SearchSteel (2020–2024)
-
Effects of heating temperature and atmosphere on element distribution and microstructure in high-Mn/Al austenitic low-density steel
2024, vol. 31, no. 12, pp. 2670-2680. doi: 10.1007/s12613-024-2867-y
-
Electromagnetic responses on microstructures of duplex stainless steels based on 3D cellular and electromagnetic sensor finite element models
2024, vol. 31, no. 12, pp. 2681-2691. doi: 10.1007/s12613-024-2894-8
-
Unveiling the cellular microstructure–property relations in martensitic stainless steel via laser powder bed fusion
2024, vol. 31, no. 11, pp. 2476-2487. doi: 10.1007/s12613-024-2947-z
-
Interplay between temperature-dependent strengthening mechanisms and mechanical stability in high-performance austenitic stainless steels
2024, vol. 31, no. 10, pp. 2182-2188. doi: 10.1007/s12613-024-2919-3
-
Temperature-jump tensile tests to induce optimized TRIP/TWIP effect in a metastable austenitic stainless steel
2024, vol. 31, no. 9, pp. 2025-2036. doi: 10.1007/s12613-024-2852-5
-
Improving mechanical properties and high-temperature oxidation of press hardened steel by adding Cr and Si
2024, vol. 31, no. 8, pp. 1865-1875. doi: 10.1007/s12613-023-2796-1
-
Development in oxide metallurgy for improving the weldability of high-strength low-alloy steel—Combined deoxidizers and microalloying elements
2024, vol. 31, no. 6, pp. 1263-1284. doi: 10.1007/s12613-023-2754-y
-
Review on the plastic instability of medium-Mn steels for identifying the formation mechanisms of Lüders and Portevin–Le Chatelier bands
2024, vol. 31, no. 6, pp. 1285-1297. doi: 10.1007/s12613-023-2751-1
-
Recent progress in visualization and digitization of coherent transformation structures and application in high-strength steel
2024, vol. 31, no. 6, pp. 1298-1310. doi: 10.1007/s12613-023-2781-8
-
Stress-assisted corrosion mechanism of 3Ni steel by using gradient boosting decision tree machining learning method
2024, vol. 31, no. 6, pp. 1311-1321. doi: 10.1007/s12613-023-2661-2
-
Effect of deformation parameters on the austenite dynamic recrystallization behavior of a eutectoid pearlite rail steel
2024, vol. 31, no. 5, pp. 833-841. doi: 10.1007/s12613-023-2805-4
-
Description of martensitic transformation kinetics in Fe–C–X (X = Ni, Cr, Mn, Si) system by a modified model
2024, vol. 31, no. 5, pp. 1026-1036. doi: 10.1007/s12613-023-2780-9
-
Flow characteristics and hot workability of a typical low-alloy high-strength steel during multi-pass deformation
2024, vol. 31, no. 2, pp. 323-336. doi: 10.1007/s12613-023-2736-0
-
Prediction model for corrosion rate of low-alloy steels under atmospheric conditions using machine learning algorithms
2024, vol. 31, no. 2, pp. 337-350. doi: 10.1007/s12613-023-2679-5
-
High throughput screening of localised and general corrosion in type 2205 duplex stainless steel at ambient temperature
2023, vol. 30, no. 12, pp. 2375-2385. doi: 10.1007/s12613-023-2651-4
-
Processing map and dynamic recrystallization behaviours of 316LN-Mn austenitic stainless steel
2023, vol. 30, no. 12, pp. 2386-2396. doi: 10.1007/s12613-023-2714-6
-
Recent research progress on the phase-field model of microstructural evolution during metal solidification
2023, vol. 30, no. 11, pp. 2095-2111. doi: 10.1007/s12613-023-2710-x
-
