SearchComposites (2020–2024)
-
Giant reversible barocaloric effects with high thermal cycle stability in epoxy-bonded (MnCoGe)0.96(CuCoSn)0.04 composite
2024, vol. 31, no. 11, pp. 2528-2534. doi: 10.1007/s12613-024-2952-2
-
Effect of heat treatment on the microstructure, mechanical properties and fracture behaviors of ultra-high-strength SiC/Al–Zn–Mg–Cu composites
2024, vol. 31, no. 10, pp. 2233-2243. doi: 10.1007/s12613-024-2856-1
-
MgO-attached graphene nanosheet (MgO@GNS) reinforced magnesium matrix nanocomposite with superior mechanical, corrosion and biological performance
2024, vol. 31, no. 9, pp. 2062-2076. doi: 10.1007/s12613-023-2797-0
-
Study on the oxidation mechanism of Al–SiC composite at elevated temperature
2024, vol. 31, no. 9, pp. 2077-2087. doi: 10.1007/s12613-023-2778-3
-
Interconnected microstructure and flexural behavior of Ti2C–Ti composites with superior Young’s modulus
2024, vol. 31, no. 9, pp. 2088-2101. doi: 10.1007/s12613-024-2848-1
-
Novel wood–plastic composite fabricated via modified steel slag: Preparation, mechanical and flammability properties
2024, vol. 31, no. 9, pp. 2110-2120. doi: 10.1007/s12613-024-2829-4
-
Facile synthesis of composite polyferric magnesium–silicate–sulfate coagulant with enhanced performance in water and wastewater
2024, vol. 31, no. 3, pp. 574-584. doi: 10.1007/s12613-023-2704-8
-
Effect of Ni content on the wear behavior of Al–Si–Cu–Mg–Ni/SiC particles composites
2024, vol. 31, no. 2, pp. 374-383. doi: 10.1007/s12613-023-2701-y
-
Enhanced properties of stone coal-based composite phase change materials for thermal energy storage
2024, vol. 31, no. 1, pp. 206-215. doi: 10.1007/s12613-023-2682-x
-
Effect of Sr2+ on 3D gel-printed Sr3−xMgx(PO4)2 composite scaffolds for bone tissue engineering
2023, vol. 30, no. 11, pp. 2236-2244. doi: 10.1007/s12613-023-2638-1
-
Hot deformation behavior and microstructure evolution of Be/2024Al composites
2023, vol. 30, no. 11, pp. 2245-2258. doi: 10.1007/s12613-023-2662-1
-
Significant strengthening of copper-based composites using boron nitride nanotubes
2023, vol. 30, no. 9, pp. 1764-1778. doi: 10.1007/s12613-023-2633-6
-
Electromagnetic wave absorption and mechanical properties of SiC nanowire/low-melting-point glass composites sintered at 580°C in air
2023, vol. 30, no. 9, pp. 1809-1815. doi: 10.1007/s12613-023-2653-2
-
Bimetallic Pt–Ru covalently bonded on carbon nanotubes for efficient methanol oxidation
2023, vol. 30, no. 9, pp. 1816-1823. doi: 10.1007/s12613-023-2699-1
-
Modified sepiolite stabilized stearic acid as a form-stable phase change material for thermal energy storage
2023, vol. 30, no. 9, pp. 1835-1845. doi: 10.1007/s12613-023-2627-4
-
Application of g-C3N4/sol–gel nanocomposite on AM60B magnesium alloy and investigation of its properties
2023, vol. 30, no. 6, pp. 1113-1127. doi: 10.1007/s12613-022-2581-6
-
Corrosion, mechanical and microstructural properties of aluminum 7075–carbon nanotube nanocomposites for robots in corrosive environments
2023, vol. 30, no. 6, pp. 1140-1151. doi: 10.1007/s12613-022-2592-3
-
KOH-assisted aqueous synthesis of bimetallic metal-organic frameworks and their derived selenide composites for efficient lithium storage
2023, vol. 30, no. 4, pp. 601-610. doi: 10.1007/s12613-022-2539-8
-
Effect of N2 partial pressure on comprehensive properties of antibacterial TiN/Cu nanocomposite coating
2023, vol. 30, no. 1, pp. 131-143. doi: 10.1007/s12613-021-2387-y
