Baihe Miao, Jianping He, and Donglang Shao, Microstructural Characteristics of CuCr50 Alloy by Laser Refining, J. Univ. Sci. Technol. Beijing, 5(1998), No. 3, pp. 156-159.
Cite this article as:
Baihe Miao, Jianping He, and Donglang Shao, Microstructural Characteristics of CuCr50 Alloy by Laser Refining, J. Univ. Sci. Technol. Beijing, 5(1998), No. 3, pp. 156-159.
Baihe Miao, Jianping He, and Donglang Shao, Microstructural Characteristics of CuCr50 Alloy by Laser Refining, J. Univ. Sci. Technol. Beijing, 5(1998), No. 3, pp. 156-159.
Citation:
Baihe Miao, Jianping He, and Donglang Shao, Microstructural Characteristics of CuCr50 Alloy by Laser Refining, J. Univ. Sci. Technol. Beijing, 5(1998), No. 3, pp. 156-159.
An investigation concerning the microstructural characterization of CuCr50 alloy layer by laser surface refining on the powder metallurgy substrate was carried out Significant refined proeutectic chromium crystals distributed in an Cr-rich eutectic and high mutual solubility of Cu and Cr elements in the CuCr50 alloy were examined by Backscattered Electron Imaging (BEI) and Energy Dispersive X-ray Spectrum (EDS) techniques. The results show that surface refining and alloying by high-power laser have a great potential to develop new and high performance alloys in the immiscible and limited solubility systems like Cu-Cr and other similar alloy systems.