Feng Chen, Yanruo Hong, Jialin Sun, and Jinglong Bu, Preparation and characterization of calcium aluminate by chemical synthesis, J. Univ. Sci. Technol. Beijing, 13(2006), No. 1, pp. 82-86. https://doi.org/10.1016/S1005-8850(06)60019-4
Cite this article as:
Feng Chen, Yanruo Hong, Jialin Sun, and Jinglong Bu, Preparation and characterization of calcium aluminate by chemical synthesis, J. Univ. Sci. Technol. Beijing, 13(2006), No. 1, pp. 82-86. https://doi.org/10.1016/S1005-8850(06)60019-4
Feng Chen, Yanruo Hong, Jialin Sun, and Jinglong Bu, Preparation and characterization of calcium aluminate by chemical synthesis, J. Univ. Sci. Technol. Beijing, 13(2006), No. 1, pp. 82-86. https://doi.org/10.1016/S1005-8850(06)60019-4
Citation:
Feng Chen, Yanruo Hong, Jialin Sun, and Jinglong Bu, Preparation and characterization of calcium aluminate by chemical synthesis, J. Univ. Sci. Technol. Beijing, 13(2006), No. 1, pp. 82-86. https://doi.org/10.1016/S1005-8850(06)60019-4
Saturated Ca(OH)2 and AlCl3 solutions were used to synthesize calcium aluminate hydrate precipitates at room temperature; high purity calcium aluminate powders with stable phases were made by calcination of the precursors at a temperature as low as 1100℃. PSD and BET analysis revealed the particles with sizes ranging from submicrometer to several micrometers and with a specific area of 13 nr/g. The measurement of hydraulic exotherm revealed that the exothermal rate is in peak for about 2 h. The exothermal quantities are 449.24 J/g at 12 h and 488.38 J/g at 24 h. Its strength development is quick and the 1 day curing strength is almost equal to 100% of the 3 days curing strength in the mortar test.
Search
DownLoad: