Effect of NiO–NiCr<sub>2</sub>O<sub>4</sub> nano-oxides on the microstructural, mechanical and corrosion properties of Ni-coated carbon steel

Saeed Mojallal; Hurieh Mohammadzadeh; Abbas Aghaeinejad-Meybodi; Robabeh Jafari

doi:10.1007/s12613-022-2584-3

Volume 30 Issue 6

Jun. 2023

Turn off MathJax

Article Contents

Article Navigation > International Journal of Minerals, Metallurgy and Materials > 2023 > 30(6): 1078-1092

Saeed Mojallal, Hurieh Mohammadzadeh, Abbas Aghaeinejad-Meybodi, and Robabeh Jafari, Effect of NiO–NiCr₂O₄ nano-oxides on the microstructural, mechanical and corrosion properties of Ni-coated carbon steel, Int. J. Miner. Metall. Mater., 30(2023), No. 6, pp. 1078-1092. https://doi.org/10.1007/s12613-022-2584-3

Cite this article as:

Saeed Mojallal, Hurieh Mohammadzadeh, Abbas Aghaeinejad-Meybodi, and Robabeh Jafari, Effect of NiO–NiCr2O4 nano-oxides on the microstructural, mechanical and corrosion properties of Ni-coated carbon steel, Int. J. Miner. Metall. Mater., 30(2023), No. 6, pp. 1078-1092. https://doi.org/10.1007/s12613-022-2584-3

Citation:

PDF( 10850 KB)

Research Article

Effect of NiO–NiCr₂O₄ nano-oxides on the microstructural, mechanical and corrosion properties of Ni-coated carbon steel

+ Author Affiliations

Corresponding author:
Hurieh Mohammadzadeh E-mail: h.mohamadzadeh@urmia.ac.ir
Received: 21 September 2022; Revised: 5 December 2022; Accepted: 6 December 2022; Available online: 7 December 2022

Abstract

Abstract

Pure Ni and its composites with different percentages of Ni–Cr nano-oxides were coated over carbon steel to assess the coating features and mechanical and corrosion behavior. A nano-oxide composite of Ni–Cr was first synthesized through chemical coprecipitation with uniform distribution constituents. Electrodeposition was employed to coat pure Ni and Ni–(Ni–Cr) oxides (10, 20, 30, 40, and 50 g/L) on the steel sheets. Transmission electron microscope and field emission scanning electron microscope were adopted to examine the microstructure of powders and coatings, and X-ray diffraction analysis was employed to study the chemical composition. The microhardness, thickness, and wear resistance of the coatings were assessed, polarization and electrochemical impedance spectroscopy (EIS) tests were conducted to analyze the corrosion behavior, and the corresponding equivalent circuit was developed. Results showed flawless and crack-free coatings for all samples and uniform distribution of nano-oxides in the Ni matrix for the samples of 10–30 g/L. Agglomerated oxides were detected at high concentrations. Maximum microhardness (HV 661), thickness (116 µm), and wear resistance of coatings were found at 30 g/L. A three-loop equivalent circuit corresponded satisfactorily to all EIS data. The corrosion resistance increased with the nano-oxide concentration of up to 30 g/L but decreased at 40 g/L. The sample of 50 g/L showed the best corrosion resistance.
- nanocomposite powder;
- electroplating coating;
- corrosion resistance;
- electrochemical impedance spectroscopy;
- wear resistance

FullText(HTML)

Supplements(1)

Supplementary Information-s12613-022-2584-3.docx

References(63)