Effect of traveling-wave magnetic field on dendrite growth of high-strength steel slab: Industrial trials and numerical simulation
2023, vol. 30, no. 9, pp. 1716-1728. doi: 10.1007/s12613-023-2629-2
-
Influence of band microstructure on carbide precipitation behavior and toughness of 1 GPa-grade ultra-heavy gauge low-alloy steel
2023, vol. 30, no. 7, pp. 1329-1337. doi: 10.1007/s12613-023-2597-6
-
Advances in machine learning- and artificial intelligence-assisted material design of steels
2023, vol. 30, no. 6, pp. 1003-1024. doi: 10.1007/s12613-022-2595-0
-
Effect of NiO–NiCr2O4 nano-oxides on the microstructural, mechanical and corrosion properties of Ni-coated carbon steel
2023, vol. 30, no. 6, pp. 1078-1092. doi: 10.1007/s12613-022-2584-3
-
Achieving oxidation protection effect for strips hot rolling via Al2O3 nanofluid lubrication
2023, vol. 30, no. 5, pp. 908-916. doi: 10.1007/s12613-022-2493-5
-
Effect of ball milling time on the microstructure and compressive properties of the Fe–Mn–Al porous steel
2023, vol. 30, no. 5, pp. 917-929. doi: 10.1007/s12613-022-2568-3
-
Hot deformation behavior of Fe–27.34Mn–8.63Al–1.03C lightweight steel
2023, vol. 30, no. 4, pp. 734-743. doi: 10.1007/s12613-022-2531-3
-
Influence of rare earth Ce on hot deformation behavior of as-cast Mn18Cr18N high nitrogen austenitic stainless steel
2023, vol. 30, no. 2, pp. 324-334. doi: 10.1007/s12613-021-2355-6
-
Atmospheric corrosion behavior of Nb- and Sb-added weathering steels exposed to the South China Sea
2022, vol. 29, no. 11, pp. 2041-2052. doi: 10.1007/s12613-021-2383-2
-
Quantitative micro-electrochemical study of duplex stainless steel 2205 in 3.5wt% NaCl solution
2022, vol. 29, no. 11, pp. 2053-2063. doi: 10.1007/s12613-021-2291-5
-
Microstructure and texture evolution of nonoriented silicon steel during the punching process
2022, vol. 29, no. 11, pp. 2064-2071. doi: 10.1007/s12613-021-2404-1
-
Enhancing the formability of FeSi6.5 steel by the anodic polarization
2022, vol. 29, no. 11, pp. 2072-2078. doi: 10.1007/s12613-021-2356-5
-
Effect of crystallographic orientation on crack growth behaviour of HSLA steel
2022, vol. 29, no. 8, pp. 1532-1542. doi: 10.1007/s12613-022-2415-6
-
Stress corrosion cracking behavior of high-strength mooring-chain steel in the SO2-polluted coastal atmosphere
2022, vol. 29, no. 6, pp. 1186-1196. doi: 10.1007/s12613-020-2192-z
-
Titanium microalloying of steel: A review of its effects on processing, microstructure and mechanical properties
2022, vol. 29, no. 4, pp. 645-661. doi: 10.1007/s12613-021-2399-7
-
Evaluating data-driven algorithms for predicting mechanical properties with small datasets: A case study on gear steel hardenability
2022, vol. 29, no. 4, pp. 836-847. doi: 10.1007/s12613-022-2437-0
-
Microstructure and phase elemental distribution in high-boron multi-component cast irons
2022, vol. 29, no. 1, pp. 78-87. doi: 10.1007/s12613-020-2135-8
-
Strain hardening behavior, strain rate sensitivity and hot deformation maps of AISI 321 austenitic stainless steel
2021, vol. 28, no. 11, pp. 1799-1810. doi: 10.1007/s12613-020-2163-4
-
Consideration of green intelligent steel processes and narrow window stability control technology on steel quality
2021, vol. 28, no. 8, pp. 1264-1273. doi: 10.1007/s12613-020-2246-2
-
