Research progress of CO<sub>2</sub> capture and mineralization based on natural minerals

Chenguang Qian; Chunquan Li; Peng Huang; Jialin Liang; Xin Zhang; Jifa Wang; Jianbing Wang; Zhiming Sun

doi:10.1007/s12613-023-2785-4

Volume 31 Issue 6

Jun. 2024

Turn off MathJax

Article Contents

Article Navigation > International Journal of Minerals, Metallurgy and Materials > 2024 > 31(6): 1208-1227

Chenguang Qian, Chunquan Li, Peng Huang, Jialin Liang, Xin Zhang, Jifa Wang, Jianbing Wang, and Zhiming Sun, Research progress of CO₂ capture and mineralization based on natural minerals, Int. J. Miner. Metall. Mater., 31(2024), No. 6, pp. 1208-1227. https://doi.org/10.1007/s12613-023-2785-4

Cite this article as:

Chenguang Qian, Chunquan Li, Peng Huang, Jialin Liang, Xin Zhang, Jifa Wang, Jianbing Wang, and Zhiming Sun, Research progress of CO2 capture and mineralization based on natural minerals, Int. J. Miner. Metall. Mater., 31(2024), No. 6, pp. 1208-1227. https://doi.org/10.1007/s12613-023-2785-4

Citation:

PDF( 3849 KB)

Invited Review

Research progress of CO₂ capture and mineralization based on natural minerals

+ Author Affiliations

Corresponding authors:
Jianbing Wang E-mail: wangjb@cumtb.edu.cn

Zhiming Sun E-mail: zhimingsun@cumtb.edu.cn
Received: 10 May 2023; Revised: 8 November 2023; Accepted: 17 November 2023; Available online: 21 November 2023

Abstract

Abstract

Natural minerals, such as kaolinite, halloysite, montmorillonite, attapulgite, bentonite, sepiolite, forsterite, and wollastonite, have considerable potential for use in CO₂ capture and mineralization due to their abundant reserves, low cost, excellent mechanical properties, and chemical stability. Over the past decades, various methods, such as those involving heat, acid, alkali, organic amine, amino silane, and ionic liquid, have been employed to enhance the CO₂ capture performance of natural minerals to attain high specific surface area, a large number of pore structures, and rich active sites. Future research on CO₂ capture by natural minerals will focus on the full utilization of the properties of natural minerals, adoption of suitable modification methods, and preparation of composite materials with high specific surface area and rich active sites. In addition, we provide a summary of the principle and technical route of direct and indirect mineralization of CO₂ by natural minerals. This process uses minerals with high calcium and magnesium contents, such as forsterite (Mg₂SiO₄), serpentine [Mg₃Si₂O(OH)₄], and wollastonite (CaSiO₃). The research status of indirect mineralization of CO₂ using hydrochloric acid, acetic acid, molten salt, and ammonium salt as media is also introduced in detail. The recovery of additives and high-value-added products during the mineralization process to increase economic benefits is another focus of future research on CO₂ mineralization by natural minerals.
- natural mineral;
- carbon dioxide capture;
- modification;
- composite material;
- carbon dioxide mineralization

FullText(HTML)

Supplements(0)

References(124)