References

[1]	W.L. Wu, R.F. Chen, Z.R. Yang, Z.Y. He, Y. Zhou, and F.Z. Lv, Corrosion resistance of 45 carbon steel enhanced by laser graphene-based coating, Diam. Relat. Mater., 116(2021), art. No. 108370. doi: 10.1016/j.diamond.2021.108370
[2]	A.Y. Ivannikov, V.I. Kalita, D.I. Komlev, et al., Investigation into improving microstructure and properties of plasma sprayed Ni coating via electromechanical treatment, J. Mater. Process. Technol., 266(2019), p. 442. doi: 10.1016/j.jmatprotec.2018.11.027
[3]	M. Aghili, M.K. Yazdi, Z. Ranjbar, and S.H. Jafari, Anticorrosion performance of electro-deposited epoxy/amine functionalized graphene oxide nanocomposite coatings, Corros. Sci., 179(2021), art. No. 109143. doi: 10.1016/j.corsci.2020.109143
[4]	L.H. Guo, Q. Huang, C. Zhang, et al., Study on the formation of Mn–P coatings with significant corrosion resistance on Q235 carbon steels by adjusting the ratio of phosphorus to manganese, Corros. Sci., 178(2021), art. No. 108960. doi: 10.1016/j.corsci.2020.108960
[5]	J.C. Pereira, L.P.M. dos Santos, A.A.C. Alcanfor, et al., Effects of electrodeposition parameters on corrosion resistance of ZnSn coatings on carbon steel obtained from eutectic mixture based on choline chloride and ethylene glycol, J. Alloys Compd., 886(2021), art. No. 161159. doi: 10.1016/j.jallcom.2021.161159
[6]	A.M.K. Kirubaharan and P. Kuppusami, Corrosion behavior of ceramic nanocomposite coatings at nanoscale, [in] S. Rajendran, T.A. Nguyen, S. Kakooei, M. Yeganeh, and Y.X. Li, eds., Corrosion Protection at the Nanoscale, Elsevier, Amsterdam, 2020, p. 295.
[7]	A. Bigos, M. Janusz-Skuza, M.J. Szczerba, et al., The effect of heat treatment on the microstructural changes in electrodeposited Ni–Mo coatings, J. Mater. Process. Technol., 276(2020), art. No. 116397. doi: 10.1016/j.jmatprotec.2019.116397
[8]	P. Kar, Anticorrosion and antiwear, [in] P.N. Tri, S. Rtimi, and C.M.O. Plamondon, eds., Nanomaterials-Based Coatings – Fundamentals and Applications, Elsevier, Amsterdam, 2019, p. 195.
[9]	N.B. Singh and S. Agarwal, Nanocomposites: An overview, Emerg. Mater. Res., 5(2016), No. 1, p. 5.
[10]	M. Boroujerdnia, H. Ghayour, A. Monshi, R. Ebrahimi-Kahrizsangi, and F. Jamali-Sheini, Electroplating of Ni/Co–pumice multilayer nanocomposite coatings: Effect of current density on crystal texture transformations and corrosion behavior, Int. J. Miner. Metall. Mater., 26(2019), No. 10, p. 1299. doi: 10.1007/s12613-019-1833-6
[11]	H. Caliskan, P. Panjan, and C. Kurbanoglu, 3.16 hard coatings on cutting tools and surface finish, [in] M. Hashmi, ed., Comprehensive Materials Finishing, Elsevier, Amsterdam, 2017, p. 230.
[12]	J. Li, O.C. Lin, C. Cheng, W.B. Wang, C.Y. Xu, and L.Q. Ren, Fabrication of a Ni/SiC composite coating on steel surface with excellent corrosion inhibition performance, J. Mater. Process. Technol., 290(2021), art. No. 116987. doi: 10.1016/j.jmatprotec.2020.116987
[13]	R.A. Hussain and I. Hussain, Fabrication and applications of nickel selenide, J. Solid State Chem., 277(2019), p. 316. doi: 10.1016/j.jssc.2019.06.015
