Strength and ductility synergy of Nb-alloyed Ni<sub>0.6</sub>CoFe<sub>1.4</sub> alloys

Jian Wu; Heguo Zhu; Zonghan Xie

doi:10.1007/s12613-022-2567-4

Volume 30 Issue 4

Apr. 2023

Turn off MathJax

Article Contents

Article Navigation > International Journal of Minerals, Metallurgy and Materials > 2023 > 30(4): 707-714

Jian Wu, Heguo Zhu, and Zonghan Xie, Strength and ductility synergy of Nb-alloyed Ni_0.6CoFe_1.4 alloys, Int. J. Miner. Metall. Mater., 30(2023), No. 4, pp. 707-714. https://doi.org/10.1007/s12613-022-2567-4

Cite this article as:

Jian Wu, Heguo Zhu, and Zonghan Xie, Strength and ductility synergy of Nb-alloyed Ni0.6CoFe1.4 alloys, Int. J. Miner. Metall. Mater., 30(2023), No. 4, pp. 707-714. https://doi.org/10.1007/s12613-022-2567-4

Citation:

PDF( 4053 KB)

Research Article

Strength and ductility synergy of Nb-alloyed Ni_0.6CoFe_1.4 alloys

+ Author Affiliations

Corresponding author:
Heguo Zhu E-mail: zhg1200@njust.edu.cn
Received: 20 August 2022; Revised: 13 October 2022; Accepted: 25 October 2022; Available online: 26 October 2022

Abstract

Abstract

Designing strong, yet ductile, and body-centered cubic (BCC) medium-entropy alloys (MEAs) remains to be a challenge nowadays. In this study, the strength–ductility trade-off of Ni_0.6CoFe_1.4 MEAs was tackled via introducing a BCC + face-centered cubic (FCC) dual-phase microstructure. Ni_0.6CoFe_1.4Nb_x (x = 0, 0.05, 0.08, 0.10, and 0.15, in molar ratio) MEAs were prepared using vacuum induction melting. Results show that the new alloy is composed of BCC plus FCC dual phases featuring a network-like structure, and the BCC phase is the main phase in this alloy system. Moreover, the Nb0.10 MEA shows high strength and respectable tensile ductility, representing the best combination of the strength and fracture elongation among the alloys studied here. The remarkable strength of the Nb0.10 MEA is attributed to the combined effect of the solid solution strengthening, the precipitation hardening effect and the interface strengthening effect.
- medium-entropy alloys;
- alloying;
- microstructure;
- mechanical properties;
- strengthening

FullText(HTML)

Supplements(0)

References(38)

