Investigation and optimization of high-valent Ta-doped SrFeO<sub>3–<i>δ</i></sub> as air electrode for intermediate-temperature solid oxide fuel cells

Shanshan Jiang; Hao Qiu; Shaohua Xu; Xiaomin Xu; Jingjing Jiang; Beibei Xiao; Paulo Sérgio Barros Julião; Chao Su; Daifen Chen; Wei Zhou

doi:10.1007/s12613-024-2872-1

Volume 31 Issue 9

Sep. 2024

Turn off MathJax

Article Contents

Article Navigation > International Journal of Minerals, Metallurgy and Materials > 2024 > 31(9): 2102-2109

Shanshan Jiang, Hao Qiu, Shaohua Xu, Xiaomin Xu, Jingjing Jiang, Beibei Xiao, Paulo Sérgio Barros Julião, Chao Su, Daifen Chen, and Wei Zhou, Investigation and optimization of high-valent Ta-doped SrFeO_3–δ as air electrode for intermediate-temperature solid oxide fuel cells, Int. J. Miner. Metall. Mater., 31(2024), No. 9, pp. 2102-2109. https://doi.org/10.1007/s12613-024-2872-1

Cite this article as:

Shanshan Jiang, Hao Qiu, Shaohua Xu, Xiaomin Xu, Jingjing Jiang, Beibei Xiao, Paulo Sérgio Barros Julião, Chao Su, Daifen Chen, and Wei Zhou, Investigation and optimization of high-valent Ta-doped SrFeO3–δ as air electrode for intermediate-temperature solid oxide fuel cells, Int. J. Miner. Metall. Mater., 31(2024), No. 9, pp. 2102-2109. https://doi.org/10.1007/s12613-024-2872-1

Citation:

PDF( 2106 KB)

Research Article

Investigation and optimization of high-valent Ta-doped SrFeO_3–δ as air electrode for intermediate-temperature solid oxide fuel cells

+ Author Affiliations

Corresponding authors:
Shanshan Jiang E-mail: jss522@just.edu.cn

Chao Su E-mail: chao.su@just.edu.cn
Received: 13 December 2023; Revised: 27 February 2024; Accepted: 5 March 2024; Available online: 7 March 2024

Abstract

Abstract

To explore highly active and thermomechanical stable air electrodes for intermediate-temperature solid oxide fuel cells (IT-SOFCs), 10mol% Ta⁵⁺ doped in the B site of strontium ferrite perovskite oxide (SrTa_0.1Fe_0.9O_3–δ, STF) is investigated and optimized. The effects of Ta⁵⁺ doping on structure, transition metal reduction, oxygen nonstoichiometry, thermal expansion, and electrical performance are evaluated systematically. Via 10mol% Ta⁵⁺ doping, the thermal expansion coefficient (TEC) decreased from 34.1 × 10^–6 (SrFeO_3–δ) to 14.6 × 10^–6 K^–1 (STF), which is near the TEC of electrolyte (13.3 × 10^–6 K^–1 for Sm_0.2Ce_0.8O_1.9, SDC), indicates excellent thermomechanical compatibility. At 550–750°C, STF shows superior oxygen vacancy concentrations (0.262 to 0.331), which is critical in the oxygen-reduction reaction (ORR). Oxygen temperature-programmed desorption (O₂-TPD) indicated the thermal reduction onset temperature of iron ion is around 420°C, which matched well with the inflection points on the thermos-gravimetric analysis and electrical conductivity curves. At 600°C, the STF electrode shows area-specific resistance (ASR) of 0.152 Ω·cm² and peak power density (PPD) of 749 mW·cm^–2. ORR activity of STF was further improved by introducing 30wt% Sm_0.2Ce_0.8O_1.9 (SDC) powder, STF + SDC composite cathode achieving outstanding ASR value of 0.115 Ω·cm² at 600°C, even comparable with benchmark cobalt-containing cathode, Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3–δ (BSCF). Distribution of relaxation time (DRT) analysis revealed that the oxygen surface exchange and bulk diffusion were improved by forming a composite cathode. At 650°C, STF + SDC composite cathode achieving an outstanding PPD of 1117 mW·cm^–2. The excellent results suggest that STF and STF + SDC are promising air electrodes for IT-SOFCs.
- strontium ferrite-based perovskite;
- Ta doping;
- composite cathode;
- intermediate-temperature solid oxide fuel cells

