Breaking the Fe<sub>3</sub>O<sub>4</sub>-wrapped copper microstructure to enhance copper–slag separation

Xiaopeng Chi; Haoyu Liu; Jun Xia; Hang Chen; Xiangtao Yu; Wei Weng; Shuiping Zhong

doi:10.1007/s12613-024-2861-4

Volume 31 Issue 10

Oct. 2024

Turn off MathJax

Article Contents

Article Navigation > International Journal of Minerals, Metallurgy and Materials > 2024 > 31(10): 2312-2325

Xiaopeng Chi, Haoyu Liu, Jun Xia, Hang Chen, Xiangtao Yu, Wei Weng, and Shuiping Zhong, Breaking the Fe₃O₄-wrapped copper microstructure to enhance copper–slag separation, Int. J. Miner. Metall. Mater., 31(2024), No. 10, pp. 2312-2325. https://doi.org/10.1007/s12613-024-2861-4

Cite this article as:

Xiaopeng Chi, Haoyu Liu, Jun Xia, Hang Chen, Xiangtao Yu, Wei Weng, and Shuiping Zhong, Breaking the Fe3O4-wrapped copper microstructure to enhance copper–slag separation, Int. J. Miner. Metall. Mater., 31(2024), No. 10, pp. 2312-2325. https://doi.org/10.1007/s12613-024-2861-4

Citation:

PDF( 5741 KB)

Research Article

Breaking the Fe₃O₄-wrapped copper microstructure to enhance copper–slag separation

+ Author Affiliations

Corresponding authors:
Wei Weng E-mail: wengwei198912@163.com

Shuiping Zhong E-mail: zspcsu@163.com
Received: 31 October 2023; Revised: 16 February 2024; Accepted: 22 February 2024; Available online: 23 February 2024

Abstract

Abstract

The precipitation of Fe₃O₄ particles and the accompanied formation of Fe₃O₄-wrapped copper structure are the main obstacles to copper recovery from the molten slag during the pyrometallurgical smelting of copper concentrates. Herein, the commercial powdery pyrite or anthracite is replaced with pyrite–anthracite pellets as the reductants to remove a large amount of Fe₃O₄ particles in the molten slag, resulting in a deep fracture in the Fe₃O₄-wrapped copper microstructure and the full exposure of the copper matte cores. When 1wt% composite pellet is used as the reductant, the copper matte droplets are enlarged greatly from 25 μm to a size observable by the naked eye, with the copper content being enriched remarkably from 1.2wt% to 4.5wt%. Density functional theory calculation results imply that the formation of the Fe₃O₄-wrapped copper structure is due to the preferential adhesion of Cu₂S on the Fe₃O₄ particles. X-ray photoelectron spectroscopy, Fourier transform infrared spectrometer (FTIR), and Raman spectroscopy results all reveal that the high-efficiency conversion of Fe₃O₄ to FeO can decrease the volume fraction of the solid phase and promote the depolymerization of silicate network structure. As a consequence, the settling of copper matte droplets is enhanced due to the lowered slag viscosity, contributing to the high efficiency of copper–slag separation for copper recovery. The results provide new insights into the enhanced in-situ enrichment of copper from molten slag.
- pyrometallurgical smelting process;
- slag cleaning;
- reductants;
- copper matte

FullText(HTML)

Supplements(0)

References(56)

