Pingfeng Fu and Qiang Zhang, Investigation on steelmaking dust recycling and iron oxide red preparing, J. Univ. Sci. Technol. Beijing, 15(2008), No. 1, pp. 24-28. https://doi.org/10.1016/S1005-8850(08)60005-5
Cite this article as:
Pingfeng Fu and Qiang Zhang, Investigation on steelmaking dust recycling and iron oxide red preparing, J. Univ. Sci. Technol. Beijing, 15(2008), No. 1, pp. 24-28. https://doi.org/10.1016/S1005-8850(08)60005-5
Pingfeng Fu and Qiang Zhang, Investigation on steelmaking dust recycling and iron oxide red preparing, J. Univ. Sci. Technol. Beijing, 15(2008), No. 1, pp. 24-28. https://doi.org/10.1016/S1005-8850(08)60005-5
Citation:
Pingfeng Fu and Qiang Zhang, Investigation on steelmaking dust recycling and iron oxide red preparing, J. Univ. Sci. Technol. Beijing, 15(2008), No. 1, pp. 24-28. https://doi.org/10.1016/S1005-8850(08)60005-5
To investigate the physical and chemical properties of the steelmaking dust, wet sieve separation, XRD, SEM, EDS, and traditional chemical analysis were carded out to obtain the particle size distribution, mineralogy, morphology, and the chemical composition of the dust. The dust with a total Fe content of 64.08wt% has coarse metallic iron, magnetite and hematite grains, while free clay minerals with a size of 〈38 μm are mainly iosidefite, calcium silicate, and calcite, which are conglomerated to each other. By following the procedures of wet magnetic separation, acid leaching, and oxidization calcination, magnetic materials were recycled and further prepared as iron oxide red with a productivity of 0.54 ton per unit ton of the dust. Middle iron concentrate with an Fe content of 65.92wt% can be reused as feeding material in the ironmaking industry. Additionally, washed water from acid leaching with an Fe3+ ion content of less than 5 g·L-1 was recovered as feeding water in the wet magnetic separation procedure.