ZHENG Chun and GU Tong, Temperature distribution in the tool-chip-workpiece system during the orthogonal cutting process, J. Univ. Sci. Technol. Beijing, 4(1997), No. 3, pp. 30-34.
Cite this article as:
ZHENG Chun and GU Tong, Temperature distribution in the tool-chip-workpiece system during the orthogonal cutting process, J. Univ. Sci. Technol. Beijing, 4(1997), No. 3, pp. 30-34.
ZHENG Chun and GU Tong, Temperature distribution in the tool-chip-workpiece system during the orthogonal cutting process, J. Univ. Sci. Technol. Beijing, 4(1997), No. 3, pp. 30-34.
Citation:
ZHENG Chun and GU Tong, Temperature distribution in the tool-chip-workpiece system during the orthogonal cutting process, J. Univ. Sci. Technol. Beijing, 4(1997), No. 3, pp. 30-34.
The temperature distribution in the tool, chip and workpiece was studied during the orthogonal cutting process Under several different cutting conditions. The temperature distribution is calculated by the finite difference method. and the variation of the material properties with temperature was taken was taken into account The results obtained are coincident with both previous published results and experimental measurements.
Search
DownLoad: