Chengchang Jia, Jianxin Chu, and Qingshan Zhao, A Research on the Joining of SiC Composite to 40 Cr Steel, J. Univ. Sci. Technol. Beijing, 8(2001), No. 4, pp. 280-282.
Cite this article as:
Chengchang Jia, Jianxin Chu, and Qingshan Zhao, A Research on the Joining of SiC Composite to 40 Cr Steel, J. Univ. Sci. Technol. Beijing, 8(2001), No. 4, pp. 280-282.
Chengchang Jia, Jianxin Chu, and Qingshan Zhao, A Research on the Joining of SiC Composite to 40 Cr Steel, J. Univ. Sci. Technol. Beijing, 8(2001), No. 4, pp. 280-282.
Citation:
Chengchang Jia, Jianxin Chu, and Qingshan Zhao, A Research on the Joining of SiC Composite to 40 Cr Steel, J. Univ. Sci. Technol. Beijing, 8(2001), No. 4, pp. 280-282.
SiC composites and 40 Cr Steels were joined with Ag-Cu-Ti solder in order to develop a new method of joining ceramics to metal. Effects of solder component and process parameters on the joining strength were investigated. The results show that some chemical reactions occur on the jointing interface between ceramics and metal. Higher joining strength is achieved when titanium is 0.2% (mass fraction) in the solder. The thickness of solder also affects the joining characteristics, and 0.2-0.3 mm thickness of solder is the most suitable.
Search
DownLoad: