SearchReview Articles (2020–2024)
-
Hydrometallurgical processing of chalcopyrite: A review of leaching techniques
2024, vol. 31, no. 12, pp. 2537-2555. doi: 10.1007/s12613-024-2934-4
-
Valuable metals recovery from spent ternary lithium-ion battery: A review
2024, vol. 31, no. 12, pp. 2556-2581. doi: 10.1007/s12613-024-2895-7
-
Corrosion techniques and strategies for used fuel containers with copper corrosion barriers under deep geological disposal conditions: A review
2024, vol. 31, no. 12, pp. 2582-2606. doi: 10.1007/s12613-024-2949-x
-
A critical review of direct laser additive manufacturing ceramics
2024, vol. 31, no. 12, pp. 2607-2626. doi: 10.1007/s12613-024-2960-2
-
Comparative review of corrosion-resistant coatings on metal bipolar plates of proton exchange membrane fuel cells
2024, vol. 31, no. 12, pp. 2627-2644. doi: 10.1007/s12613-024-2946-0
-
A review of in-situ high-temperature characterizations for understanding the processes in metallurgical engineering
2024, vol. 31, no. 11, pp. 2327-2344. doi: 10.1007/s12613-024-2891-y
-
Recent progress in Ni-rich layered oxides and related cathode materials for Li-ion cells
2024, vol. 31, no. 11, pp. 2345-2367. doi: 10.1007/s12613-024-2948-y
-
Advances in noble metal-modified g-C3N4 heterostructures toward enhanced photocatalytic redox ability
2024, vol. 31, no. 11, pp. 2368-2389. doi: 10.1007/s12613-024-2924-6
-
Research progress and future prospects in the service security of key blast furnace equipment
2024, vol. 31, no. 10, pp. 2121-2135. doi: 10.1007/s12613-024-2850-7
-
Electrospinning-hot pressing technique for the fabrication of thermal and electrical storage membranes and its applications
2024, vol. 31, no. 9, pp. 1945-1964. doi: 10.1007/s12613-024-2842-7
-
Retrospective and prospective review of the generalized nonlinear strength theory for geomaterials
2024, vol. 31, no. 8, pp. 1767-1787. doi: 10.1007/s12613-024-2929-1
-
Theory, technology and application of grouted bolting in soft rock roadways of deep coal mines
2024, vol. 31, no. 7, pp. 1463-1479. doi: 10.1007/s12613-024-2906-8
-
Pyrometallurgical recycling of end-of-life lithium-ion batteries
2024, vol. 31, no. 7, pp. 1554-1571. doi: 10.1007/s12613-024-2907-7
-
Review on the design of high-strength and hydrogen-embrittlement-resistant steels
2024, vol. 31, no. 7, pp. 1572-1589. doi: 10.1007/s12613-024-2900-1
-
Effect of bipolar-plates design on corrosion, mass and heat transfer in proton-exchange membrane fuel cells and water electrolyzers: A review
2024, vol. 31, no. 7, pp. 1599-1616. doi: 10.1007/s12613-023-2803-6
-
Recent progresses in thermal treatment of β-Ga2O3 single crystals and devices
2024, vol. 31, no. 7, pp. 1659-1677. doi: 10.1007/s12613-024-2926-4
-
Nonreciprocal thermal metamaterials: Methods and applications
2024, vol. 31, no. 7, pp. 1678-1693. doi: 10.1007/s12613-023-2811-6
-
Cycling performance of layered oxide cathode materials for sodium-ion batteries
2024, vol. 31, no. 7, pp. 1720-1744. doi: 10.1007/s12613-023-2776-5
-
Recent advances and perspectives in MXene-based cathodes for aqueous zinc-ion batteries
2024, vol. 31, no. 7, pp. 1752-1765. doi: 10.1007/s12613-024-2859-y
-
Research progress of CO2 capture and mineralization based on natural minerals
2024, vol. 31, no. 6, pp. 1208-1227. doi: 10.1007/s12613-023-2785-4
-
Development in oxide metallurgy for improving the weldability of high-strength low-alloy steel—Combined deoxidizers and microalloying elements
2024, vol. 31, no. 6, pp. 1263-1284. doi: 10.1007/s12613-023-2754-y
-
Review on the plastic instability of medium-Mn steels for identifying the formation mechanisms of Lüders and Portevin–Le Chatelier bands
2024, vol. 31, no. 6, pp. 1285-1297. doi: 10.1007/s12613-023-2751-1
-
Recent progress in visualization and digitization of coherent transformation structures and application in high-strength steel
2024, vol. 31, no. 6, pp. 1298-1310. doi: 10.1007/s12613-023-2781-8
-
Microstructure and forming mechanism of metals subjected to ultrasonic vibration plastic forming: A mini review
2024, vol. 31, no. 6, pp. 1322-1332. doi: 10.1007/s12613-023-2745-z
-
Microstructures and micromechanical behaviors of high-entropy alloys investigated by synchrotron X-ray and neutron diffraction techniques: A review
2024, vol. 31, no. 6, pp. 1333-1349. doi: 10.1007/s12613-024-2840-9
-
Relationship between the unique microstructures and behaviors of high-entropy alloys
2024, vol. 31, no. 6, pp. 1350-1363. doi: 10.1007/s12613-023-2777-4
-
A review of linear friction welding of Ni-based superalloys
2024, vol. 31, no. 6, pp. 1382-1391. doi: 10.1007/s12613-023-2782-7
-
Current progress of research on heat-resistant Mg alloys: A review
2024, vol. 31, no. 6, pp. 1406-1425. doi: 10.1007/s12613-023-2802-7
-
Spin logic devices based on negative differential resistance-enhanced anomalous Hall effect
2024, vol. 31, no. 6, pp. 1437-1448. doi: 10.1007/s12613-024-2855-2
-
Recent progress in the research on magnesium and magnesium alloy foils: A short review
2024, vol. 31, no. 5, pp. 842-854. doi: 10.1007/s12613-024-2846-3
-
Literature overview of basic characteristics and flotation laws of flocs
2024, vol. 31, no. 5, pp. 943-958. doi: 10.1007/s12613-023-2786-3
-
Coke behavior with H2O in a hydrogen-enriched blast furnace: A review
2024, vol. 31, no. 5, pp. 959-976. doi: 10.1007/s12613-024-2854-3
-
Irregular initial solidification by mold thermal monitoring in the continuous casting of steels: A review
2024, vol. 31, no. 5, pp. 1003-1015. doi: 10.1007/s12613-023-2798-z
-
Recent research progress in the mechanism and suppression of fusion welding-induced liquation cracking of nickel based superalloys
2024, vol. 31, no. 5, pp. 1072-1088. doi: 10.1007/s12613-024-2869-9
-
Review of Sc microalloying effects in Al–Cu alloys
2024, vol. 31, no. 5, pp. 1098-1114. doi: 10.1007/s12613-024-2841-8
-
Modulating charge separation and transfer for high-performance photoelectrodes via built-in electric field
2024, vol. 31, no. 5, pp. 1126-1146. doi: 10.1007/s12613-024-2862-3
-
Disturbance failure mechanism of highly stressed rock in deep excavation: Current status and prospects
2024, vol. 31, no. 4, pp. 611-627. doi: 10.1007/s12613-024-2864-1
-
Extraction and recycling technologies of cobalt from primary and secondary resources: A comprehensive review
2024, vol. 31, no. 4, pp. 628-649. doi: 10.1007/s12613-023-2734-2
-
Integrated high-performance and accurate shaping technology of low-cost powder metallurgy titanium alloys: A comprehensive review
2024, vol. 31, no. 3, pp. 413-426. doi: 10.1007/s12613-023-2774-7
-
Recent progresses in the development of tubular segmented-in-series solid oxide fuel cells: Experimental and numerical study
2024, vol. 31, no. 3, pp. 427-442. doi: 10.1007/s12613-023-2771-x
-
Recent progress on Sn3O4 nanomaterials for photocatalytic applications
2024, vol. 31, no. 2, pp. 231-244. doi: 10.1007/s12613-023-2761-z
-
Progress in the research on organic piezoelectric catalysts for dye decomposition
2024, vol. 31, no. 2, pp. 245-260. doi: 10.1007/s12613-023-2773-8
-
