Enhanced properties of stone coal-based composite phase change materials for thermal energy storage

Baoshan Xie; Huan Ma; Chuanchang Li; Jian Chen

doi:10.1007/s12613-023-2682-x

Volume 31 Issue 1

Jan. 2024

Turn off MathJax

Article Contents

Article Navigation > International Journal of Minerals, Metallurgy and Materials > 2024 > 31(1): 206-215

Baoshan Xie, Huan Ma, Chuanchang Li, and Jian Chen, Enhanced properties of stone coal-based composite phase change materials for thermal energy storage, Int. J. Miner. Metall. Mater., 31(2024), No. 1, pp. 206-215. https://doi.org/10.1007/s12613-023-2682-x

Cite this article as:

Baoshan Xie, Huan Ma, Chuanchang Li, and Jian Chen, Enhanced properties of stone coal-based composite phase change materials for thermal energy storage, Int. J. Miner. Metall. Mater., 31(2024), No. 1, pp. 206-215. https://doi.org/10.1007/s12613-023-2682-x

Citation:

PDF( 4687 KB)

Research Article

Enhanced properties of stone coal-based composite phase change materials for thermal energy storage

+ Author Affiliations

Corresponding author:
Chuanchang Li E-mail: chuanchangli@126.com
Received: 18 January 2023; Revised: 3 May 2023; Accepted: 22 May 2023; Available online: 31 May 2023

Abstract

Abstract

Phase change materials (PCMs) can be incorporated with low-cost minerals to synthesize composites for thermal energy storage in building applications. Stone coal (SC) after vanadium extraction treatment shows potential for secondary utilization in composite preparation. We prepared SC-based composite PCMs with SC as a matrix, stearic acid (SA) as a PCM, and expanded graphite (EG) as an additive. The combined roasting and acid leaching treatment of raw SC was conducted to understand the effect of vanadium extraction on promoting loading capacity. Results showed that the combined treatment of roasting at 900°C and leaching increased the SC loading of the composite by 6.2% by improving the specific surface area. The loading capacity and thermal conductivity of the composite obviously increased by 127% and 48.19%, respectively, due to the contribution of 3wt% EG. These data were supported by the high load of 66.69% and thermal conductivity of 0.59 W·m⁻¹·K⁻¹ of the designed composite. The obtained composite exhibited a phase change temperature of 52.17°C, melting latent heat of 121.5 J·g⁻¹, and good chemical compatibility. The SC-based composite has prospects in building applications exploiting the secondary utilization of minerals.
- thermal energy storage;
- phase change material;
- stone coal;
- vanadium extraction;
- secondary utilization

FullText(HTML)

Supplements(1)

Supplementary Information-s12613-023-2682-x.docx

References(50)