References

[1]	B. Bereiter, S. Eggleston, J. Schmitt, et al., Revision of the EPICA Dome C CO₂ record from 800 to 600 kyr before present, Geophys. Res. Lett., 42(2015), No. 2, p. 542. doi: 10.1002/2014GL061957
[2]	M.S.B. Reddy, D. Ponnamma, K.K. Sadasivuni, B. Kumar, and A.M. Abdullah, Carbon dioxide adsorption based on porous materials, RSC Adv., 11(2021), No. 21, p. 12658. doi: 10.1039/D0RA10902A
[3]	M.R. Raupach, G. Marland, P. Ciais, et al., Global and regional drivers of accelerating CO₂ emissions, Proc. Natl. Acad. Sci. USA, 104(2007), No. 24, p. 10288. doi: 10.1073/pnas.0700609104
[4]	J. Blamey, E.J. Anthony, J. Wang, and P.S. Fennell, The calcium looping cycle for large-scale CO₂ capture, Prog. Energy Combust. Sci., 36(2010), No. 2, p. 260. doi: 10.1016/j.pecs.2009.10.001
[5]	J.M. Pandolfi, S.R. Connolly, D.J. Marshall, and A.L. Cohen, Projecting coral reef futures under global warming and ocean acidification, Science, 333(2011), No. 6041, p. 418. doi: 10.1126/science.1204794
[6]	M.J. Hu, M.Z. Yin, L.W. Hu, P.J. Liu, S. Wang, and J.B. Ge, High-value utilization of CO₂ to synthesize sulfur-doped carbon nanofibers with excellent capacitive performance, Int. J. Miner. Metall. Mater., 27(2020), No. 12, p. 1666. doi: 10.1007/s12613-020-2120-2
[7]	M.Q. Cao, K. Liu, H.M. Zhou, et al., Hierarchical TiO₂ nanorods with a highly active surface for photocatalytic CO₂ reduction, J. Cent. South Univ., 26(2019), No. 6, p. 1503. doi: 10.1007/s11771-019-4106-7
[8]	H.Q. Yang, Z.H. Xu, M.H. Fan, et al., Progress in carbon dioxide separation and capture: A review, J. Environ. Sci., 20(2008), No. 1, p. 14. doi: 10.1016/S1001-0742(08)60002-9
[9]	K. Menyah and Y. Wolde-Rufael, CO₂ emissions, nuclear energy, renewable energy and economic growth in the US, Energy Policy, 38(2010), No. 6, p. 2911. doi: 10.1016/j.enpol.2010.01.024
[10]	P. Wang, X.B. Mao, and S.E. Chen, CO₂ sequestration characteristics in the cementitious material based on gangue backfilling mining method, Int. J. Min. Sci. Technol., 29(2019), No. 5, p. 721. doi: 10.1016/j.ijmst.2019.03.005
[11]	Y.C. Hu, Y.F. Guo, J. Sun, H.L. Li, and W.Q. Liu, Progress in MgO sorbents for cyclic CO₂ capture: A comprehensive review, J. Mater. Chem. A, 7(2019), No. 35, p. 20103. doi: 10.1039/C9TA06930E
[12]	S. Paltsev, J. Morris, H. Kheshgi, and H. Herzog, Hard-to-Abate sectors: The role of industrial carbon capture and storage (CCS) in emission mitigation, Appl. Energy, 300(2021), art. No. 117322. doi: 10.1016/j.apenergy.2021.117322
[13]	Z.E. Zhang, T. Wang, M.J. Blunt, et al., Advances in carbon capture, utilization and storage, Appl. Energy, 278(2020), art. No. 115627. doi: 10.1016/j.apenergy.2020.115627
[14]	L.P. Fu, Z.K. Ren, W.Z. Si, et al., Research progress on CO₂ capture and utilization technology, J. CO₂ Util., 66(2022), art. No. 102260. doi: 10.1016/j.jcou.2022.102260
[15]	J.Y. Yan, Carbon capture and storage (CCS), Appl. Energy, 148(2015), p. A1. doi: 10.1016/j.apenergy.2015.03.019
[16]	C. Hepburn, E. Adlen, J. Beddington, et al., The technological and economic prospects for CO₂ utilization and removal, Nature, 575(2019), No. 7781, p. 87. doi: 10.1038/s41586-019-1681-6
[17]	Z.Q. Liu, J. Zheng, Y. Wang, and X. Liu, Selective reduction of carbon dioxide into amorphous carbon over activated natural magnetite, Int. J. Miner. Metall. Mater., 28(2021), No. 2, p. 231. doi: 10.1007/s12613-020-2034-z
[18]	X. Lu, W.J. Tian, H. Li, X.J. Li, K. Quan, and H. Bai, Decarbonization options of the iron and steelmaking industry based on a three-dimensional analysis, Int. J. Miner. Metall. Mater., 30(2023), No. 2, p. 388. doi: 10.1007/s12613-022-2475-7