[14]	K.J. Joshi and N.M. Shah, Study of hydroxyapatite nano-particles synthesized using sono-chemical supported hydrothermal method, Mater. Today Proc., 47(2021), p. 505. doi: 10.1016/j.matpr.2020.09.587
[15]	M. Messaoud, F. Trabelsi, P. Kumari, A. Merenda, and L.F. Dumée, Recrystallization and coalescence kinetics of TiO₂ and ZnO nano-catalysts towards enhanced photocatalytic activity and colloidal stability within slurry reactors, Mater. Chem. Phys., 252(2020), art. No. 123235. doi: 10.1016/j.matchemphys.2020.123235
[16]	H. Mohammadzadeh and M. Barati, A comprehensive evaluation of non-isothermal simultaneous reduction and carburization kinetics of W–Ni oxide nano-composite powder, Mater. Chem. Phys., 272(2021), art. No. 125027. doi: 10.1016/j.matchemphys.2021.125027
[17]	G.Y. Wei, J.K. Qu, Y.D. Zheng, T. Qi, and Q. Guo, Preparation of Cr₂O₃ precursors by hydrothermal reduction in the abundant Na₂CO₃ and Na₂CrO₄ solution, Int. J. Miner. Metall. Mater., 19(2012), No. 11, p. 978. doi: 10.1007/s12613-012-0658-3
[18]	H. Mohammadzadeh, H. Rezaie, H. Samim, M. Barati, and H. Razavizadeh, Synthesis of WC–Ni composite powders by thermochemical processing method based on co-precipitation, Mater. Chem. Phys., 149-150(2015), p. 145. doi: 10.1016/j.matchemphys.2014.09.057
[19]	S.Q. Wang, F.Q. Xie, X.Q. Wu, and L.Y. Chen, CeO₂ doped Al₂O₃ composite ceramic coatings fabricated on γ-TiAl alloys via cathodic plasma electrolytic deposition, J. Alloys Compd., 788(2019), p. 632. doi: 10.1016/j.jallcom.2019.02.065
[20]	G. Jena, R.P. George, and J. Philip, Fabrication of a robust graphene oxide-nano SiO₂-polydimethylsiloxane composite coating on carbon steel for marine applications, Prog. Org. Coat., 161(2021), art. No. 106462. doi: 10.1016/j.porgcoat.2021.106462
[21]	D. Jiang, H.Z. Cui, H. Chen, X.F. Zhao, G.L. Ma, and X.J. Song, Wear and corrosion properties of B₄C-added CoCrNiMo high-entropy alloy coatings with in-situ coherent ceramic, Mater. Des., 210(2021), art. No. 110068. doi: 10.1016/j.matdes.2021.110068
[22]	N. Rojas, M. Sánchez-Molina, G. Sevilla, et al., Coated stainless steels evaluation for bipolar plates in PEM water electrolysis conditions, Int. J. Hydrogen Energy, 46(2021), No. 51, p. 25929. doi: 10.1016/j.ijhydene.2021.03.100
[23]	S. Arcaro, F.A. Berutti, A.K. Alves, and C.P. Bergmann, MWCNTs produced by electrolysis of molten carbonate: Characteristics of the cathodic products grown on galvanized steel and nickel chrome electrodes, Appl. Surf. Sci., 466(2019), p. 367. doi: 10.1016/j.apsusc.2018.10.055
[24]	Y.H. Zhang, S.H. Zhang, Y. He, et al., Mechanical properties and corrosion resistance of pulse electrodeposited Ni–B/B₄C composite coatings, Surf. Coat. Technol., 421(2021), art. No. 127458. doi: 10.1016/j.surfcoat.2021.127458
[25]	H.M.A. El-Lateef and M.M. Khalaf, Fabrication and characterization of alumina-silica/poly(o-toluidine) nanocomposites as novel anticorrosive epoxy coatings films on carbon steel, Microchem. J., 158(2020), art. No. 105129. doi: 10.1016/j.microc.2020.105129
