SearchHigh Strength Alloy (2020–2024)
-
Microstructure and mechanical properties of new Mg–Zn–Y–Zr alloys with high castability and ignition resistance
2024, vol. 31, no. 12, pp. 2714-2726. doi: 10.1007/s12613-024-2980-y
-
Review on the design of high-strength and hydrogen-embrittlement-resistant steels
2024, vol. 31, no. 7, pp. 1572-1589. doi: 10.1007/s12613-024-2900-1
-
Instrumented oscillographic study on impact toughness of an axle steel DZ2 with different tempering temperatures
2024, vol. 31, no. 7, pp. 1590-1598. doi: 10.1007/s12613-024-2908-6
-
Flow characteristics and hot workability of a typical low-alloy high-strength steel during multi-pass deformation
2024, vol. 31, no. 2, pp. 323-336. doi: 10.1007/s12613-023-2736-0
-
Effect of crystallographic orientation on crack growth behaviour of HSLA steel
2022, vol. 29, no. 8, pp. 1532-1542. doi: 10.1007/s12613-022-2415-6
-
Low-cost and high-strength Mg−Al−Ca−Zn−Mn wrought alloy with balanced ductility
2022, vol. 29, no. 7, pp. 1396-1405. doi: 10.1007/s12613-021-2395-y
-
Stress corrosion cracking behavior of high-strength mooring-chain steel in the SO2-polluted coastal atmosphere
2022, vol. 29, no. 6, pp. 1186-1196. doi: 10.1007/s12613-020-2192-z
-
Titanium microalloying of steel: A review of its effects on processing, microstructure and mechanical properties
2022, vol. 29, no. 4, pp. 645-661. doi: 10.1007/s12613-021-2399-7
-
Improvement of the microstructural features and mechanical properties of advanced high-strength steel DP590 welds
2021, vol. 28, no. 6, pp. 1022-1029. doi: 10.1007/s12613-020-2117-x
-
Effect of microstructure on corrosion behavior of high strength martensite steel—A literature review
2021, vol. 28, no. 5, pp. 754-773. doi: 10.1007/s12613-020-2242-6
-
Determining role of heterogeneous microstructure in lowering yield ratio and enhancing impact toughness in high-strength low-alloy steel
2021, vol. 28, no. 5, pp. 816-825. doi: 10.1007/s12613-020-2235-5
-
In-depth analysis of the fatigue mechanism induced by inclusions for high-strength bearing steels
2021, vol. 28, no. 5, pp. 826-834. doi: 10.1007/s12613-020-2223-9
-
Stress-state dependence of dynamic strain aging: Thermal hardening and blue brittleness
2021, vol. 28, no. 5, pp. 854-866. doi: 10.1007/s12613-021-2250-1
-
Effect of in-situ nanoparticles on the mechanical properties and hydrogen embrittlement of high-strength steel
2021, vol. 28, no. 4, pp. 644-656. doi: 10.1007/s12613-020-2157-2
-
Effect of nonmetallic inclusions on localized corrosion of spring steel
2021, vol. 28, no. 3, pp. 390-397. doi: 10.1007/s12613-020-2018-z
-
Effect of nanosized NbC precipitates on hydrogen-induced cracking of high-strength low-alloy steel
2021, vol. 28, no. 2, pp. 249-256. doi: 10.1007/s12613-020-2167-0
-
Microstructure and mechanical properties of ultralow carbon high-strength steel weld metals with or without Cu−Nb addition
2021, vol. 28, no. 1, pp. 120-130. doi: 10.1007/s12613-020-2159-0
-
Kinetic analysis of austenite transformation for B1500HS high-strength steel during continuous heating
2020, vol. 27, no. 11, pp. 1508-1516. doi: 10.1007/s12613-020-1979-2
-
Effect of large load on the wear and corrosion behavior of high-strength EH47 hull steel in 3.5wt% NaCl solution with sand
2020, vol. 27, no. 11, pp. 1525-1535. doi: 10.1007/s12613-020-1978-3
-
Microstructure and mechanical properties of high-strength low alloy steel by wire and arc additive manufacturing
2020, vol. 27, no. 7, pp. 933-942. doi: 10.1007/s12613-019-1919-1
-
Ultrasonic vibration assisted tungsten inert gas welding of dissimilar metals 316L and L415
2020, vol. 27, no. 7, pp. 943-953. doi: 10.1007/s12613-019-1960-0
Submit Manuscript
E-mail alert
RSS