Advances in depressants for flotation separation of Cu–Fe sulfide minerals at low alkalinity: A critical review
2024, vol. 31, no. 1, pp. 1-17. doi: 10.1007/s12613-023-2709-3
-
Development and prospects of molten steel deoxidation in steelmaking process
2024, vol. 31, no. 1, pp. 18-32. doi: 10.1007/s12613-023-2740-4
-
Recent advances and perspectives of zinc metal-free anodes for zinc ion batteries
2024, vol. 31, no. 1, pp. 33-47. doi: 10.1007/s12613-023-2665-y
-
Metal-to-insulator transitions in 3d-band correlated oxides containing Fe compositions
2024, vol. 31, no. 1, pp. 48-59. doi: 10.1007/s12613-023-2712-8
-
Formation and control of the surface defect in hypo-peritectic steel during continuous casting: A review
2023, vol. 30, no. 12, pp. 2281-2296. doi: 10.1007/s12613-023-2716-4
-
Structural survey of metal–covalent organic frameworks and covalent metal–organic frameworks
2023, vol. 30, no. 12, pp. 2297-2309. doi: 10.1007/s12613-023-2690-x
-
State of the art in applications of machine learning in steelmaking process modeling
2023, vol. 30, no. 11, pp. 2055-2075. doi: 10.1007/s12613-023-2646-1
-
Hydrometallurgical detoxification and recycling of electric arc furnace dust
2023, vol. 30, no. 11, pp. 2076-2094. doi: 10.1007/s12613-023-2637-2
-
Recent research progress on the phase-field model of microstructural evolution during metal solidification
2023, vol. 30, no. 11, pp. 2095-2111. doi: 10.1007/s12613-023-2710-x
-
Functionalized carbon dots for corrosion protection: Recent advances and future perspectives
2023, vol. 30, no. 11, pp. 2112-2133. doi: 10.1007/s12613-023-2675-9
-
Recent advances and influencing parameters in developing electrode materials for symmetrical solid oxide fuel cells
2023, vol. 30, no. 10, pp. 1933-1956. doi: 10.1007/s12613-023-2694-6
-
Crystalline framework nanosheets as platforms for functional materials
2023, vol. 30, no. 10, pp. 1986-2005. doi: 10.1007/s12613-023-2696-4
-
Flotation separation depressants for scheelite and calcium-bearing minerals: A review
2023, vol. 30, no. 9, pp. 1621-1632. doi: 10.1007/s12613-023-2613-x
-
Current situation of carbon emissions and countermeasures in China’s ironmaking industry
2023, vol. 30, no. 9, pp. 1633-1650. doi: 10.1007/s12613-023-2632-7
-
Key issues and progress of industrial big data-based intelligent blast furnace ironmaking technology
2023, vol. 30, no. 9, pp. 1651-1666. doi: 10.1007/s12613-023-2636-3
-
Impact of W alloying on microstructure, mechanical property and corrosion resistance of face-centered cubic high entropy alloys: A review
2023, vol. 30, no. 9, pp. 1667-1679. doi: 10.1007/s12613-023-2641-6
-
Systematic review of mixing technology for recycling waste tailings as cemented paste backfill in mines in China
2023, vol. 30, no. 8, pp. 1430-1443. doi: 10.1007/s12613-023-2609-6
-
Rheological properties of a multiscale granular system during mixing of cemented paste backfill: A review
2023, vol. 30, no. 8, pp. 1444-1454. doi: 10.1007/s12613-023-2601-1
-
Progress and prospects of mining with backfill in metal mines in China
2023, vol. 30, no. 8, pp. 1455-1473. doi: 10.1007/s12613-023-2663-0
-
Interaction between in situ stress states and tectonic faults: A comment
2023, vol. 30, no. 7, pp. 1227-1243. doi: 10.1007/s12613-023-2607-8
-
Latest advances and progress in the microbubble flotation of fine minerals: Microbubble preparation, equipment, and applications
2023, vol. 30, no. 7, pp. 1244-1260. doi: 10.1007/s12613-023-2615-8
-
Surface metal-matrix composites based on AZ91 magnesium alloy via friction stir processing: A review