References

[1]	S.Q. Nie, Y. Xin, Q.Y. Wang, et al., Three-dimensional structural Cu₆Sn5/carbon nanotubes alloy thin-film electrodes fabricated by in situ electrodeposition from the leaching solution of waste-printed circuit boards, Int. J. Miner. Metall. Mater., 30(2023), No. 6, p. 1171. doi: 10.1007/s12613-022-2591-4
[2]	X. Li, B.Z. Ma, C.Y. Wang, D. Hu, Y.W. Lü, and Y.Q. Chen, Recycling and recovery of spent copper–indium–gallium–diselenide (CIGS) solar cells: A review, Int. J. Miner. Metall. Mater., 30(2023), No. 6, p. 989. doi: 10.1007/s12613-022-2552-y
[3]	D. Wang, Q. Ma, K.H. Tian, C.Q. Duan, Z.Y. Wang, and Y.G. Liu, Ultrafine nano-scale Cu₂Sb alloy confined in three-dimensional porous carbon as an anode for sodium-ion and potassium-ion batteries, Int. J. Miner. Metall. Mater., 28(2021), No. 10, p. 1666. doi: 10.1007/s12613-021-2286-2
[4]	M. Hao, L.B. Tang, P. Wang, et al., Mapping China’s copper cycle from 1950–2015: Role of international trade and secondary resources, Resour. Conserv. Recycl., 188(2023), art. No. 106700. doi: 10.1016/j.resconrec.2022.106700
[5]	S. Liu, W. Liu, Q.Y. Tan, J.H. Li, W.Q. Qin, and C.R. Yang, The impact of China’s import ban on global copper scrap flow network and the domestic copper sustainability, Resour. Conserv. Recycl., 169(2021), art. No. 105525. doi: 10.1016/j.resconrec.2021.105525
[6]	R. Sridhar, J.M. Toguri, and S. Simeonov, Copper losses and thermodynamic considerations in copper smelting, Metall. Mater. Trans. B, 28(1997), No. 2, p. 191. doi: 10.1007/s11663-997-0084-5
[7]	Q.M. Wang, S.S. Wang, M. Tian, D.X. Tang, Q.H. Tian, and X.Y. Guo, Relationship between copper content of slag and matte in the SKS copper smelting process, Int. J. Miner. Metall. Mater., 26(2019), No. 3, p. 301. doi: 10.1007/s12613-019-1738-4
[8]	Z. Zivkovic, P. Djordjevic, and N. Mitevska, Contribution to the examination of the mechanisms of copper loss with the slag in the process of sulfide concentrates smelting, Min. Metall. Explor., 37(2020), No. 1, p. 267.
[9]	G.R. Qu, Y.G. Wei, B. Li, H. Wang, Y.D. Yang, and A. McLean, Distribution of copper and iron components with hydrogen reduction of copper slag, J. Alloys Compd., 824(2020), art. No. 153910. doi: 10.1016/j.jallcom.2020.153910
[10]	H.P. Zhang, B. Li, A. McLean, Y.G. Wei, H. Wang, and Z.L. Ye, Investigation of reducing copper slag using waste motor oil to recover matte, Metall. Mater. Trans. B, 54(2023), No. 1, p. 178. doi: 10.1007/s11663-022-02678-0
[11]	S.W. Zhou, Y.G. Wei, S.Y. Zhang, et al., Reduction of copper smelting slag using waste cooking oil, J. Cleaner. Prod., 236(2019), art. No. 117668. doi: 10.1016/j.jclepro.2019.117668
[12]	S.W. Zhou, Y.G. Wei, Y. Shi, B. Li, and H. Wang, Characterization and recovery of copper from converter copper slag via smelting separation, Metall. Mater. Trans. B, 49(2018), No. 5, p. 2458. doi: 10.1007/s11663-018-1364-y
[13]	Z.L. Ye, G.P. Dai, B. Zhang, et al., Apparent viscosity evolution of copper converter slag during a reduction process, Min. Metall. Explor., 39(2022), No. 6, p. 2529.