References

[1]	Our World in Data, 2021 Annual Percentage Change in Low-Carbon Energy Generation [2022-01-05]. https://ourworldindata.org/grapher/annual-percentage-change-low-carbon.
[2]	C.C. Li, M.F. Wang, Z.S. Chen, and J. Chen, Enhanced thermal conductivity and photo-to-thermal performance of diatomite-based composite phase change materials for thermal energy storage, J. Energy Storage, 34(2021), art. No. 102171. doi: 10.1016/j.est.2020.102171
[3]	B. Xiang, X.L. Cao, Y.P. Yuan, et al., A novel hybrid energy system combined with solar-road and soil-regenerator: Sensitivity analysis and optimization, Renewable Energy, 129(2018), p. 419. doi: 10.1016/j.renene.2018.06.027
[4]	X.J. Yang, L.L. Sun, Y.P. Yuan, X.D. Zhao, and X.L. Cao, Experimental investigation on performance comparison of PV/T-PCM system and PV/T system, Renewable Energy, 119(2018), p. 152. doi: 10.1016/j.renene.2017.11.094
[5]	T.T. Wang, C.P. Li, X.S. Xie, et al., Anode materials for aqueous zinc ion batteries: Mechanisms, properties, and perspectives, ACS Nano, 14(2020), No. 12, p. 16321. doi: 10.1021/acsnano.0c07041
[6]	A.D. Kamble, V.K. Saxena, P.D. Chavan, and V.A. Mendhe, Co-gasification of coal and biomass an emerging clean energy technology: Status and prospects of development in Indian context, Int. J. Min. Sci. Technol., 29(2019), No. 2, p. 171. doi: 10.1016/j.ijmst.2018.03.011
[7]	B. Yilmaz, B. Yüksel, G. Orhan, D. Aydin, and Z. Utlu, Synthesis and characterization of salt-impregnated anodic aluminum oxide composites for low-grade heat storage, Int. J. Miner. Metall. Mater., 27(2020), No. 1, p. 112. doi: 10.1007/s12613-019-1890-x
[8]	R.M. Wang, Z.Y. Gao, W.R. Wang, Y. Xue, and D.Y. Fu, Dynamic characteristics of the planetary gear train excited by time-varying meshing stiffness in the wind turbine, Int. J. Miner. Metall. Mater., 25(2018), No. 9, p. 1104. doi: 10.1007/s12613-018-1661-0
[9]	K.S. Reddy, V. Mudgal, and T.K. Mallick, Review of latent heat thermal energy storage for improved material stability and effective load management, J. Energy Storage, 15(2018), p. 205. doi: 10.1016/j.est.2017.11.005
[10]	X.B. Zhao, C.C. Li, K.H. Bai, B.S. Xie, J. Chen, and Q.X. Liu, Multiple structure graphite stabilized stearic acid as composite phase change materials for thermal energy storage, Int. J. Min. Sci. Technol., 32(2022), No. 6, p. 1419. doi: 10.1016/j.ijmst.2022.10.003
[11]	C.C. Tseng, R.L. Sikorski, R. Viskanta, and M.Y. Chen, Effect of foam properties on heat transfer in high temperature open-cell foam inserts, J. Am. Ceram. Soc., 95(2012), No. 6, p. 2015. doi: 10.1111/j.1551-2916.2012.05177.x
[12]	S.Y. Liu and H.M. Yang, Stearic acid hybridizing coal-series kaolin composite phase change material for thermal energy storage, Appl. Clay Sci., 101(2014), p. 277. doi: 10.1016/j.clay.2014.09.002
[13]	Y. He, X. Zhang, and Y.J. Zhang, Preparation technology of phase change perlite and performance research of phase change and temperature control mortar, Energy Build., 85(2014), p. 506. doi: 10.1016/j.enbuild.2014.09.023
[14]	H.L. Zhang, J. Baeyens, G. Cáceres, J. Degrève, and Y.Q. Lv, Thermal energy storage: Recent developments and practical aspects, Prog. Energy Combust. Sci., 53(2016), p. 1. doi: 10.1016/j.pecs.2015.10.003
[15]	Y.H. Chen, L.M. Jiang, Y. Fang, et al., Preparation and thermal energy storage properties of erythritol/polyaniline form-stable phase change material, Sol. Energy Mater. Sol. Cells, 200(2019), art. No. 109989. doi: 10.1016/j.solmat.2019.109989
[16]	J.L. Zeng, Y.H. Chen, L. Shu, et al., Preparation and thermal properties of exfoliated graphite/erythritol/mannitol eutectic composite as form-stable phase change material for thermal energy storage, Sol. Energy Mater. Sol. Cells, 178(2018), p. 84. doi: 10.1016/j.solmat.2018.01.012