2023, vol. 30, no. 7, pp. 1278-1296. doi: 10.1007/s12613-022-2589-y
-
Recycling and recovery of spent copper–indium–gallium–diselenide (CIGS) solar cells: A review
2023, vol. 30, no. 6, pp. 989-1002. doi: 10.1007/s12613-022-2552-y
-
Advances in machine learning- and artificial intelligence-assisted material design of steels
2023, vol. 30, no. 6, pp. 1003-1024. doi: 10.1007/s12613-022-2595-0
-
Design principles in MOF-derived electromagnetic wave absorption materials: Review and perspective
2023, vol. 30, no. 3, pp. 405-427. doi: 10.1007/s12613-022-2555-8
-
Current advances of transition metal dichalcogenides in electromagnetic wave absorption: A brief review
2023, vol. 30, no. 3, pp. 428-445. doi: 10.1007/s12613-022-2546-9
-
A literature review of MOF derivatives of electromagnetic wave absorbers mainly based on pyrolysis
2023, vol. 30, no. 3, pp. 446-473. doi: 10.1007/s12613-022-2562-9
-
Experimental research and numerical simulation of the multi-field performance of cemented paste backfill: Review and future perspectives
2023, vol. 30, no. 2, pp. 193-208. doi: 10.1007/s12613-022-2537-x
-
A review of lithium extraction from natural resources
2023, vol. 30, no. 2, pp. 209-224. doi: 10.1007/s12613-022-2544-y
-
Perspective on low-temperature electrolytes for LiFePO4-based lithium-ion batteries
2023, vol. 30, no. 1, pp. 1-13. doi: 10.1007/s12613-022-2541-1
-
Recent advances in the nanoconfinement of Mg-related hydrogen storage materials: A minor review
2023, vol. 30, no. 1, pp. 14-24. doi: 10.1007/s12613-022-2519-z
-
Review on coal-based reduction and magnetic separation for refractory iron-bearing resources
2022, vol. 29, no. 12, pp. 2087-2105. doi: 10.1007/s12613-021-2408-x
-
Preparation and hydration of industrial solid waste–cement blends: A review
2022, vol. 29, no. 12, pp. 2106-2116. doi: 10.1007/s12613-022-2538-9
-
Hematite reduction by hydrogen plasma: Where are we now?
2022, vol. 29, no. 10, pp. 1932-1945. doi: 10.1007/s12613-022-2467-7
-
A review of intelligent ore sorting technology and equipment development
2022, vol. 29, no. 9, pp. 1647-1655. doi: 10.1007/s12613-022-2477-5
-
Reagent types and action mechanisms in ilmenite flotation: A review
2022, vol. 29, no. 9, pp. 1656-1669. doi: 10.1007/s12613-021-2380-5
-
Mechanical, expansion and rheological properties of circulating fluidized bed fly ash based ecological cement: A critical review
2022, vol. 29, no. 9, pp. 1670-1682. doi: 10.1007/s12613-021-2403-2
-
Review of electrodeposition methods for the preparation of high-entropy alloys
2022, vol. 29, no. 9, pp. 1683-1696. doi: 10.1007/s12613-022-2439-y
-
Application of low-cost particulate matter sensors for air quality monitoring and exposure assessment in underground mines: A review
2022, vol. 29, no. 8, pp. 1475-1490. doi: 10.1007/s12613-021-2378-z
-
Review on the phosphate-based conversion coatings of magnesium and its alloys
2022, vol. 29, no. 7, pp. 1435-1452. doi: 10.1007/s12613-022-2419-2
-
Review on biomass metallurgy: Pretreatment technology, metallurgical mechanism and process design
2022, vol. 29, no. 6, pp. 1133-1149. doi: 10.1007/s12613-022-2501-9
-
A critical review on nickel-based cathodes in rechargeable batteries
2022, vol. 29, no. 5, pp. 925-941. doi: 10.1007/s12613-022-2446-z
-
Electrolyte and current collector designs for stable lithium metal anodes
2022, vol. 29, no. 5, pp. 953-964. doi: 10.1007/s12613-022-2442-3
-
Decoding lithium batteries through advanced in situcharacterization techniques
2022, vol. 29, no. 5, pp. 965-989. doi: 10.1007/s12613-022-2461-0