[19]	P. Li, S.Y. Pan, S.L. Pei, Y.J. Lin, and P.C. Chiang, Challenges and perspectives on carbon fixation and utilization technologies: An overview, Aerosol Air Qual. Res., 16(2016), No. 6, p. 1327. doi: 10.4209/aaqr.2015.12.0698
[20]	E.R. Bobicki, Q.X. Liu, Z.H. Xu, and H.B. Zeng, Carbon capture and storage using alkaline industrial wastes, Prog. Energy Combust. Sci., 38(2012), No. 2, p. 302. doi: 10.1016/j.pecs.2011.11.002
[21]	M. Pera-Titus, Porous inorganic membranes for CO₂ capture: Present and prospects, Chem. Rev., 114(2014), No. 2, p. 1413. doi: 10.1021/cr400237k
[22]	K. Wang, X.L. Yan, and S. Komarneni, CO₂ adsorption by several types of pillared montmorillonite clays, Appl. Petrochem. Res., 8(2018), No. 3, p. 173. doi: 10.1007/s13203-018-0206-9
[23]	T.C. Merkel, H.Q. Lin, X.T. Wei, and R. Baker, Power plant post-combustion carbon dioxide capture: An opportunity for membranes, J. Membr. Sci., 359(2010), No. 1-2, p. 126. doi: 10.1016/j.memsci.2009.10.041
[24]	J. Godin, W.Z. Liu, S. Ren, and C.B. Xu, Advances in recovery and utilization of carbon dioxide: A brief review, J. Environ. Chem. Eng., 9(2021), No. 4, art. No. 105644. doi: 10.1016/j.jece.2021.105644
[25]	H.Y. Tao, X. Qian, Y. Zhou, and H.F. Cheng, Research progress of clay minerals in carbon dioxide capture, Renewable Sustainable Energy Rev., 164(2022), art. No. 112536. doi: 10.1016/j.rser.2022.112536
[26]	N. MacDowell, N. Florin, A. Buchard, et al., An overview of CO₂ capture technologies, Energy Environ. Sci., 3(2010), No. 11, p. 1645. doi: 10.1039/c004106h
[27]	R. Czarnota, E. Knapik, P. Wojnarowski, D. Janiga, and J. Stopa, Carbon dioxide separation techonlogies, Arch. Min. Sci., 64(2019), No. 3, p. 487.
[28]	Z.H. Ban, K.K. Lau, and M. Azmi, Physical absorption of CO₂ capture: A review, [in] L. Ismail, K.A. Azizli, T. Murugesan, S. Ganguly, and Y. Uemura, eds., Proceedings of the International Conference on Process Engineering and Advanced Materials 2012 (ICPEAM 2012 ), Kuala Lumpur, 2012, p. 134.
[29]	B.C. Liu, Y.S. Qiao, Q. Li, W.G. Jia, and T. Wang, CO₂ separation from CO₂-EOR associated gas using hollower fiber membranes: A process design and simulation study, J. Nat. Gas Sci. Eng., 100(2022), art. No. 104451. doi: 10.1016/j.jngse.2022.104451
[30]	Y. Han, G. Hwang, H. Kim, B.Z. Haznedaroglu, and B. Lee, Amine-impregnated millimeter-sized spherical silica foams with hierarchical mesoporous-macroporous structure for CO₂ capture, Chem. Eng. J., 259(2015), p. 653. doi: 10.1016/j.cej.2014.08.043
[31]	D.Y.C. Leung, G. Caramanna, and M.M. Maroto-Valer, An overview of current status of carbon dioxide capture and storage technologies, Renewable Sustainable Energy Rev., 39(2014), p. 426. doi: 10.1016/j.rser.2014.07.093
[32]	J.Y. Bae, CO₂ capture by amine-functionalized mesoporous hollow silica, J. Nanosci. Nanotechnol., 17(2017), No. 10, p. 7418. doi: 10.1166/jnn.2017.14778
[33]	W. Zhang, Y.S. Bao, and A. Bao, Preparation of nitrogen-doped hierarchical porous carbon materials by a template-free method and application to CO₂ capture, J. Environ. Chem. Eng., 8(2020), No. 3, art. No. 103732. doi: 10.1016/j.jece.2020.103732
[34]	T. Du, L.Y. Liu, P. Xiao, S. Che, and H.M. Wang, Preparation of zeolite NaA for CO₂ capture from nickel laterite residue, Int. J. Miner. Metall. Mater., 21(2014), No. 8, p. 820. doi: 10.1007/s12613-014-0976-8
[35]	Z.C. Gao, L.Q. Li, H.L. Li, R.F. Chen, S. Wang, and Y.G. Wang, A hybrid zeolitic imidazolate framework Co-IM-mIM membrane for gas separation, J. Cent. South Univ., 24(2017), No. 8, p. 1727. doi: 10.1007/s11771-017-3580-z
[36]	S.P. Wang, S.L. Yan, X.B. Ma, and J.L. Gong, Recent advances in capture of carbon dioxide using alkali-metal-based oxides, Energy Environ. Sci., 4(2011), No. 10, p. 3805. doi: 10.1039/c1ee01116b