[26]	E. Ghahabi, Y. Shajari, M. Razavi, I. Mobasherpour, and S.A.T. Fard, Effect of iron content on the wear behavior and adhesion strength of TiC–Fe nanocomposite coatings on low carbon steel produced by air plasma spray, Ceram. Int., 46(2020), No. 3, p. 2670. doi: 10.1016/j.ceramint.2019.09.255
[27]	U.K. Chanda, A. Behera, S. Roy, and S. Pati, Evaluation of Ni–Cr–P coatings electrodeposited on low carbon steel bipolar plates for polymer electrolyte membrane fuel cell, Int. J. Hydrogen Energy, 43(2018), No. 52, p. 23430. doi: 10.1016/j.ijhydene.2018.10.218
[28]	V.S. Kathavate, D.N. Pawar, N.S. Bagal, and P.P. Deshpande, Role of nano ZnO particles in the electrodeposition and growth mechanism of phosphate coatings for enhancing the anti-corrosive performance of low carbon steel in 3.5% NaCl aqueous solution, J. Alloys Compd., 823(2020), art. No. 153812. doi: 10.1016/j.jallcom.2020.153812
[29]	R.P. Oliveira, D.C. Bertagnolli, E.A. Ferreira, L. da Silva, and A.S. Paula, Influence of Fe²⁺ oxidation and its antioxidant ascorbic acid as additive in Zn–Ni–Fe electrodeposition process on a low carbon steel, Surf. Coat. Technol., 349(2018), p. 874. doi: 10.1016/j.surfcoat.2018.06.064
[30]	D. Pritima, P. Padmanabhan, S. Marichamy, C. Sivakandhan, B. Stalin, and V. Dhinakaran, Material characterization and parametric effect on nickel-coated mild steel sheets by electroplating process, [in] A. Arockiarajan, M. Duraiselvam, and R. Raju, eds., Advances in Industrial Automation and Smart Manufacturing, Lecture Notes in Mechanical Engineering, Springer, Singapore, 2020, p. 465.
[31]	K. An, Y. Sui, Y.Q. Qing, et al., Synergistic reinforcement coating with anti-corrosion and UV aging resistance by filling modified CeO₂ nanoflakes, Colloids Surf. A, 625(2021), art. No. 126904. doi: 10.1016/j.colsurfa.2021.126904
[32]	V.P.M. Shajudheen, K.A. Rani, V.S. Kumar, A.U. Maheswari, M. Sivakumar, and S.S. Kumar, Comparison of anticorrosion studies of titanium dioxide and nickel oxide thin films fabricated by spray coating technique, Mater. Today Proc., 5(2018), No. 2, p. 8889. doi: 10.1016/j.matpr.2017.12.322
[33]	M. Li, Z.X. Jin, W. Zhang, et al., Comparison of chemical stability and corrosion resistance of group IV metal oxide films formed by thermal and plasma-enhanced atomic layer deposition, Sci. Rep., 9(2019), No. 1, art. No. 10438. doi: 10.1038/s41598-019-47049-z
[34]	A.A. Aal, Hard and corrosion resistant nanocomposite coating for Al alloy, Mater. Sci. Eng. A, 474(2008), No. 1-2, p. 181. doi: 10.1016/j.msea.2007.04.058
[35]	I.U. Haq, K. Akhtar, T.I. Khan, and A.A. Shah, Electrodeposition of Ni–Fe₂O₃ nanocomposite coating on steel, Surf. Coat. Technol., 235(2013), p. 691. doi: 10.1016/j.surfcoat.2013.08.048
[36]	S. Shanmugasamy, K. Balakrishnan, A. Subasri, S. Ramalingam, and A. Subramania, Development of CeO₂ nanorods reinforced electrodeposited nickel nanocomposite coating and its tribological and corrosion resistance properties, J. Rare Earths, 36(2018), No. 12, p. 1319. doi: 10.1016/j.jre.2018.06.004