-
Effect of chromium interlayer thickness on interfacial thermal conductance across copper/diamond interface
2022, vol. 29, no. 11, pp. 2020-2031. doi: 10.1007/s12613-021-2336-9
-
Characterization and ultraviolet–visible shielding property of samarium–cerium compounds containing Sm2O2S prepared by co-precipitation method
2022, vol. 29, no. 9, pp. 1809-1816. doi: 10.1007/s12613-021-2309-z
-
Intermetallic growth behavior during post deformation annealing in multilayer Ti/Al/Nb composite interfaces
2022, vol. 29, no. 8, pp. 1608-1617. doi: 10.1007/s12613-021-2263-9
-
Fabrication and performance of 3D co-continuous magnesium composites reinforced with Ti2AlNx MAX phase
2022, vol. 29, no. 7, pp. 1406-1412. doi: 10.1007/s12613-022-2427-2
-
Mechanical properties of Al–15Mg2Si composites prepared under different solidification cooling rates
2022, vol. 29, no. 6, pp. 1249-1260. doi: 10.1007/s12613-020-2244-4
-
Reciprocating sliding wear properties of sintered Al‒B4C composites
2022, vol. 29, no. 6, pp. 1261-1269. doi: 10.1007/s12613-020-2243-5
-
Wear behavior of Zn–38Al–3.5Cu–1.2Mg/SiCp composite under different stabilization treatments
2022, vol. 29, no. 6, pp. 1270-1279. doi: 10.1007/s12613-020-2217-7
-
Titanium dioxide-graphene composite electrochemical sensor for detection of hexavalent chromium
2022, vol. 29, no. 3, pp. 529-535. doi: 10.1007/s12613-021-2338-7
-
Research progress in interface modification and thermal conduction behavior of diamond/metal composites
2022, vol. 29, no. 2, pp. 200-211. doi: 10.1007/s12613-021-2339-6
-
Effect of graphene oxide on the corrosion, mechanical and biological properties of Mg-based nanocomposite
2022, vol. 29, no. 2, pp. 305-319. doi: 10.1007/s12613-020-2201-2
-
Functionalization of diatomite with glycine and amino silane for formaldehyde removal
2022, vol. 29, no. 2, pp. 356-367. doi: 10.1007/s12613-020-2245-3
-
Effect of graphene addition on the physicomechanical and tribological properties of Cu nanocomposites
2022, vol. 29, no. 1, pp. 161-167. doi: 10.1007/s12613-020-2183-0
-
Graphene oxide wrapped magnetic nanoparticle composites induced by SiO2 coating with excellent regenerability
2021, vol. 28, no. 12, pp. 2001-2007. doi: 10.1007/s12613-020-2229-3
-
Microstructure and mechanical properties of reaction-bonded B4C–SiC composites
2021, vol. 28, no. 11, pp. 1828-1835. doi: 10.1007/s12613-020-2207-9
-
A chain-like compound of Si@CNT nanostructures and MOF-derived porous carbon as an anode for Li-ion batteries
2021, vol. 28, no. 10, pp. 1611-1620. doi: 10.1007/s12613-021-2266-6
-
Enhanced electrochemical performance of Si/C electrode through surface modification using SrF2 particle
2021, vol. 28, no. 10, pp. 1621-1628. doi: 10.1007/s12613-021-2270-x
-
Preparation of CoO/SnO2@NC/S composite as high-stability cathode material for lithium-sulfur batteries
2021, vol. 28, no. 10, pp. 1647-1655. doi: 10.1007/s12613-021-2315-1
-
High-performance lithium–sulfur battery based on porous N-rich g-C3N4 nanotubes via a self-template method
2021, vol. 28, no. 10, pp. 1656-1665. doi: 10.1007/s12613-021-2319-x
-
MnO2/carbon nanocomposite based on silkworm excrement for high-performance supercapacitors
2021, vol. 28, no. 10, pp. 1735-1744. doi: 10.1007/s12613-021-2272-8
-
Fabrication and characterization of GNPs and CNTs reinforced Al7075 matrix composites through the stir casting process