[14]	F. Yuan, Z. Zhao, Y.L. Zhang, and T. Wu, Effect of Al₂O₃ content on the viscosity and structure of CaO–SiO₂–Cr₂O₃–Al₂O₃ slags, Int. J. Miner. Metall. Mater., 29(2022), No. 8, p. 1522. doi: 10.1007/s12613-021-2306-2
[15]	E. De Wilde, I. Bellemans, M. Campforts, et al., Study of the effect of spinel composition on metallic copper losses in slags, J. Sustainable Metall., 3(2017), No. 2, p. 416. doi: 10.1007/s40831-016-0106-0
[16]	J. Isaksson, A. Andersson, T. Vikström, A. Lennartsson, and C. Samuelsson, Improved settling mechanisms of an industrial copper smelting slag by CaO modification, J. Sustainable Metall., 9(2023), No. 3, p. 1378. doi: 10.1007/s40831-023-00733-x
[17]	H.Y. Wang, R. Zhu, K. Dong, S.Q. Zhang, Y. Wang, and X.Y. Lan, Effect of injection of different gases on removal of arsenic in form of dust from molten copper smelting slag prior to recovery process, Trans. Nonferrous Met. Soc. China, 33(2023), No. 4, p. 1258. doi: 10.1016/S1003-6326(23)66180-1
[18]	X. Gao, Z. Chen, J.J. Shi, P. Taskinen, and A. Jokilaakso, Effect of cooling rate and slag modification on the copper matte in smelting slag, Min. Metall. Explor., 37(2020), No. 5, p. 1593.
[19]	A. Sarrafi, B. Rahmati, H.R. Hassani, and H.H.A. Shirazi, Recovery of copper from reverberatory furnace slag by flotation, Miner. Eng., 17(2004), No. 3, p. 457. doi: 10.1016/j.mineng.2003.10.018
[20]	B. Inge, D.W. Evelien, M. Nele, and V. Kim, Metal losses in pyrometallurgical operations: A review, Adv. Colloid Interface Sci., 255(2018), p. 47. doi: 10.1016/j.cis.2017.08.001
[21]	Z.Q. Guo, D.Q. Zhu, J. Pan, F. Zhang, and C.C. Yang, Industrial tests to modify molten copper slag for improvement of copper recovery, JOM, 70(2018), No. 4, p. 533. doi: 10.1007/s11837-017-2671-5
[22]	H.P. Zhang, B. Li, Y.G. Wei, and H. Wang, The settling behavior of matte particles in copper slag and the new technology of copper slag cleaning, J. Mater. Res. Technol., 15(2021), p. 6216. doi: 10.1016/j.jmrt.2021.11.061
[23]	H.H. Zhou, G.J. Liu, L.Q. Zhang, and C.C. Zhou, Mineralogical and morphological factors affecting the separation of copper and arsenic in flash copper smelting slag flotation beneficiation process, J. Hazard. Mater., 401(2021), art. No. 123293. doi: 10.1016/j.jhazmat.2020.123293
[24]	X.S. Guo, Z.Y. Li, J.C. Han, D. Yang, and T.C. Sun, Petroleum coke as reductant in co-reduction of low-grade laterite ore and red mud to prepare ferronickel: Reductant and reduction effects, Int. J. Miner. Metall. Mater., 29(2022), No. 3, p. 455. doi: 10.1007/s12613-021-2389-9
[25]	H.P. Zhang, B. Li, Y.G. Wei, H. Wang, Y.D. Yang, and A. McLean, Reduction of magnetite from copper smelting slag in the presence of a graphite rod, Metall. Mater. Trans. B, 51(2020), No. 6, p. 2663. doi: 10.1007/s11663-020-01963-0
[26]	H.Q. Zhang, G.H. Chen, X. Cai, et al., The leaching behavior of copper and iron recovery from reduction roasting pyrite cinder, J. Hazard. Mater., 420(2021), art. No. 126561. doi: 10.1016/j.jhazmat.2021.126561