Prediction of the Charpy V-notch impact energy of low carbon steel using a shallow neural network and deep learning
2021, vol. 28, no. 8, pp. 1309-1320. doi: 10.1007/s12613-020-2168-z
-
Intelligent logistics system of steel bar warehouse based on ubiquitous information
2021, vol. 28, no. 8, pp. 1367-1377. doi: 10.1007/s12613-021-2325-z
-
Sliding wear behaviour of Fe/316L/430–Ti(C,N) composites prepared via spark plasma sintering and subsequent heat treatment
2021, vol. 28, no. 7, pp. 1215-1223. doi: 10.1007/s12613-020-2108-y
-
Effects of chromium on the microstructure and hot ductility of Nb-microalloyed steel
2021, vol. 28, no. 6, pp. 1011-1021. doi: 10.1007/s12613-020-2092-2
-
Improvement of the microstructural features and mechanical properties of advanced high-strength steel DP590 welds
2021, vol. 28, no. 6, pp. 1022-1029. doi: 10.1007/s12613-020-2117-x
-
Medium-Mn steels for hot forming application in the automotive industry
2021, vol. 28, no. 5, pp. 741-753. doi: 10.1007/s12613-020-2179-9
-
Effect of microstructure on corrosion behavior of high strength martensite steel—A literature review
2021, vol. 28, no. 5, pp. 754-773. doi: 10.1007/s12613-020-2242-6
-
New insights into the properties of high-manganese steel
2021, vol. 28, no. 5, pp. 782-796. doi: 10.1007/s12613-020-2166-1
-
Ultrahigh cycle fatigue fracture mechanism of high-quality bearing steel obtained through different deoxidation methods
2021, vol. 28, no. 5, pp. 804-815. doi: 10.1007/s12613-021-2253-y
-
Determining role of heterogeneous microstructure in lowering yield ratio and enhancing impact toughness in high-strength low-alloy steel
2021, vol. 28, no. 5, pp. 816-825. doi: 10.1007/s12613-020-2235-5
-
In-depth analysis of the fatigue mechanism induced by inclusions for high-strength bearing steels
2021, vol. 28, no. 5, pp. 826-834. doi: 10.1007/s12613-020-2223-9
-
Hydrogen effect on the mechanical behaviour and microstructural features of a Fe–Mn–C twinning induced plasticity steel
2021, vol. 28, no. 5, pp. 835-846. doi: 10.1007/s12613-021-2284-4
-
Multiphase-field simulation of austenite reversion in medium-Mn steels
2021, vol. 28, no. 5, pp. 847-853. doi: 10.1007/s12613-021-2282-6
-
Stress-state dependence of dynamic strain aging: Thermal hardening and blue brittleness
2021, vol. 28, no. 5, pp. 854-866. doi: 10.1007/s12613-021-2250-1
-
Influence of sample preparation on nanoindentation results of twinning-induced plasticity steel
2021, vol. 28, no. 5, pp. 877-887. doi: 10.1007/s12613-021-2260-z
-
Electrochemical derusting in molten Na2CO3–K2CO3
2021, vol. 28, no. 4, pp. 637-643. doi: 10.1007/s12613-020-2068-2
-
Effect of in-situ nanoparticles on the mechanical properties and hydrogen embrittlement of high-strength steel
2021, vol. 28, no. 4, pp. 644-656. doi: 10.1007/s12613-020-2157-2
-
Comprehensive analysis of pulsed plasma nitriding preconditions on the fatigue behavior of AISI 304 austenitic stainless steel
2021, vol. 28, no. 4, pp. 657-664. doi: 10.1007/s12613-020-2097-x
-
Effect of quenching-partitioning treatment on the microstructure, mechanical and abrasive properties of high carbon steel
2021, vol. 28, no. 4, pp. 676-687. doi: 10.1007/s12613-020-2164-3
-
Strengthening mechanisms of reduced activation ferritic/martensitic steels: A review
2021, vol. 28, no. 3, pp. 335-348. doi: 10.1007/s12613-020-2121-1
-