[37]	F.O. Ochedi, Y.X. Liu, and Y.G. Adewuyi, State-of-the-art review on capture of CO₂ using adsorbents prepared from waste materials, Process. Saf. Environ. Prot., 139(2020), p. 1. doi: 10.1016/j.psep.2020.03.036
[38]	F. Fang, Z.S. Li, and N.S. Cai, CO₂ capture from flue gases using a fluidized bed reactor with limestone, Korean J. Chem. Eng., 26(2009), No. 5, p. 1414. doi: 10.1007/s11814-009-0198-3
[39]	J.I. Ida, R.T. Xiong, and Y.S. Lin, Synthesis and CO₂ sorption properties of pure and modified lithium zirconate, Sep. Purif. Technol., 36(2004), No. 1, p. 41. doi: 10.1016/S1383-5866(03)00151-5
[40]	N. Chouikhi, J.A. Cecilia, E. Vilarrasa-García, et al., CO₂ adsorption of materials synthesized from clay minerals: A review, Minerals, 9(2019), No. 9, art. No. 514. doi: 10.3390/min9090514
[41]	F.M. Orr, Carbon capture, utilization, and storage: An update, SPE J., 23(2018), No. 6, p. 2444. doi: 10.2118/194190-PA
[42]	W.Z. Liu, L.M. Teng, S. Rohani, et al., CO₂ mineral carbonation using industrial solid wastes: A review of recent developments, Chem. Eng. J., 416(2021), art. No. 129093. doi: 10.1016/j.cej.2021.129093
[43]	S. Park, CO₂ reduction-conversion to precipitates and morphological control through the application of the mineral carbonation mechanism, Energy, 153(2018), p. 413. doi: 10.1016/j.energy.2018.04.086
[44]	M.Y. He, W.Z. Liu, Q.C. Liu, and Z.F. Qin, Research progress in CO₂ mineral sequestration technology, Chem. Ind. Eng. Prog., 41(2022), No. 4, p. 1825.
[45]	B. Wang, Z.H. Pan, H.G. Cheng, Z.E. Zhang, and F.Q. Cheng, A review of carbon dioxide sequestration by mineral carbonation of industrial byproduct gypsum, J. Cleaner Prod., 302(2021), art. No. 126930. doi: 10.1016/j.jclepro.2021.126930
[46]	H.P. Xie, H.R. Yue, J.H. Zhu, et al., Scientific and engineering progress in CO₂ mineralization using industrial waste and natural minerals, Engineering, 1(2015), No. 1, p. 150. doi: 10.15302/J-ENG-2015017
[47]	Y.H. Chen and D.L. Lu, CO₂ capture by kaolinite and its adsorption mechanism, Appl. Clay Sci., 104(2015), p. 221. doi: 10.1016/j.clay.2014.11.036
[48]	Q.H. Liu, J.L. Jiang, F. Zhang, et al., CO₂ fixation mechanism of kaolin treated with organic amines at varied temperatures and pressure, Appl. Clay Sci., 228(2022), art. No. 106638. doi: 10.1016/j.clay.2022.106638
[49]	Y.H. Chen and D.L. Lu, Amine modification on kaolinites to enhance CO₂ adsorption, J. Colloid Interface Sci., 436(2014), p. 47. doi: 10.1016/j.jcis.2014.08.050
[50]	X.D. Du, D.D. Pang, Y. Zhao, Z.K. Hou, H.L. Wang, and Y.G. Cheng, Investigation into the adsorption of CO₂, N₂ and CH₄ on kaolinite clay, Arabian J. Chem., 15(2022), No. 3, art. No. 103665. doi: 10.1016/j.arabjc.2021.103665
[51]	K. Ramadass, G. Singh, K.S. Lakhi, et al., Halloysite nanotubes: Novel and eco-friendly adsorbents for high-pressure CO₂ capture, Microporous Mesoporous Mater., 277(2019), p. 229. doi: 10.1016/j.micromeso.2018.10.035
[52]	J. Kim, I. Rubino, J.Y. Lee, and H.J. Choi, Application of halloysite nanotubes for carbon dioxide capture, Mater. Res. Express, 3(2016), No. 4, art. No. 045019. doi: 10.1088/2053-1591/3/4/045019
[53]	C. Chen, D.W. Park, and W.S. Ahn, Surface modification of a low cost bentonite for post-combustion CO₂ capture, Appl. Surf. Sci., 283(2013), p. 699. doi: 10.1016/j.apsusc.2013.07.005
[54]	N. Horri, E.S. Sanz- Pérez, A. Arencibia, R. Sanz, N. Frini-Srasra, and E. Srasra, Amine grafting of acid-activated bentonite for carbon dioxide capture, Appl. Clay Sci., 180(2019), art. No. 105195. doi: 10.1016/j.clay.2019.105195
[55]	E. Vilarrasa-García, J.A. Cecilia, E.R. Aguado, et al., Amino-modified pillared adsorbent from water-treatment solid wastes applied to CO₂/N₂ separation, Adsorption, 23(2017), No. 2, p. 405.