FullText(HTML)

Supplements(0)

References(23)

References

[1]	Y. Zhang, B. Chen, D.Q. Guan, et al., Thermal-expansion offset for high-performance fuel cell cathodes, Nature, 591(2021), p. 246. doi: 10.1038/s41586-021-03264-1
[2]	G.M. Yang, C. Su, H.G. Shi, et al., Toward reducing the operation temperature of solid oxide fuel cells: Our past 15 years of efforts in cathode development, Energy Fuels, 34(2020), No. 12, p. 15169. doi: 10.1021/acs.energyfuels.0c01887
[3]	M. Wang, C. Su, Z.H. Zhu, H. Wang, and L. Ge, Composite cathodes for protonic ceramic fuel cells: Rationales and materials, Composites Part B, 238(2022), art. No. 109881. doi: 10.1016/j.compositesb.2022.109881
[4]	J. Song, Y.Y. Birdja, D. Pant, Z.Y. Chen, and J. Vaes, Recent progress in the structure optimization and development of proton-conducting electrolyte materials for low-temperature solid oxide cells, Int. J. Miner. Metall. Mater., 29(2022), No. 4, p. 848. doi: 10.1007/s12613-022-2447-y
[5]	W.N.A.W. Yusoff, N.A. Baharuddin, M.R. Somalu, A. Muchtar, N.P. Brandon, and H.Q. Fan, Recent advances and influencing parameters in developing electrode materials for symmetrical solid oxide fuel cells, Int. J. Miner. Metall. Mater., 30(2023), No. 10, p. 1933. doi: 10.1007/s12613-023-2694-6
[6]	G.Y. Liu, F.G. Hou, S.L. Peng, X.D. Wang, and B.Z. Fang, Process and challenges of stainless steel based bipolar plates for proton exchange membrane fuel cells, Int. J. Miner. Metall. Mater., 29(2022), No. 5, p. 1099. doi: 10.1007/s12613-022-2485-5
[7]	X. Yang, Z.H. Du, Q. Zhang, et al., Effects of operating conditions on the performance degradation and anode microstructure evolution of anode-supported solid oxide fuel cells, Int. J. Miner. Metall. Mater., 30(2023), No. 6, p. 1181. doi: 10.1007/s12613-023-2616-7
[8]	P. Bhupaijit, C. Kaewsai, T. Suriwong, et al., Effect of Co²⁺ substitution in B-sites of the perovskite system on the phase formation, microstructure, electrical and magnetic properties of Bi_0.5(Na_0.68K_0.22Li_0.10)_0.5TiO₃ ceramics, Int. J. Miner. Metall. Mater., 29(2022), No. 9, p. 1798. doi: 10.1007/s12613-021-2345-8
[9]	J. Yu, Z. Li, T. Liu, et al., Morphology control and electronic tailoring of Co_xA_y (A = P, S, Se) electrocatalysts for water splitting, Chem. Eng. J., 460(2023), art. No. 141674. doi: 10.1016/j.cej.2023.141674
[10]	J.X. Pan, Y.J. Ye, M.Z. Zhou, et al., Improving the activity and stability of Ni-based electrodes for solid oxide cells through surface engineering: Recent progress and future perspectives, Mater. Rep. Energy, 1(2021), No. 2, art. No. 100025.
[11]	F.L. Liang, W. Zhou, and Z.H. Zhu, A highly stable and active hybrid cathode for low-temperature solid oxide fuel cells, ChemElectroChem, 1(2014), No. 10, p. 1627. doi: 10.1002/celc.201402143
[12]	S.Y. Li, Z. Lü, B. Wei, et al., A study of (Ba_0.5Sr_0.5)_{1− x} Sm_xCo_0.8Fe_0.2O_{3− δ} as a cathode material for IT-SOFCs, J. Alloys Compd., 426(2006), No. 1-2, p. 408. doi: 10.1016/j.jallcom.2006.02.040
