Morphology and microstructure characterization of 95W-3.5Ni-1.5Fe powder prepared by mechanical alloying

The mechanism of mechanical solid-state reactions for formation of tungsten heavy alloy powder was discussed. A high-energy ball mill operating at room temperature was used for preparing tungsten heavy alloy powders,starting from elemental tungsten (W),nickel (Ni),and iron (Fe) powders. X-ray diffraction (XRD),particle size analyzer,scanning electron microscopy (SEM),and transmission electron microscopy (TEM) were used to follow the progress of the mechanical solid-state reaction of W,Ni,and Fe pow-ders. These morphological studies revealed three stages in the milling process. In the first stage,the particle deformation changes the irregular structure of the as-received powder particles to flattened morphology,and the average particle size increases. In the second stage,the powder is sufficiently deformed and the tendency to fracture predominates over welding,and the particle size decreases. With continuous milling,the system reaches steady state,and relatively small and uniform particle size distribution is obtained after 20 h of milling.