[37]	S.A.N. Mehrabani, R. Ahmadzadeh, N. Abdian, A.T. Tabrizi, and H. Aghajani, Synthesis of Ni–GO nanocomposite coatings: Corrosion evaluation, Surf. Interfaces, 20(2020), art. No. 100546. doi: 10.1016/j.surfin.2020.100546
[38]	A. Rasooli, M.S. Safavi, and M.K. Hokmabad, Cr₂O₃ nanoparticles: A promising candidate to improve the mechanical properties and corrosion resistance of Ni–Co alloy coatings, Ceram. Int., 44(2018), No. 6, p. 6466. doi: 10.1016/j.ceramint.2018.01.044
[39]	M.T. Uddin, Y. Nicolas, C. Olivier, et al., Band alignment investigations of heterostructure NiO/TiO₂ nanomaterials used as efficient heterojunction earth-abundant metal oxide photocatalysts for hydrogen production, Phys. Chem. Chem. Phys., 19(2017), No. 29, p. 19279. doi: 10.1039/C7CP01300K
[40]	A.M. Oje, A.A. Ogwu, A.I. Oje, N. Tsendzughul, and S.U. Rahman, A comparative study of the corrosion and ion release behaviour of chromium oxide coatings exposed to saline, Ringer’s and Hank’s physiological solutions, Corros. Sci., 167(2020), art. No. 108533. doi: 10.1016/j.corsci.2020.108533
[41]	M. Sajjadnejad, S.M.S. Haghshenas, V.T. Targhi, et al., Wear behavior of alkaline pulsed electrodeposited nickel composite coatings reinforced by ZnO nanoparticles, Wear, 468-469(2021), art. No. 203591. doi: 10.1016/j.wear.2020.203591
[42]	M. Koroghli, V. Alimirzaloo, H. Mohammadzadeh, and M. Kavanlouei, Sintering behavior of WC–Co with additives of TiC, VC, and (Ta,Nb)C: Microstructural and mechanical features, J. Mater. Eng. Perform., 31(2022), No. 1, p. 814. doi: 10.1007/s11665-021-06209-x
[43]	S.A. Bakar, N. Soltani, W.M.M. Yunus, E. Saion, and A. Bahrami, Structural and paramagnetic behavior of spinel NiCr₂O₄ nanoparticles synthesized by thermal treatment method: Effect of calcination temperature, Solid State Commun., 192(2014), p. 15. doi: 10.1016/j.ssc.2014.05.002
[44]	N.A. Noshahi, K. Nadeem, and M. Kamran, Role of Mn doping on magnetic properties of multiferroic NiCr₂O₄ nanoparticles, Ceram. Int., 47(2021), No. 8, p. 10643. doi: 10.1016/j.ceramint.2020.12.177
[45]	A. Yousef and R. Tali, Preparation and characterization of spinel NiCr₂O₄ by co-precipitation method, Chem. Mater. Res., 9(2017), No. 4, p. 1.
[46]	D. Chen, Y. Yang, X.Q. Zhang, X.N. Wang, Y. Xu, and G.R. Qian, Mesoporous composite NiCr₂O₄/Al-MCM-41: A novel photocatalyst for enhanced hydrogen production, Int. J. Hydrogen Energy, 44(2019), No. 33, p. 18123. doi: 10.1016/j.ijhydene.2019.03.106
[47]	R.Z. Rasool, K. Nadeem, M. Kamran, F. Zeb, N. Ahmad, and M. Mumtaz, Comparison of anomalous magnetic properties of non-collinear CoCr₂O₄ and NiCr₂O₄ nanoparticles, J. Magn. Magn. Mater., 514(2020), art. No. 167225. doi: 10.1016/j.jmmm.2020.167225
[48]	H. Mohammadzadeh, H. Rezaie, M. Barati, D.W. Yu, and H.R. Samim, Kinetics of nonisothermal reduction and carburization of WO₃–NiO nano-composite powders by CO–CO₂, Int. J. Chem. Kinet., 51(2019), No. 7, p. 463. doi: 10.1002/kin.21269
[49]	A. Saraby-Reintjes and M. Fleischmann, Kinetics of electrodeposition of nickel from Watts baths, Electrochim. Acta, 29(1984), No. 4, p. 557. doi: 10.1016/0013-4686(84)87109-1