References

[1]	Z. Shojaei, G.R. Khayati, and E. Darezereshki, Review of electrodeposition methods for the preparation of high-entropy alloys, Int. J. Miner. Metall. Mater., 29(2022), No. 9, p. 1683. doi: 10.1007/s12613-022-2439-y
[2]	E.P. George, D. Raabe, and R.O. Ritchie, High-entropy alloys, Nat. Rev. Mater., 4(2019), No. 8, p. 515. doi: 10.1038/s41578-019-0121-4
[3]	C.Y. Cheng, Y.C. Yang, Y.Z. Zhong, Y.Y. Chen, T. Hsu, and J.W.Yeh, Physical metallurgy of concentrated solid solutions from low-entropy to high-entropy alloys, Curr. Opin. Solid State Mater. Sci., 21(2017), No. 6, p. 299. doi: 10.1016/j.cossms.2017.09.002
[4]	W. Jiang, Y.T. Zhu, and Y.H. Zhao, Mechanical properties and deformation mechanisms of heterostructured high-entropy and medium-entropy alloys: A review, Front. Mater, 8(2022), p. 792359. doi: 10.3389/fmats.2021.792359
[5]	N.D. Stepanov, D.G. Shaysultanov, G.A. Salishchev, and M.A.Tikhonovsky, Structure and mechanical properties of a light-weight AlNbTiV high entropy alloy, Mater. Lett., 142(2015), p. 153. doi: 10.1016/j.matlet.2014.11.162
[6]	O.N. Senkov, G.B. Wilks, D.B. Miracle, C.P. Chuang, and P.K.Liaw, Refractory high-entropy alloys, Intermetallics, 18(2010), No. 9, p. 1758. doi: 10.1016/j.intermet.2010.05.014
[7]	B. Gorr, M. Azim, H.J. Christ, T. Mueller, D. Schliephake, and M.Heilmaier, Phase equilibria, microstructure, and high temperature oxidation resistance of novel refractory high-entropy alloys, J. Alloys Compd., 624(2015), p. 270. doi: 10.1016/j.jallcom.2014.11.012
[8]	F. He, D. Chen, B. Han, et al., Design of D0₂₂ superlattice with superior strengthening effect in high entropy alloys, Acta Mater., 167(2019), p. 275. doi: 10.1016/j.actamat.2019.01.048
[9]	W.P. Li, T.H. Chou, T. Yang, et al., Design of ultrastrong but ductile medium-entropy alloy with controlled precipitations and heterogeneous grain structures, Appl. Mater. Today, 23(2021), art. No. 101037. doi: 10.1016/j.apmt.2021.101037
[10]	T. Xiang, Z.Y. Cai, P. Du, K. Li, Z.W. Zhang, and G.Q. Xie, Dual phase equal-atomic NbTaTiZr high-entropy alloy with ultra-fine grain and excellent mechanical properties fabricated by spark plasma sintering, J. Mater. Sci. Technol., 90(2021), p. 150. doi: 10.1016/j.jmst.2021.03.024
[11]	K.R. Lim, H.J. Kwon, J.H. Kang, J.W. Won, and Y.S. Na, A novel ultra-high-strength duplex Al–Co–Cr–Fe–Ni high-entropy alloy reinforced with body-centered-cubic ordered-phase particles, Mater. Sci. Eng. A, 771(2020), art. No. 138638. doi: 10.1016/j.msea.2019.138638
[12]	Y. Ji, L. Zhang, X. Lu, et al., Microstructural optimization of Fe_xCrNiAl_0.5Ti_0.5 high entropy alloys toward high ductility, Appl. Phys. Lett., 119(2021), No. 14, art. No. 141903. doi: 10.1063/5.0060678
[13]	A. Fu, B. Liu, S.H. Xu, et al., Mechanical properties and microstructural evolution of a novel (FeCoNi)_86.93Al_6.17Ti_6.9 medium entropy alloy fabricated via powder metallurgy technique, J. Alloys Compd., 860(2021), art. No. 158460. doi: 10.1016/j.jallcom.2020.158460
[14]	N. Malatji, A.P.I. Popoola, T. Lengopeng, and S. Pityana, Effect of Nb addition on the microstructural, mechanical and electrochemical characteristics of AlCrFeNiCu high-entropy alloy, Int. J. Miner. Metall. Mater., 27(2020), No. 10, p. 1332. doi: 10.1007/s12613-020-2178-x
[15]	H. Liang, H.W. Yao, D.X. Qiao, et al., Microstructures and wear resistance of AlCrFeNi₂W_0.2Nb_x high-entropy alloy coatings prepared by laser cladding, J. Therm. Spray Tech., 28(2019), No. 6, p. 1318. doi: 10.1007/s11666-019-00901-0
[16]	R. Li, J. Ren, G.J. Zhang, et al., Novel (CoFe₂NiV_0.5Mo_0.2)_100−xNb_x eutectic high-entropy alloys with excellent combination of mechanical and corrosion properties, Acta Metall. Sin. Engl. Lett., 33(2020), No. 8, p. 1046. doi: 10.1007/s40195-020-01072-6
[17]	W.H. Liu, J.Y. He, H.L. Huang, H. Wang, Z.P. Lu, and C.T. Liu, Effects of Nb additions on the microstructure and mechanical property of CoCrFeNi high-entropy alloys, Intermetallics, 60(2015), p. 1. doi: 10.1016/j.intermet.2015.01.004
[18]	D.Y. Lin, N.N. Zhang, B. He, et al., Structural evolution and performance changes in FeCoCrNiAlNb_x high-entropy alloy coatings cladded by laser_, J. Therm. Spray Technol., 26(2017), No. 8, p. 2005.
