[1] | Seyed Esmaiel Shakib, Ramin Raiszadeh, Jalil Vahdati-Khaki. A Self-propagating high-temperature synthesis process for the fabrication of Fe(Cr)-Al2O3 nanocomposite[J]. International Journal of Minerals, Metallurgy and Materials, 2019, 26(6): 775-786. doi: 10.1007/s12613-019-1779-8 |
[2] | Zi-qiang Pi, Xin Lu, Yuan Wu, Lu-ning Wang, Cheng-chang Jia, Xuan-hui Qu, Wei Zheng, Li-zhi Wu, Qing-li Shao. Simulation of jet-flow solid fraction during spray forming[J]. International Journal of Minerals, Metallurgy and Materials, 2017, 24(6): 657-669. doi: 10.1007/s12613-017-1448-8 |
[3] | Dipak Kumar, K. N. Pandey, Dipak Kumar Das. Microstructure studies of air-plasma-spray-deposited CoNiCrAlY coatings before and after thermal cyclic loading for high-temperature application[J]. International Journal of Minerals, Metallurgy and Materials, 2016, 23(8): 934-942. doi: 10.1007/s12613-016-1309-x |
[4] | Jian-jun Wang, Jun-jie Hao, Zhi-meng Guo, Song Wang. Plasma preparation and low-temperature sintering of spherical TiC–Fe composite powder[J]. International Journal of Minerals, Metallurgy and Materials, 2015, 22(12): 1328-1333. doi: 10.1007/s12613-015-1201-0 |
[5] | Hang Zhao, Jian-jun Li, Zhi-zhen Zheng, Ai-hua Wang, Qi-wen Huang, Da-wen Zeng. Microstructure and high-temperature wear properties of in situ TiC composite coatings by plasma transferred arc surface alloying on gray cast iron[J]. International Journal of Minerals, Metallurgy and Materials, 2015, 22(12): 1273-1282. doi: 10.1007/s12613-015-1195-7 |
[6] | Pan Yi, Kui Xiao, Kang-kang Ding, Xu Wang, Li-dan Yan, Cheng-liang Mao, Chao-fang Dong, Xiao-gang Li. Electrochemical corrosion failure mechanism of M152 steel under a salt-spray environment[J]. International Journal of Minerals, Metallurgy and Materials, 2015, 22(11): 1183-1189. doi: 10.1007/s12613-015-1183-y |
[7] | Aruna Tomar, Rashmi Mittal, Devendra Singh. Strength and elongation of spray formed Al-Si-Pb alloys[J]. International Journal of Minerals, Metallurgy and Materials, 2014, 21(12): 1222-1227. doi: 10.1007/s12613-014-1030-6 |
[8] | U. Alver, H. Yaykaşlı, S. Kerli, A. Tanrıverdi. Synthesis and characterization of boron-doped NiO thin films produced by spray pyrolysis[J]. International Journal of Minerals, Metallurgy and Materials, 2013, 20(11): 1097-1101. doi: 10.1007/s12613-013-0839-8 |
[9] | Xu-dong Cheng, Jie Min, Zhen-qi Zhu, Wei-ping Ye. Preparation of high emissivity NiCr2O4 powders with a spinel structure by spray drying[J]. International Journal of Minerals, Metallurgy and Materials, 2012, 19(2): 173-178. doi: 10.1007/s12613-012-0534-1 |
[10] | Yu-ying Liu, Jean-michel Most, Philipp Bauer, Alain Claverie. Reaction zone characterization of counter-flow diffusion flame with diluted and preheated reactants[J]. International Journal of Minerals, Metallurgy and Materials, 2009, 16(3): 278-284. doi: 10.1016/S1674-4799(09)60050-9 |
[11] | Guoqing Xiao, Feng Duan, Gang Zhang, Quncheng Fan. Dissolution-precipitation mechanism of self-propagating high-temperature synthesis of TiC-Cu cermets[J]. International Journal of Minerals, Metallurgy and Materials, 2007, 14(6): 568-572. doi: 10.1016/S1005-8850(07)60130-3 |
[12] | Junhong Chen, Xueda Wang, Jialin Sun, Huasheng Zhan, Wen Song. Research on the Fe-silicon nitride material self-producing N2 at high temperature[J]. International Journal of Minerals, Metallurgy and Materials, 2006, 13(1): 78-81. doi: 10.1016/S1005-8850(06)60018-2 |
[13] | Ruizhu Zhang, junjie Hao, Zhimeng Guo. Synthesis of SrTiO3 for immobilization of simulated HLW by SHS[J]. International Journal of Minerals, Metallurgy and Materials, 2005, 12(4): 357-359. |
[14] | Huimin Liu, Hua Cui, Bin Yang, Jishan Zhang. Isothermal grain growth of reactive spray formed 7075 alloys in semi-solid state[J]. International Journal of Minerals, Metallurgy and Materials, 2004, 11(5): 411-414. |
[15] | Qitang Li, Guozeng Yang, Jianguo Zhang. Numerical calculation of temperature and phase change during the process of atomizing spray quenching on drilling pipe[J]. International Journal of Minerals, Metallurgy and Materials, 2003, 10(2): 60-64. |
[16] | Feng Wang, Bin Yang, Hua Cui, Xianjin Duan, Jishan Zhang. Microstructure and mechanical propertiesof spray-deposited Al-Si-Fe-Cu-Mg alloy containing Mn[J]. International Journal of Minerals, Metallurgy and Materials, 2003, 10(1): 30-34. |
[17] | LI Jianqiang. Determination of CaO in Baotou Columbite and Steel Cinder with Flame Atomic Absorption Spectrometry[J]. International Journal of Minerals, Metallurgy and Materials, 1997, 4(2): 62-62. |
[18] | ZHANG Liying, TIAN Haige, HUANG Thuo, WU Chengyi. A new composite: spray-deposited M2 high speed steel reinforced by WC particles[J]. International Journal of Minerals, Metallurgy and Materials, 1997, 4(3): 14-17. |
[19] | ZHANG Wing, HUANG Thuo, TIAN Haige, WU Qinghua, WU Chengyi. High Speed Steel and WC Particle-Reinforced Composites Produce by Spray Forming[J]. International Journal of Minerals, Metallurgy and Materials, 1997, 4(4): 47-51. |
[20] | YIN Sheng, TANG Qing, GUO Zhi-meng, GUO Shi-ju, LAI He-yi. Dense Al2O3-TiC Ceramics Made by Self-propagating High-Temperature Synthesis[J]. International Journal of Minerals, Metallurgy and Materials, 1994, 1(1-2): 15-21. |