[56]	G. Gómez-Pozuelo, E.S. Sanz-Pérez, A. Arencibia, P. Pizarro, R. Sanz, and D.P. Serrano, CO₂ adsorption on amine-functionalized clays, Microporous Mesoporous Mater., 282(2019), p. 38. doi: 10.1016/j.micromeso.2019.03.012
[57]	J.A. Cecilia, E. Vilarrasa-García, C.L. Cavalcante, D.C.S. Azevedo, F. Franco, and E. Rodríguez-Castellón, Evaluation of two fibrous clay minerals (sepiolite and palygorskite) for CO₂ capture, J. Environ. Chem. Eng., 6(2018), No. 4, p. 4573. doi: 10.1016/j.jece.2018.07.001
[58]	H. Zhu, S.M. Li, J.F. Zhang, L.K. Zhao, and Y. Huang, A highly effective and low-cost sepiolite-based solid amine adsorbent for CO₂ capture in post-combustion, Sep. Purif. Technol., 306(2023), art. No. 122627. doi: 10.1016/j.seppur.2022.122627
[59]	K. Quiroz-Estrada, M. Hernández-Espinosa, F. Rojas, R. Portillo, E. Rubio, and L. López, N₂ and CO₂ adsorption by soils with high kaolinite content from San Juan Amecac, Puebla, México, Minerals, 6(2016), No. 3, art. No. 73. doi: 10.3390/min6030073
[60]	T.F. Bates, F. Hildebrand, and A. Swineford, Morphology and structure of endellite and halloysite, Am. Mineral., 35(1950), p. 463.
[61]	Y.M. Lvov, D.G. Shchukin, H. Möhwald, and R.R. Price, Halloysite clay nanotubes for controlled release of protective agents, ACS Nano, 2(2008), No. 5, p. 814. doi: 10.1021/nn800259q
[62]	A. Hamza, I.A. Hussein, M.J. Al-Marri, M. Mahmoud, and R. Shawabkeh, Impact of clays on CO₂ adsorption and enhanced gas recovery in sandstone reservoirs, Int. J. Greenh. Gas Contr., 106(2021), art. No. 103286. doi: 10.1016/j.ijggc.2021.103286
[63]	W.B. Wang, B. Mu, J.P. Zhang, and A.Q. Wang, Attapulgite: From clay minerals to functional materials, Sci. Sin. Chim, 48(2018), No. 12, p. 1432. doi: 10.1360/N032018-00193
[64]	J. Ouyang, W. Gu, C.H. Zheng, et al., Polyethyleneimine (PEI) loaded MgO–SiO₂ nanofibers from sepiolite minerals for reusable CO₂ capture/release applications, Appl. Clay Sci., 152(2018), p. 267. doi: 10.1016/j.clay.2017.11.023
[65]	W.L. Wang, J. Xiao, X.L. Wei, J. Ding, X.X. Wang, and C.S. Song, Development of a new clay supported polyethylenimine composite for CO₂ capture, Appl. Energy, 113(2014), p. 334. doi: 10.1016/j.apenergy.2013.03.090
[66]	M.Y. Niu, H.M. Yang, X.C. Zhang, Y.T. Wang, and A.D. Tang, Amine-impregnated mesoporous silica nanotube as an emerging nanocomposite for CO₂ capture, ACS Appl. Mater. Interfaces, 8(2016), No. 27, p. 17312. doi: 10.1021/acsami.6b05044
[67]	Ouyang, C.H. Zheng, W. Gu, Y. Zhang, H.M. Yang, and S.L. Suib, Textural properties determined CO₂ capture of tetraethylenepentamine loaded SiO₂ nanowires from α-sepiolite, Chem. Eng. J., 337(2018), p. 342. doi: 10.1016/j.cej.2017.12.109
[68]	S. Barakan and V. Aghazadeh, The advantages of clay mineral modification methods for enhancing adsorption efficiency in wastewater treatment: A review, Environ. Sci. Pollut. Res. Int., 28(2021), No. 3, p. 2572. doi: 10.1007/s11356-020-10985-9
[69]	Z.L. Huang, D. Karami, and N. Mahinpey, Study on the efficiency of multiple amino groups in ionic liquids on their sorbents performance for low-temperature CO₂ capture, Chem. Eng. Res. Des., 167(2021), p. 198. doi: 10.1016/j.cherd.2021.01.016
[70]	G.T. Rochelle, Amine scrubbing for CO₂ capture, Science, 325(2009), No. 5948, p. 1652. doi: 10.1126/science.1176731
[71]	U. Bhatti, D. Sivanesan, S. Nam, S.Y. Park, and I.H. Baek, Efficient Ag₂O–Ag₂CO₃ catalytic cycle and its role in minimizing the energy requirement of amine solvent regeneration for CO₂ capture, ACS Sustainable Chem. Eng., 7(2019), No. 12, p. 10234. doi: 10.1021/acssuschemeng.9b01709
[72]	A. Veawab, P. Tontiwachwuthikul, and A. Chakma, Corrosion behavior of carbon steel in the CO₂ absorption process using aqueous amine solutions, Ind. Eng. Chem. Res., 38(1999), No. 10, p. 3917. doi: 10.1021/ie9901630