Effect of nonmetallic inclusions on localized corrosion of spring steel
2021, vol. 28, no. 3, pp. 390-397. doi: 10.1007/s12613-020-2018-z
-
Wear and mechanical properties of carburized AISI 8620 steel produced by powder metallurgy
2021, vol. 28, no. 3, pp. 430-439. doi: 10.1007/s12613-020-2046-8
-
Corrosion behavior of cold-rolled and post heat-treated 316L stainless steel in 0.9wt% NaCl solution
2021, vol. 28, no. 3, pp. 440-449. doi: 10.1007/s12613-020-2054-8
-
Erosion-corrosion and its mitigation on the internal surface of the expansion segment of N80 steel tube
2021, vol. 28, no. 1, pp. 98-110. doi: 10.1007/s12613-020-2086-0
-
Microstructure and mechanical properties of friction welded carbon steel (EN24) and nickel-based superalloy (IN718)
2021, vol. 28, no. 1, pp. 111-119. doi: 10.1007/s12613-020-2008-1
-
Microstructure and mechanical properties of ultralow carbon high-strength steel weld metals with or without Cu−Nb addition
2021, vol. 28, no. 1, pp. 120-130. doi: 10.1007/s12613-020-2159-0
-
Influence of welding speed on microstructure formation in friction-stir-welded 304 austenitic stainless steels
2020, vol. 27, no. 11, pp. 1517-1524. doi: 10.1007/s12613-020-2001-8
-
Improvement in hot corrosion resistance of dissimilar alloy 825 and AISI 321 CO2-laser weldment by HVOF coating in aggressive salt environment at 900°C
2020, vol. 27, no. 11, pp. 1536-1550. doi: 10.1007/s12613-020-2014-3
-
Effect of flash processing on recrystallization behavior and mechanical performance of cold-rolled IF steel
2020, vol. 27, no. 9, pp. 1234-1243. doi: 10.1007/s12613-020-2023-2
-
High-temperature oxidation behavior of 9Cr‒5Si‒3Al ferritic heat-resistant steel
2020, vol. 27, no. 9, pp. 1244-1250. doi: 10.1007/s12613-019-1961-z
-
Microstructure and mechanical properties of high-strength low alloy steel by wire and arc additive manufacturing
2020, vol. 27, no. 7, pp. 933-942. doi: 10.1007/s12613-019-1919-1
-
Ultrasonic vibration assisted tungsten inert gas welding of dissimilar metals 316L and L415
2020, vol. 27, no. 7, pp. 943-953. doi: 10.1007/s12613-019-1960-0
-
Comparative study of mechanical, corrosion and erosion−corrosion properties of cast hyper-duplex and super-duplex stainless steels
2020, vol. 27, no. 7, pp. 954-961. doi: 10.1007/s12613-020-1984-5
-
In situ observation of the effect of AlN particles on bainitic transformation in a carbide-free medium carbon steel
2020, vol. 27, no. 5, pp. 620-629. doi: 10.1007/s12613-019-1911-9
-
Mechanical properties and wear resistance of ultrafine bainitic steel under low austempering temperature
2020, vol. 27, no. 4, pp. 483-493. doi: 10.1007/s12613-019-1916-4
-
Chloride resistance of Cr-bearing alloy steels in carbonated concrete pore solutions
2020, vol. 27, no. 4, pp. 494-504. doi: 10.1007/s12613-019-1920-8
-
Effect of gradient temperature rolling process on promoting crack healing in Q500 heavy plates
2020, vol. 27, no. 3, pp. 354-361. doi: 10.1007/s12613-019-1855-0
-
Effect of plastic strain and forming temperature on magnetic properties of low-carbon steel
2020, vol. 27, no. 2, pp. 210-219. doi: 10.1007/s12613-019-1905-7
-
Recent progress in third-generation low alloy steels developed under M3 microstructure control
2020, vol. 27, no. 1, pp. 1-9. doi: 10.1007/s12613-019-1939-x
Submit Manuscript
E-mail alert
RSS