[19]	Q.Q. Wei, X.D. Xu, G.M. Li, et al., A carbide-reinforced Re_0.5MoNbW(TaC)_0.8 eutectic high-entropy composite with outstanding compressive properties, Scripta Mater., 200(2021), art. No. 113909. doi: 10.1016/j.scriptamat.2021.113909
[20]	B.L. Bramfitt, The effect of carbide and nitride additions on the heterogeneous nucleation behavior of liquid iron, Metall. Trans., 1(1970), No. 7, p. 1987. doi: 10.1007/BF02642799
[21]	K.X. Zhou, J.J. Li, L.L. Wang, H.O. Yang, Z.J. Wang, and J.C. Wang, Direct laser deposited bulk CoCrFeNiNb_x high entropy alloys, Intermetallics, 114(2019), art. No. 106592. doi: 10.1016/j.intermet.2019.106592
[22]	P.P. Li, A.D. Wang, and C.T. Liu, Composition dependence of structure, physical and mechanical properties of FeCoNi(MnAl)_x high entropy alloys, Intermetallics, 87(2017), p. 21. doi: 10.1016/j.intermet.2017.04.007
[23]	Y.H. Guo, M.Y. Li, P. Li, et al., Microstructure and mechanical properties of oxide dispersion strengthened FeCoNi concentrated solid solution alloys, J. Alloys Compd., 820(2020), art. No. 153104. doi: 10.1016/j.jallcom.2019.153104
[24]	H. Wu, S.R. Huang, S.M. Zhao, et al., Microstructures and mechanical properties of in-situ FeCrNiCu high entropy alloy matrix composites reinforced with NbC particles, Intermetallics, 127(2020), art. No. 106983. doi: 10.1016/j.intermet.2020.106983
[25]	J.F. Zhang, T. Jia, H. Qiu, H.G. Zhu, and Z.H. Xie, Effect of cooling rate upon the microstructure and mechanical properties of in situ TiC reinforced high entropy alloy CoCrFeNi, J. Mater. Sci. Technol., 42(2020), p. 122. doi: 10.1016/j.jmst.2019.12.002
[26]	Y.C. Zhang, Y.R. Yang, J.F. Zhang, J.W. Li, H.G. Zhu, and Z.H. Xie, Effect of Ti and B additions on the microstructure and properties of FeCoCrNi high entropy alloys prepared by hot pressing, Powder Metall., 65(2022), No. 4, p. 347. doi: 10.1080/00325899.2022.2029302
[27]	J.W. Yeh, S.K. Chen, S.J. Lin, et al., Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes, Adv. Eng. Mater., 6(2004), No. 5, p. 299. doi: 10.1002/adem.200300567
[28]	Y. Zhang, Y.J. Zhou, J.P. Lin, G.L. Chen, and P.K. Liaw, Solid-solution phase formation rules for multi-component alloys, Adv. Eng. Mater., 10(2008), No. 6, p. 534. doi: 10.1002/adem.200700240
[29]	S. Guo, C. Ng, J. Lu, and C.T. Liu, Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys, J. Appl. Phys., 109(2011), No. 10, art. No. 103505. doi: 10.1063/1.3587228
[30]	W.H. Liu, Y. Wu, J.Y. He, Y. Zhang, C.T. Liu, and Z.P. Lu, The phase competition and stability of high-entropy alloys, JOM, 66(2014), No. 10, p. 1973. doi: 10.1007/s11837-014-1119-4
[31]	S.H. Kuang, F. Zhou, W.C. Liu, and Q.B. Liu, Al₂O₃/MC particles reinforced MoFeCrTiWNb_x high-entropy-alloy coatings prepared by laser cladding, Surf. Eng., 38(2022), No. 2, p. 158. doi: 10.1080/02670844.2022.2067730
[32]	B. Chanda and J. Das, Composition dependence on the evolution of nanoeutectic in CoCrFeNiNb_x (0.45≤x≤0.65) high entropy alloys, Adv. Eng. Mater., 20(2018), No. 4, art. No. 1700908. doi: 10.1002/adem.201700908
[33]	A. Takeuchi and A. Inoue, Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element, Mater. Trans., 46(2005), No. 12, p. 2817. doi: 10.2320/matertrans.46.2817
[34]	Q.X. Nie, H. Liang, D.X. Qiao, Z.X. Qi, and Z.Q. Cao, Microstructures and mechanical properties of multi-componentAl_xCrFe₂Ni₂Mo_0.2 high-entropy alloys, Acta Metall. Sin. Engl. Lett., 33(2020), No. 8, p. 1135. doi: 10.1007/s40195-020-01085-1
[35]	M. Zhang, J.X. Hou, H.J. Yang, et al., Tensile strength prediction of dual-phase Al_0.6CoCrFeNi high-entropy alloys, Int. J. Miner. Metall. Mater., 27(2020), No. 10, p. 1341. doi: 10.1007/s12613-020-2084-2
[36]	R. Fan, L.P. Wang, L.L. Zha, et al., Synergistic effect of Nb and Mo alloying on the microstructure and mechanical properties of CoCrFeNi high entropy alloy, Mater. Sci. Eng. A, 829(2022), art. No. 142153. doi: 10.1016/j.msea.2021.142153
[37]	Y. Dong, X.X. Gao, Y.P. Lu, T.M. Wang, and T.J. Li, A multi-component AlCrFe₂Ni₂ alloy with excellent mechanical properties, Mater. Lett., 169(2016), p. 62. doi: 10.1016/j.matlet.2016.01.096
[38]	J.M. Zhu, H.M. Fu, H.F. Zhang, A.M. Wang, H. Li, and Z.Q.Hu, Microstructures and compressive properties of multicomponent AlCoCrFeNiMo_x alloys, Mater. Sci. Eng. A, 527(2010), No. 26, p. 6975. doi: 10.1016/j.msea.2010.07.028