[73]	P.F. Xie, L.Q. Li, Z.C. He, and C.Q. Su, Gas-liquid mass transfer of carbon dioxide capture by magnesium hydroxide slurry in a bubble column reactor, J. Cent. South Univ., 26(2019), No. 6, p. 1592. doi: 10.1007/s11771-019-4115-6
[74]	F.S. Taheri, A. Ghaemi, A. Maleki, and S. Shahhosseini, High CO₂ adsorption on amine-functionalized improved mesoporous silica nanotube as an eco-friendly nanocomposite, Energy Fuels, 33(2019), No. 6, p. 5384. doi: 10.1021/acs.energyfuels.9b00703
[75]	J. Ouyang, W. Gu, Y. Zhang, et al., CO₂ capturing performances of millimeter scale beads made by tetraethylenepentamine loaded ultra-fine palygorskite powders from jet pulverization, Chem. Eng. J., 341(2018), p. 432. doi: 10.1016/j.cej.2018.02.040
[76]	C. Chen, J. Kim and W.-S. Ahn, CO₂ capture by amine-functionalized nanoporous materials: A review, Korean J. Chem. Eng., 31(2014), No. 11, p. 1919. doi: 10.1007/s11814-014-0257-2
[77]	H.H. Cai, F. Bao, J. Gao, T. Chen, S. Wang, and R. Ma, Preparation and characterization of novel carbon dioxide adsorbents based on polyethylenimine-modified halloysite nanotubes, Environ. Technol., 36(2015), No. 9-12, p. 1273.
[78]	M. Irani, M.H. Fan, H. Ismail, A. Tuwati, B. Dutcher, and A.G. Russell, Modified nanosepiolite as an inexpensive support of tetraethylenepentamine for CO₂ sorption, Nano Energy, 11(2015), p. 235. doi: 10.1016/j.nanoen.2014.11.005
[79]	W.L. Wang, X.X. Wang, C.S. Song, X.L. Wei, J. Ding, and J. Xiao, Sulfuric acid modified bentonite as the support of tetraethylenepentamine for CO₂ capture, Energy Fuels, 27(2013), No. 3, p. 1538. doi: 10.1021/ef3021816
[80]	E. Vilarrasa-García, J.A. Cecilia, D.C.S. Azevedo, C.L. Cavalcante, and E. Rodríguez-Castellón, Evaluation of porous clay heterostructures modified with amine species as adsorbent for the CO₂ capture, Microporous Mesoporous Mater., 249(2017), p. 25. doi: 10.1016/j.micromeso.2017.04.049
[81]	M. Atilhan, S. Atilhan, R. Ullah, et al., High-pressure methane, carbon dioxide, and nitrogen adsorption on amine-impregnated porous montmorillonite nanoclays, J. Chem. Eng. Data, 61(2016), No. 8, p. 2749. doi: 10.1021/acs.jced.6b00134
[82]	G. Singh, K.S. Lakhi, I.Y. Kim, et al., Highly efficient method for the synthesis of activated mesoporous biocarbons with extremely high surface area for high-pressure CO₂ adsorption, ACS Appl. Mater. Interfaces, 9(2017), No. 35, p. 29782. doi: 10.1021/acsami.7b08797
[83]	L.L. He, M.H. Fan, B. Dutcher, et al., Dynamic separation of ultradilute CO₂ with a nanoporous amine-based sorbent, Chem. Eng. J., 189-190(2012), p. 13. doi: 10.1016/j.cej.2012.02.013
[84]	S. Chen, B. Jia, Y. Peng, et al., CO₂ adsorption behavior of 3-aminopropyltrimethoxysilane-functionalized attapulgite with the grafting modification method, Ind. Eng. Chem. Res., 60(2021), No. 47, p. 17150. doi: 10.1021/acs.iecr.1c03436
[85]	S. Park, J. Ryu, H.Y. Cho, and D. Sohn, Halloysite nanotubes loaded with HKUST-1 for CO₂ adsorption, Colloids Surf. A, 651(2022), art. No. 129750. doi: 10.1016/j.colsurfa.2022.129750
[86]	L. Stevens, K. Williams, W.Y. Han, et al., Preparation and CO₂ adsorption of diamine modified montmorillonite via exfoliation grafting route, Chem. Eng. J., 215-216(2013), p. 699. doi: 10.1016/j.cej.2012.11.058
[87]	S. Chen, Y.N. Chao, J.M. Wu, H. Ye, X. Luo, and Z.W. Liang, A new solid adsorbent for CO₂ capture based on an amine polycarboxylate ionic liquid with multiple absorption sites, Ind. Eng. Chem. Res., 61(2022), No. 32, p. 11953. doi: 10.1021/acs.iecr.2c01797
[88]	S.Z. Hu and H.L. Zhang, Analysis of CO₂ adsorption performance of ionic liquid modified halloysite, Ion Exch. Adsorpt., 37(2021), No. 6, p. 543.