[17]	G.Y. Fang, H. Li, L. Cao, and F. Shan, Preparation and thermal properties of form-stable palmitic acid/active aluminum oxide composites as phase change materials for latent heat storage, Mater. Chem. Phys., 137(2012), No. 2, p. 558. doi: 10.1016/j.matchemphys.2012.09.058
[18]	X. Jin, M.A. Medina, and X.S. Zhang, On the importance of the location of PCMs in building walls for enhanced thermal performance, Appl. Energy, 106(2013), p. 72. doi: 10.1016/j.apenergy.2012.12.079
[19]	A. Sarı and A. Biçer, Preparation and thermal energy storage properties of building material-based composites as novel form-stable PCMs, Energy Build., 51(2012), p. 73. doi: 10.1016/j.enbuild.2012.04.010
[20]	D. Zhou, C.Y. Zhao, and Y. Tian, Review on thermal energy storage with phase change materials (PCMs) in building applications, Appl. Energy, 92(2012), p. 593. doi: 10.1016/j.apenergy.2011.08.025
[21]	Y. Zhou, S.C. Wang, J.Q. Peng, et al., Liquid thermo-responsive smart window derived from hydrogel, Joule, 4(2020), No. 11, p. 2458. doi: 10.1016/j.joule.2020.09.001
[22]	C.C. Li, J. Ouyang, and H.M. Yang, Novel sensible thermal storage material from natural minerals, Phys. Chem. Miner., 40(2013), No. 9, p. 681. doi: 10.1007/s00269-013-0603-7
[23]	D. Feldman, D. Banu, and D. Hawes, Low chain esters of stearic acid as phase change materials for thermal energy storage in buildings, Sol. Energy Mater. Sol. Cells, 36(1995), No. 3, p. 311. doi: 10.1016/0927-0248(94)00186-3
[24]	B.S. Xie, C.C. Li, B. Zhang, L.X. Yang, G.Y. Xiao, and J. Chen, Evaluation of stearic acid/coconut shell charcoal composite phase change thermal energy storage materials for tankless solar water heater, Energy Built Environ., 1(2020), No. 2, p. 187. doi: 10.1016/j.enbenv.2019.08.003
[25]	D.Y. Zhang, C.C. Li, N.Z. Lin, B.S. Xie, and J. Chen, Mica-stabilized polyethylene glycol composite phase change materials for thermal energy storage, Int. J. Miner. Metall. Mater., 29(2022), No. 1, p. 168. doi: 10.1007/s12613-021-2357-4
[26]	A. Arteconi, N.J. Hewitt, and F. Polonara, State of the art of thermal storage for demand-side management, Appl. Energy, 93(2012), p. 371. doi: 10.1016/j.apenergy.2011.12.045
[27]	B.M. Li, D. Shu, R.F. Wang, et al., Polyethylene glycol/silica (PEG@SiO₂) composite inspired by the synthesis of mesoporous materials as shape-stabilized phase change material for energy storage, Renewable Energy, 145(2020), p. 84. doi: 10.1016/j.renene.2019.05.118
[28]	K.R. Arun, M. Srinivas, C.A. Saleel, and S. Jayaraj, Influence of the location of discrete macro-encapsulated thermal energy storage on the performance of a double pass solar plate collector system, Renewable Energy, 146(2020), p. 675. doi: 10.1016/j.renene.2019.07.036
[29]	X. Zeng, F. Wang, H.F. Zhang, L.J. Cui, J. Yu, and G.W. Xu, Extraction of vanadium from stone coal by roasting in a fluidized bed reactor, Fuel, 142(2015), p. 180. doi: 10.1016/j.fuel.2014.10.068
[30]	C.C. Li, B.S. Xie, J. Chen, Z.X. He, Z.S. Chen, and Y. Long, Emerging mineral-coupled composite phase change materials for thermal energy storage, Energy Convers. Manag., 183(2019), p. 633. doi: 10.1016/j.enconman.2019.01.021
[31]	D. Yang, F. Peng, H.R. Zhang, et al., Preparation of palygorskite paraffin nanocomposite suitable for thermal energy storage, Appl. Clay Sci., 126(2016), p. 190. doi: 10.1016/j.clay.2016.03.014
[32]	X.G. Zhang, R.L. Wen, Z.H. Huang, et al., Enhancement of thermal conductivity by the introduction of carbon nanotubes as a filler in paraffin/expanded perlite form-stable phase-change materials, Energy Build., 149(2017), p. 463. doi: 10.1016/j.enbuild.2017.05.037
[33]	A.H. Alkhazaleh, Preparation and characterization of isopropyl palmitate/expanded perlite and isopropyl palmitate/nanoclay composites as form-stable thermal energy storage materials for buildings, J. Energy Storage, 32(2020), art. No. 101679. doi: 10.1016/j.est.2020.101679
[34]	C.C. Li, M.F. Wang, B.S. Xie, H. Ma, and J. Chen, Enhanced properties of diatomite-based composite phase change materials for thermal energy storage, Renewable Energy, 147(2020), p. 265. doi: 10.1016/j.renene.2019.09.001