[50]	B.R. Tian and Y.F. Cheng, Electrolytic deposition of Ni–Co–Al₂O₃ composite coating on pipe steel for corrosion/erosion resistance in oil sand slurry, Electrochim. Acta, 53(2007), No. 2, p. 511. doi: 10.1016/j.electacta.2007.07.013
[51]	K. Aniołek, M. Kupka, and A. Barylski, Sliding wear resistance of oxide layers formed on a titanium surface during thermal oxidation, Wear, 356-357(2016), p. 23. doi: 10.1016/j.wear.2016.03.007
[52]	K.H. Hou, H.T. Wang, H.H. Sheu, and M.D. Ger, Preparation and wear resistance of electrodeposited Ni–W/diamond composite coatings, Appl. Surf. Sci., 308(2014), p. 372. doi: 10.1016/j.apsusc.2014.04.175
[53]	H. Gül, F. Kılıç, S. Aslan, A. Alp, and H. Akbulut, Characteristics of electro-co-deposited Ni–Al₂O₃ nano-particle reinforced metal matrix composite (MMC) coatings, Wear, 267(2009), No. 5-8, p. 976. doi: 10.1016/j.wear.2008.12.022
[54]	R.A. Shakoor, R. Kahraman, U. Waware, Y.X. Wang, and W. Gao, Properties of electrodeposited Ni–B–Al₂O₃ composite coatings, Mater. Des., 64(2014), p. 127. doi: 10.1016/j.matdes.2014.07.026
[55]	P. Baghery, M. Farzam, A.B. Mousavi, and M. Hosseini, Ni–TiO₂ nanocomposite coating with high resistance to corrosion and wear, Surf. Coat. Technol., 204(2010), No. 23, p. 3804. doi: 10.1016/j.surfcoat.2010.04.061
[56]	R. Badrnezhad, H. Pourfarzad, A.R. Madram, and M.R. Ganjali, Study of the corrosion resistance properties of Ni–P and Ni–P–C nanocomposite coatings in 3.5 wt % NaCl solution, Russ. J. Electrochem., 55(2019), No. 4, p. 272. doi: 10.1134/S1023193519030029
[57]	A. Saadati, B.N. Khiarak, A.A. Zahraei, A. Nourbakhsh, and H. Mohammadzadeh, Electrochemical characterization of electrophoretically deposited hydroxyapatite/chitosan/graphene oxide composite coating on Mg substrate, Surf. Interfaces, 25(2021), art. No. 101290. doi: 10.1016/j.surfin.2021.101290
[58]	M.M.K. Azar, H.S. Gugtapeh, and M. Rezaei, Evaluation of corrosion protection performance of electroplated zinc and zinc–graphene oxide nanocomposite coatings in air saturated 3.5 wt. % NaCl solution, Colloids Surf. A, 601(2020), art. No. 125051. doi: 10.1016/j.colsurfa.2020.125051
[59]	R.Q. Li, J. Liang, Y.Y. Hou, and Q.W. Chu, Enhanced corrosion performance of Zn coating by incorporating graphene oxide electrodeposited from deep eutectic solvent, RSC Adv., 5(2015), No. 75, p. 60698. doi: 10.1039/C5RA11577A
[60]	M.Y. Rekha and C. Srivastava, Microstructure and corrosion properties of zinc–graphene oxide composite coatings, Corros. Sci., 152(2019), p. 234. doi: 10.1016/j.corsci.2019.03.015
[61]	B. Szczygieł and M. Kołodziej, Corrosion resistance of Ni/Al₂O₃ coatings in NaCl solution, Trans. IMF, 83(2005), No. 4, p. 181. doi: 10.1179/002029605X61658
[62]	M.R. Barbosa, J.A. Bastos, J.J. Garcı́a-Jareño, and F. Vicente, Chloride role in the surface of nickel electrode, Electrochim. Acta, 44(1998), No. 6-7, p. 957. doi: 10.1016/S0013-4686(98)00199-6
[63]	J.O’M. Bockris and S.U.M. Khan, Surface Electrochemistry: A Molecular Level Approach, Springer Science & Business Media, New York, 1993.