[89]	L.A. Galeano, M.Á. Vicente, and A. Gil, Catalytic degradation of organic pollutants in aqueous streams by mixed Al/M-pillared clays (M = Fe, Cu, Mn), Catal. Rev. Sci. Eng., 56(2014), No. 3, p. 239. doi: 10.1080/01614940.2014.904182
[90]	J.T. Kloprogge, Synthesis of smectites and porous pillared clay catalysts: A review, J. Porous Mater., 5(1998), No. 1, p. 5. doi: 10.1023/A:1009625913781
[91]	K. Wu, Q. Ye, R.P. Wu, S. Chen, and H.X. Dai, Carbon dioxide adsorption behaviors of aluminum-pillared montmorillonite-supported alkaline earth metals, J. Environ. Sci., 98(2020), p. 109. doi: 10.1016/j.jes.2020.05.025
[92]	K. Wu, Q. Ye, R.P. Wu, and H.X. Dai, Alkali metal-promoted aluminum-pillared montmorillonites: High-performance CO₂ adsorbents, J. Solid State Chem., 291(2020), art. No. 121585. doi: 10.1016/j.jssc.2020.121585
[93]	R. Sanz, G. Calleja, A. Arencibia, and E.S. Sanz-Pérez, Development of high efficiency adsorbents for CO₂ capture based on a double-functionalization method of grafting and impregnation, J. Mater. Chem. A, 1(2013), No. 6, p. 1956. doi: 10.1039/c2ta01343f
[94]	W. Seifritz, CO₂ disposal by means of silicates, Nature, 345(1990), No. 6275, art. No. 486.
[95]	K.S. Lackner, C.H. Wendt, D.P. Butt, E.L. Joyce, and D.H. Sharp, Carbon dioxide disposal in carbonate minerals, Energy, 20(1995), No. 11, p. 1153. doi: 10.1016/0360-5442(95)00071-N
[96]	W.J. Ding, J. Ouyang, and H.M. Yang, Synthesis and characterization of nesquehonite (MgCO₃·3H₂O) powders from natural talc, Powder Technol., 292(2016), p. 169. doi: 10.1016/j.powtec.2016.01.037
[97]	K.S. Lackner, D.P. Butt, and C.H. Wendt, Progress on binding CO₂ in mineral substrates, Energy Convers. Manage., 38(1997), p. S259. doi: 10.1016/S0196-8904(96)00279-8
[98]	W.K. O’Connor, D.C. Dahlin, G.E. Rush, C.L. Dahlin, and W.K. Collins, Carbon dioxide sequestration by direct mineral carbonation: Process mineralogy of feed and products, Min. Metall. Explor., 19(2002), No. 2, p. 95.
[99]	W.J.J. Huijgen, G.J. Witkamp, and R.N.J. Comans, Mechanisms of aqueous wollastonite carbonation as a possible CO₂ sequestration process, Chem. Eng. Sci., 61(2006), No. 13, p. 4242. doi: 10.1016/j.ces.2006.01.048
[100]	C.Y. Tai, W.R. Chen, and S.M. Shih, Factors affecting wollastonite carbonation under CO₂ supercritical conditions, AlChE. J., 52(2006), No. 1, p. 292. doi: 10.1002/aic.10572
[101]	R. Zevenhoven, A. Wiklund, J. Fagerlund, et al., Carbonation of calcium-containing mineral and industrial by-products, Front. Chem. Eng. China, 4(2010), No. 2, p. 110. doi: 10.1007/s11705-009-0238-x
[102]	A.A. Fara, M.R. Rayson, G.F. Brent, T.K. Oliver, M. Stockenhuber, and E.M. Kennedy, Formation of magnesite and hydromagnesite from direct aqueous carbonation of thermally activated lizardite, Environ. Prog. Sustainable Energy, 38(2019), No. 3, art. No. e13244. doi: 10.1002/ep.13244
[103]	F. Farhang, T.K. Oliver, M. Rayson, G. Brent, M. Stockenhuber, and E. Kennedy, Experimental study on the precipitation of magnesite from thermally activated serpentine for CO₂ sequestration, Chem. Eng. J., 303(2016), p. 439. doi: 10.1016/j.cej.2016.06.008
[104]	M. Fabian, M. Shopska, D. Paneva, et al., The influence of attrition milling on carbon dioxide sequestration on magnesium–iron silicate, Miner. Eng., 23(2010), No. 8, p. 616. doi: 10.1016/j.mineng.2010.02.006
[105]	J.J. Li and M. Hitch, Mechanical activation of magnesium silicates for mineral carbonation, a review, Miner. Eng., 128(2018), p. 69. doi: 10.1016/j.mineng.2018.08.034
[106]	W.J.J. Huijgen, G.J. Ruijg, R.N.J. Comans, and G.J. Witkamp, Energy consumption and net CO₂ sequestration of aqueous mineral carbonation, Ind. Eng. Chem. Res., 45(2006), No. 26, p. 9184. doi: 10.1021/ie060636k