[35]	W.T. Zhou, Y.X. Han, Y.S. Sun, and Y.J. Li, Strengthening iron enrichment and dephosphorization of high-phosphorus oolitic hematite using high-temperature pretreatment, Int. J. Miner. Metall. Mater., 27(2020), No. 4, p. 443. doi: 10.1007/s12613-019-1897-3
[36]	M. Diaz-Somoano and M.R. Martinez-Tarazona, Retention of arsenic and selenium compounds using limestone in a coal gasification flue gas, Environ. Sci. Technol., 38(2004), No. 3, p. 899. doi: 10.1021/es034344b
[37]	C.C. Li, H. Ma, B.S. Xie, et al., A comparison of mineralogical and thermal storage characteristics for two types of stone coal, Minerals, 9(2019), No. 10, art. No. 594. doi: 10.3390/min9100594
[38]	R.L. Wen, X.G. Zhang, Z.H. Huang, et al., Preparation and thermal properties of fatty acid/diatomite form-stable composite phase change material for thermal energy storage, Sol. Energy Mater. Sol. Cells, 178(2018), p. 273. doi: 10.1016/j.solmat.2018.01.032
[39]	D.S. He, Y. Chen, P. Xiang, Z.J. Yu, and J.H. Potgieter, Study on the pre-treatment of oxidized zinc ore prior to flotation, Int. J. Miner. Metall. Mater., 25(2018), No. 2, p. 117. doi: 10.1007/s12613-018-1554-2
[40]	C.C. Li, B. Zhang, and Q.X. Liu, N-eicosane/expanded graphite as composite phase change materials for electro-driven thermal energy storage, J. Energy Storage, 29(2020), art. No. 101339. doi: 10.1016/j.est.2020.101339
[41]	B.S. Xie, C.C. Li, and Y.L. He, Advanced electro-heat conversion properties of microcrystalline graphite-based composite phase change material with the three-dimensional framework, J. Energy Storage, 59(2023), art. No. 106367. doi: 10.1016/j.est.2022.106367
[42]	J. Liu, Y.M. Zhang, J. Huang, T. Liu, Y.Z. Yuan, and X.B. Huang, Influence of mechanical activation on mineral properties and process of acid leaching from stone coal, Chin. J. Rare Met., 38(2014), No. 1, p. 115.
[43]	G.Y. Fang, H. Li, Z. Chen, and X. Liu, Preparation and characterization of stearic acid/expanded graphite composites as thermal energy storage materials, Energy, 35(2010), No. 12, p. 4622. doi: 10.1016/j.energy.2010.09.046
[44]	Y.P. Yuan, T.Y. Li, N. Zhang, X.L. Cao, and X.J. Yang, Investigation on thermal properties of capric–palmitic–stearic acid/activated carbon composite phase change materials for high-temperature cooling application, J. Therm. Anal. Calorim., 124(2016), No. 2, p. 881. doi: 10.1007/s10973-015-5173-0
[45]	C.C. Li, B.S. Xie, D.L. Chen, et al., Ultrathin graphite sheets stabilized stearic acid as a composite phase change material for thermal energy storage, Energy, 166(2019), p. 246. doi: 10.1016/j.energy.2018.10.082
[46]	C.C. Li, B. Zhang, B.S. Xie, et al., Stearic acid/expanded graphite as a composite phase change thermal energy storage material for tankless solar water heater, Sustain. Cities Soc., 44(2019), p. 458. doi: 10.1016/j.scs.2018.10.041
[47]	A. Sarı and A. Biçer, Thermal energy storage properties and thermal reliability of some fatty acid esters/building material composites as novel form-stable PCMs, Sol. Energy Mater. Sol. Cells, 101(2012), p. 114. doi: 10.1016/j.solmat.2012.02.026
[48]	A. Sarı, A. Karaipekli, and C. Alkan, Preparation, characterization and thermal properties of lauric acid/expanded perlite as novel form-stable composite phase change material, Chem. Eng. J., 155(2009), No. 3, p. 899. doi: 10.1016/j.cej.2009.09.005
[49]	Z.M. Sun, Y.Z. Zhang, S.L. Zheng, Y. Park, and R.L. Frost, Preparation and thermal energy storage properties of paraffin/calcined diatomite composites as form-stable phase change materials, Thermochim. Acta, 558(2013), p. 16. doi: 10.1016/j.tca.2013.02.005
[50]	A. Sarı and A. Karaipekli, Preparation, thermal properties and thermal reliability of capric acid/expanded perlite composite for thermal energy storage, Mater. Chem. Phys., 109(2008), No. 2-3, p. 459. doi: 10.1016/j.matchemphys.2007.12.016