[27]	B.J. Zhang, T.A. Zhang, Z.H. Dou, and D.L. Zhang, Effect of vortex stirring on the dilution of copper slag, J. Wuhan Univ. Technol. Mater Sci Ed, 37(2022), No. 4, p. 699. doi: 10.1007/s11595-022-2584-1
[28]	N. Dosmukhamedov, M. Egizekov, E. Zholdasbay, and V. Kaplan, Metal recovery from converter slags using a sulfiding agent, JOM, 70(2018), No. 10, p. 2400. doi: 10.1007/s11837-018-3093-8
[29]	S.W. Zhou, Y.G. Wei, B. Li, and H. Wang, Effect of iron phase evolution on copper separation from slag via coal-based reduction, Metall. Mater. Trans. B, 49(2018), No. 6, p. 3086. doi: 10.1007/s11663-018-1379-4
[30]	B.J. Zhang, T.A. Zhang, L.P. Niu, N.S. Liu, Z.H. Dou, and Z.Q. Li, Moderate dilution of copper slag by natural gas, JOM, 70(2018), No. 1, p. 47. doi: 10.1007/s11837-017-2670-6
[31]	J. Zhang, Y.H. Qi, D.L. Yan, and H.C. Xu, A new technology for copper slag reduction to get molten iron and copper matte, J. Iron Steel Res. Int., 22(2015), No. 5, p. 396. doi: 10.1016/S1006-706X(15)30018-2
[32]	I.P. Plotnikov, A.A. Komkov, and S.V. Bystrov, Behavior of copper and sulfur during high-temperature sulfurization of copper-smelting slags with elemental sulfur, Metallurgist, 67(2023), No. 3, p. 476.
[33]	F. Yin, P. Xing, Q. Li, C.Y. Wang, and Z. Wang, Magnetic separation-sulphuric acid leaching of Cu–Co–Fe matte obtained from copper converter slag for recovering Cu and Co, Hydrometallurgy, 149(2014), p. 189. doi: 10.1016/j.hydromet.2014.08.007
[34]	S. Hughes, Applying ausmelt technology to recover Cu, Ni, and Co from slags, JOM, 52(2000), No. 8, p. 30. doi: 10.1007/s11837-000-0170-5
[35]	J. Isaksson, A. Andersson, A. Lennartsson, and C. Samuelsson, Interactions of crucible materials with an FeO_x–SiO₂–Al₂O₃ melt and their influence on viscosity measurements, Metall. Mater. Trans. B, 54(2023), No. 6, p. 3526. doi: 10.1007/s11663-023-02930-1
[36]	H. Saigo, D.B. Kc, and N. Saito, Einstein–Roscoe regression for the slag viscosity prediction problem in steelmaking, Sci. Rep., 12(2022), No. 1, art. No. 6541. doi: 10.1038/s41598-022-10278-w
[37]	T.S. Kim and J.H. Park, Structure–viscosity relationship of low-silica calcium aluminosilicate melts, ISIJ Int., 54(2014), No. 9, p. 2031. doi: 10.2355/isijinternational.54.2031
[38]	Y. Shi, Y.G. Wei, S.W. Zhou, B. Li, Y.D. Yang, and H. Wang, Effect of B₂O₃ content on the viscosity of copper slag, J. Alloys Compd., 822(2020), art. No. 153478. doi: 10.1016/j.jallcom.2019.153478
[39]	A. Rusen, A. Geveci, Y. Ali Topkaya, and B. Derin, Effects of some additives on copper losses to matte smelting slag, JOM, 68(2016), No. 9, p. 2323. doi: 10.1007/s11837-016-1825-1
[40]	P. Hohenberg and W. Kohn, Inhomogeneous electron gas, Phys. Rev., 136(1964), No. 3B, p. 864. doi: 10.1103/PhysRev.136.B864
[41]	W. Kohn and L.J. Sham, Self-consistent equations including exchange and correlation effects, Phys. Rev., 140(1965), No. 4A, p. A1133. doi: 10.1103/PhysRev.140.A1133
[42]	P.E. Blöchl, Projector augmented-wave method, Phys. Rev. B: Condens. Matter, 50(1994), No. 24, p. 17953. doi: 10.1103/PhysRevB.50.17953