[107]	S.J. Gerdemann, W.K. O’Connor, D.C. Dahlin, L.R. Penner, and H. Rush, Ex situ aqueous mineral carbonation, Environ. Sci. Technol., 41(2007), No. 7, p. 2587. doi: 10.1021/es0619253
[108]	E. Eikeland, A.B. Blichfeld, C. Tyrsted, A. Jensen, and B.B. Iversen, Optimized carbonation of magnesium silicate mineral for CO₂ storage, ACS Appl. Mater. Interfaces, 7(2015), No. 9, p. 5258. doi: 10.1021/am508432w
[109]	J.J. Li, A.D. Jacobs, and M. Hitch, Direct aqueous carbonation on olivine at a CO₂ partial pressure of 6.5 MPa, Energy, 173(2019), p. 902. doi: 10.1016/j.energy.2019.02.125
[110]	S. Teir, R. Kuusik, C.J. Fogelholm, and R. Zevenhoven, Production of magnesium carbonates from serpentinite for long-term storage of CO₂, Int. J. Miner. Process., 85(2007), No. 1-3, p. 1. doi: 10.1016/j.minpro.2007.08.007
[111]	G.L.A.A. Ferrufino, S. Okamoto, J.C.D. Santos, et al., CO₂ sequestration by pH-swing mineral carbonation based on HCl/NH₄OH system using iron-rich lizardite 1T, J. CO₂ Util., 24(2018), p. 164. doi: 10.1016/j.jcou.2018.01.001
[112]	X.L. Wang and M.M. Maroto-Valer, Dissolution of serpentine using recyclable ammonium salts for CO₂ mineral carbonation, Fuel, 90(2011), No. 3, p. 1229. doi: 10.1016/j.fuel.2010.10.040
[113]	J. Fagerlund, E. Nduagu, I. Romão, and R. Zevenhoven, CO₂ fixation using magnesium silicate minerals part 1: Process description and performance, Energy, 41(2012), No. 1, p. 184. doi: 10.1016/j.energy.2011.08.032
[114]	W.J. Bao, H.Q. Li, and Y. Zhang, Experimental investigation of enhanced carbonation by solvent extraction for indirect CO₂ mineral sequestration, Greenh. Gases Sci. Technol., 4(2014), No. 6, p. 785. doi: 10.1002/ghg.1440
[115]	F. Goff and K.S. Lackner, Carbon dioxide sequestering using ultramaf IC rocks, Environ. Geosci., 5(1998), No. 3, p. 89. doi: 10.1046/j.1526-0984.1998.08014.x
[116]	H.J. Ziock, D.P. Butt, K.S. Lackner, and C.H. Wendt, The need and options available for permanent CO₂ disposal, [in] M.A. Abraham and R.P. Hesketh, eds., Reaction Engineering for Pollution Prevention, Elsevier, Amsterdam, 2000, p. 41.
[117]	S. Teir, H. Revitzer, S. Eloneva, C.J. Fogelholm, and R. Zevenhoven, Dissolution of natural serpentinite in mineral and organic acids, Int. J. Miner. Process., 83(2007), No. 1-2, p. 36. doi: 10.1016/j.minpro.2007.04.001
[118]	W.K. O’Connor, D.C. Dahlin, D.N. Nilsen, G.E. Rush, R.P. Walters, and P.C. Turner, CO₂ storage in solid form: A study of direct mineral carbonation, [in] 5th International Conference on Greenhouse Gas Technologies, Cairns, 2000, p. 14.
[119]	W.J.J. Huijgen, Carbon Dioxide Sequestration by Mineral Carbonation, Wageningen University and Research, Wageningen, 2007, p. 47.
[120]	B. Metz, O. Davidson, H. de Coninck, M. Loos, and L. Meyer, IPCC Special Report : Carbon Dioxide Capture and Storage, Cambridge University Press, Cambridge, 2005, p. 323.
[121]	J.G. Blencoe, D.A. Palmer, L.M. Anovitz, and J.S. Beard, Carbonation of Metal Silicates for Long-Term CO₂ Sequestration, United States Patent, Appl. 13/361215, 2014.
[122]	E. Nduagu, T. Björklöf, J. Fagerlund, et al., Production of magnesium hydroxide from magnesium silicate for the purpose of CO₂ mineralization – Part 2: Mg extraction modeling and application to different Mg silicate rocks, Miner. Eng., 30(2012), p. 87. doi: 10.1016/j.mineng.2011.12.002
[123]	I.S. Romão, L.M. Gando-Ferreira, and R. Zevenhoven, Combined extraction of metals and production of Mg(OH)₂ for CO₂ sequestration from nickel mine ore and overburden, Miner. Eng., 53(2013), p. 167. doi: 10.1016/j.mineng.2013.08.002
[124]	W. Raza, N. Raza, H. Agbe, R.V. Kumar, K.H. Kim, and J.H. Yang, Multistep sequestration and storage of CO₂ to form valuable products using forsterite, Energy, 155(2018), p. 865. doi: 10.1016/j.energy.2018.05.077