2021, vol. 28, no. 7, pp. 1204-1214. doi: 10.1007/s12613-020-2101-5
-
Sliding wear behaviour of Fe/316L/430–Ti(C,N) composites prepared via spark plasma sintering and subsequent heat treatment
2021, vol. 28, no. 7, pp. 1215-1223. doi: 10.1007/s12613-020-2108-y
-
Powder metallurgy of high-entropy alloys and related composites: A short review
2021, vol. 28, no. 6, pp. 931-943. doi: 10.1007/s12613-020-2221-y
-
Preparation and photocatalytic property of Fe2O3/ZnO composites with superhydrophobicity
2021, vol. 28, no. 6, pp. 1072-1079. doi: 10.1007/s12613-020-2096-y
-
Processing and characterization of the microstructure and mechanical properties of Al6061–TiB2 composite
2021, vol. 28, no. 6, pp. 1080-1089. doi: 10.1007/s12613-021-2288-0
-
Competitive precipitation behavior of hybrid reinforcements in copper matrix composites fabricated by powder metallurgy
2021, vol. 28, no. 6, pp. 1090-1096. doi: 10.1007/s12613-020-2052-x
-
Evaluation of the microstructure, thermal and mechanical properties of Cu/SiC nanocomposites fabricated by mechanical alloying
2021, vol. 28, no. 3, pp. 475-486. doi: 10.1007/s12613-020-2176-z
-
Construction of TiO2-pillared multilayer graphene nanocomposites as efficient photocatalysts for ciprofloxacin degradation
2021, vol. 28, no. 3, pp. 503-510. doi: 10.1007/s12613-020-2193-y
-
Effect of groove rolling on the microstructure and properties of Cu–Nb microcomposite wires
2021, vol. 28, no. 2, pp. 279-284. doi: 10.1007/s12613-020-2073-5
-
Sn/Sn3O4−x heterostructure rich in oxygen vacancies with enhanced visible light photocatalytic oxidation performance
2021, vol. 28, no. 1, pp. 150-159. doi: 10.1007/s12613-020-2131-z
-
Fabrication of robust aluminum–carbon nanotube composites using ultrasonic assembly and rolling process
2021, vol. 28, no. 1, pp. 160-167. doi: 10.1007/s12613-020-1969-4
-
In vitro bioactivity and corrosion of PLGA/hardystonite composite-coated magnesium-based nanocomposite for implant applications
2021, vol. 28, no. 1, pp. 168-178. doi: 10.1007/s12613-020-2072-6
-
Research progress on the characterization and repair of graphene defects
2020, vol. 27, no. 9, pp. 1179-1190. doi: 10.1007/s12613-020-2031-2
-
Mechanical properties of graphene nanoplatelets reinforced 7075 aluminum alloy composite fabricated by spark plasma sintering
2020, vol. 27, no. 9, pp. 1295-1300. doi: 10.1007/s12613-020-2009-0
-
A comparative study between friction stir processing and friction stir vibration processing to develop magnesium surface nanocomposites
2020, vol. 27, no. 8, pp. 1133-1146. doi: 10.1007/s12613-020-1993-4
-
Deformation treatment and microstructure of graphene-reinforced metalmatrix nanocomposites: A review of graphene post-dispersion
2020, vol. 27, no. 7, pp. 888-899. doi: 10.1007/s12613-020-2048-6
-
Formation of interfacial Al−Ce−Cu−W amorphous layers in aluminum matrix composite through thermally driven solid-state amorphization
2020, vol. 27, no. 7, pp. 970-979. doi: 10.1007/s12613-019-1952-0
-
Biodegradable magnesium-matrix composites: A review
2020, vol. 27, no. 6, pp. 724-744. doi: 10.1007/s12613-020-1987-2
-
Electrodeposition of functionally graded Ni−W/Er2O3 rare earth nanoparticle composite film
2020, vol. 27, no. 6, pp. 818-829. doi: 10.1007/s12613-019-1953-z
-
Mechanical characterization of Mg−B4C nanocomposite fabricated at different strain rates
2020, vol. 27, no. 2, pp. 252-263. doi: 10.1007/s12613-019-1902-x
Submit Manuscript
E-mail alert
RSS