[43]	S.P. Zhong, H.L. Zhu, L. Yang, X.P. Chi, W. Tan, and W. Weng, Activating bulk nickel foam for the electrochemical oxidization of ethanol by anchoring MnO₂@Au nanorods, J. Mater. Chem. A, 11(2023), No. 15, p. 8101. doi: 10.1039/D3TA00367A
[44]	W. Weng, J.X. Xiao, Y.J. Shen, X.X. Liang, T. Lv, and W. Xiao, Molten salt electrochemical modulation of iron–carbon–nitrogen for lithium–sulfur batteries, Angew. Chem. Int. Ed., 60(2021), No. 47, p. 24905. doi: 10.1002/anie.202111707
[45]	J.K. Nørskov, T. Bligaard, A. Logadottir, et al., Trends in the exchange current for hydrogen evolution, J. Electrochem. Soc., 152(2005), art. No. J23. doi: 10.1149/1.1856988
[46]	J.K. Nørskov, J. Rossmeisl, A. Logadottir, et al., Origin of the overpotential for oxygen reduction at a fuel-cell cathode, J. Phys. Chem. B, 108(2004), No. 46, p. 17886. doi: 10.1021/jp047349j
[47]	B. Zhang, J. Liu, J.S. Wang, et al., Interface engineering: The Ni(OH)₂/MoS₂ heterostructure for highly efficient alkaline hydrogen evolution, Nano Energy, 37(2017), p. 74. doi: 10.1016/j.nanoen.2017.05.011
[48]	Y. Ke, N. Peng, K. Xue, et al., Sulfidation behavior and mechanism of zinc silicate roasted with pyrite, Appl. Surf. Sci., 435(2018), p. 1011. doi: 10.1016/j.apsusc.2017.11.202
[49]	K. Wang, Y. Liu, J. Hao, Z.H. Dou, G.Z. Lv, and T.A. Zhang, A novel slag cleaning method to recover copper from molten copper converter slag, Trans. Nonferrous Met. Soc. China, 33(2023), No. 8, p. 2511. doi: 10.1016/S1003-6326(23)66277-6
[50]	H.M. Ferreira, E.B. Lopes, J.F. Malta, et al., Preparation and densification of bulk pyrite, FeS₂, J. Phys. Chem. Solids, 159(2021), art. No. 110296. doi: 10.1016/j.jpcs.2021.110296
[51]	M. Kuosa, B. Ekberg, L. Tanttu, T. Jauhiainen, and A. Häkkinen, Performance comparison of anthracite filter media of different origin in the removal of organic traces from copper electrolyte, Int. J. Miner. Process., 163(2017), p. 24. doi: 10.1016/j.minpro.2017.04.006
[52]	A. Rajan, M. Sharma, and N.K. Sahu, Assessing magnetic and inductive thermal properties of various surfactants functionalised Fe₃O₄ nanoparticles for hyperthermia, Sci. Rep., 10(2020), No. 1, art. No. 15045. doi: 10.1038/s41598-020-71703-6
[53]	R. Jain and S. Gulati, Influence of Fe²⁺ substitution on FTIR and Raman spectra of Mn ferrite nanoparticles, Vib. Spectrosc., 126(2023), art. No. 103540. doi: 10.1016/j.vibspec.2023.103540
[54]	R.L. Zheng, J.F. Lü, W.F. Song, et al., Metallurgical properties of CaO–SiO₂–Al₂O₃–4.6wt%MgO–Fe₂O₃ slag system pertaining to spent automotive catalyst smelting, Int. J. Miner. Metall. Mater., 30(2023), No. 5, p. 886. doi: 10.1007/s12613-022-2569-2
[55]	S.F. Ma, K.J. Li, J.L. Zhang, et al., The effects of CaO and FeO on the structure and properties of aluminosilicate system: A molecular dynamics study, J. Mol. Liq., 325(2021), art. No. 115106. doi: 10.1016/j.molliq.2020.115106
[56]	T. Talapaneni, N. Yedla, S. Pal, and S. Sarkar, Experimental and theoretical studies on the viscosity–structure correlation for high alumina–silicate melts, Metall. Mater. Trans. B, 48(2017), No. 3, p. 1450. doi: 10.1007/s11663-017-0963-3