Bi, Reduction of hematite (Fe2O3) to metallic iron (Fe) by CO in a micro fluidized bed reaction analyzer: A multistep kinetics study, Powder Technol., 316(2017), p. 410. doi: 10.1016/j.powtec.2017.02.067
|
[34] |
H.S. Chen, Z. Zheng, Z.W. Chen, W.Z. Yu, and J.R. Yue, Multistep reduction kinetics of fine iron ore with carbon monoxide in a micro fluidized bed reaction analyzer, Metall. Mater. Trans. B, 48(2017), No. 2, p. 841. doi: 10.1007/s11663-016-0883-7
|
[35] |
K. He, Z. Zheng, Z.W. Chen, H.S. Chen, and W.P. Hao, Kinetics of hydrogen reduction of Brazilian hematite in a micro-fluidized bed, Int. J. Hydrogen Energy, 46(2021), No. 5, p. 4592. doi: 10.1016/j.ijhydene.2020.10.263
|
[36] |
K. He, Z. Zheng, and Z.W. Chen, Multistep reduction kinetics of Fe3O4 to Fe with CO in a micro fluidized bed reaction analyzer, Powder Technol., 360(2020), p. 1227. doi: 10.1016/j.powtec.2019.10.094
|
[37] |
R. Nicolle and A. Rist, The mechanism of whisker growth in the reduction of wüstite, Metall. Trans. B, 10(1979), No. 3, p. 429. doi: 10.1007/BF02652516
|