[13]	S. Park, S. Choi, J. Shin, and G. Kim, Tradeoff optimization of electrochemical performance and thermal expansion for Co-based cathode material for intermediate-temperature solid oxide fuel cells, Electrochim. Acta, 125(2014), p. 683. doi: 10.1016/j.electacta.2014.01.112
[14]	Q. Huang, S.S. Jiang, Y.J. Wang, et al., Highly active and durable triple conducting composite air electrode for low-temperature protonic ceramic fuel cells, Nano Res., 16(2023), No. 7, p. 9280. doi: 10.1007/s12274-023-5531-3
[15]	A. Wedig, R. Merkle, B. Stuhlhofer, H.U. Habermeier, J. Maier, and E. Heifets, Fast oxygen exchange kinetics of pore-free Bi_{1− x}Sr_xFeO_{3− δ} thin films, Phys. Chem. Chem. Phys., 13(2011), No. 37, p. 16530. doi: 10.1039/c1cp21684h
[16]	S.S. Jiang, J. Sunarso, W. Zhou, J. Shen, R. Ran, and Z.P. Shao, Cobalt-free SrNb_xFe_{1− x}O_{3− δ} (x = 0.05, 0.1 and 0.2) perovskite cathodes for intermediate temperature solid oxide fuel cells, J. Power Sources, 298(2015), p. 209. doi: 10.1016/j.jpowsour.2015.08.063
[17]	Y.C. Zhou, X. Meng, X.J. Liu, et al., Novel architectured metal-supported solid oxide fuel cells with Mo-doped SrFeO_{3− δ} electrocatalysts, J. Power Sources, 267(2014), p. 148. doi: 10.1016/j.jpowsour.2014.04.157
[18]	J.H. Piao, K.N. Sun, N.Q. Zhang, X.B. Chen, S. Xu, and D.R. Zhou, Preparation and characterization of Pr_{1− x}Sr_xFeO₃ cathode material for intermediate temperature solid oxide fuel cells, J. Power Sources, 172(2007), No. 2, p. 633. doi: 10.1016/j.jpowsour.2007.05.023
[19]	Y.F. Song, Y.B. Chen, M.G. Xu, et al., A cobalt-free multi-phase nanocomposite as near-ideal cathode of intermediate-temperature solid oxide fuel cells developed by smart self-assembly, Adv. Mater., 32(2020), No. 8, art. No. e1906979. doi: 10.1002/adma.201906979
[20]	H.G. Shi, C. Su, X.M. Xu, et al., Building Ruddlesden-Popper and single perovskite nanocomposites: A new strategy to develop high-performance cathode for protonic ceramic fuel cells, Small, 17(2021), No. 35, art. No. e2101872. doi: 10.1002/smll.202101872
[21]	F.L. Liang, Z.X. Wang, Z.R. Wang, J.K. Mao, and J. Sunarso, Electrochemical performance of cobalt-free Nb and Ta co-doped perovskite cathodes for intermediate-temperature solid oxide fuel cells, ChemElectroChem, 4(2017), No. 9, p. 2366. doi: 10.1002/celc.201700236
[22]	D.M. Huan, L. Zhang, K. Zhu, et al., Oxygen vacancy-engineered cobalt-free Ruddlesden-Popper cathode with excellent CO₂ tolerance for solid oxide fuel cells, J. Power Sources, 497(2021), art. No. 229872. doi: 10.1016/j.jpowsour.2021.229872
[23]	T.H. Wan, M. Saccoccio, C. Chen, and F. Ciucci, Influence of the discretization methods on the distribution of relaxation times deconvolution: Implementing radial basis functions with DRT tools, Electrochim. Acta, 184(2015), p. 483. doi: 10.1016/j.electacta.2015.09.097