-
Metal phosphides and borides as the catalytic host of sulfur cathode for lithium–sulfur batteries
2022, vol. 29, no. 5, pp. 990-1002. doi: 10.1007/s12613-022-2451-2
-
Review of the electrochemical performance and interfacial issues of high-nickel layered cathodes in inorganic all-solid-state batteries
2022, vol. 29, no. 5, pp. 1003-1018. doi: 10.1007/s12613-022-2453-0
-
Mechano-electrochemical perspectives on flexible lithium-ion batteries
2022, vol. 29, no. 5, pp. 1019-1036. doi: 10.1007/s12613-022-2486-4
-
Recent progress and prospective on layered anode materials for potassium-ion batteries
2022, vol. 29, no. 5, pp. 1037-1052. doi: 10.1007/s12613-022-2470-z
-
Hydrogen as a carrier of renewable energies toward carbon neutrality: State-of-the-art and challenging issues
2022, vol. 29, no. 5, pp. 1073-1089. doi: 10.1007/s12613-022-2449-9
-
Process and challenges of stainless steel based bipolar plates for proton exchange membrane fuel cells
2022, vol. 29, no. 5, pp. 1099-1119. doi: 10.1007/s12613-022-2485-5
-
Influencing factors and mechanism of iodine-induced stress corrosion cracking of zirconium alloy cladding: A review
2022, vol. 29, no. 4, pp. 586-598. doi: 10.1007/s12613-022-2431-6
-
Current situation and development trend of titanium metal industry in China
2022, vol. 29, no. 4, pp. 599-610. doi: 10.1007/s12613-022-2455-y
-
Smart manufacturing of nonferrous metallurgical processes: Review and perspectives
2022, vol. 29, no. 4, pp. 611-625. doi: 10.1007/s12613-022-2448-x
-
Technology strategies to achieve carbon peak and carbon neutrality for China’s metal mines
2022, vol. 29, no. 4, pp. 626-634. doi: 10.1007/s12613-021-2374-3
-
Recent progress in the machine learning-assisted rational design of alloys
2022, vol. 29, no. 4, pp. 635-644. doi: 10.1007/s12613-022-2458-8
-
Titanium microalloying of steel: A review of its effects on processing, microstructure and mechanical properties
2022, vol. 29, no. 4, pp. 645-661. doi: 10.1007/s12613-021-2399-7
-
Flexible electronics and optoelectronics of 2D van der Waals materials
2022, vol. 29, no. 4, pp. 671-690. doi: 10.1007/s12613-022-2426-3
-
Energy storage for black start services: A review
2022, vol. 29, no. 4, pp. 691-704. doi: 10.1007/s12613-022-2445-0
-
Research progress of the fundamental theory and technology of rock blasting
2022, vol. 29, no. 4, pp. 705-716. doi: 10.1007/s12613-022-2464-x
-
Rheological behavior of paste in metal mines
2022, vol. 29, no. 4, pp. 717-726. doi: 10.1007/s12613-022-2423-6
-
Surface nanobubble characterization and its enhancement mechanisms for fine-particle flotation: A review
2022, vol. 29, no. 4, pp. 727-738. doi: 10.1007/s12613-022-2450-3
-
Recycling of ironmaking and steelmaking slags in Japan and China
2022, vol. 29, no. 4, pp. 739-749. doi: 10.1007/s12613-021-2400-5
-
Recent progress in upgrading metallurgical-grade silicon to solar-grade silicon via pyrometallurgical routes
2022, vol. 29, no. 4, pp. 767-782. doi: 10.1007/s12613-022-2418-3
-
Mixed ion and electron transport theory and application in solid oxide conductors
2022, vol. 29, no. 4, pp. 870-875. doi: 10.1007/s12613-021-2401-4
-
A review on the critical challenges and progress of SiOx-based anodes for lithium-ion batteries
2022, vol. 29, no. 4, pp. 876-895. doi: 10.1007/s12613-022-2422-7
-
Research progress on selective laser melting processing for nickel-based superalloy
2022, vol. 29, no. 3, pp. 369-388. doi: 10.1007/s12613-021-2331-1
-
Tribological properties of high-entropy alloys: A review
2022, vol. 29, no. 3, pp. 389-403. doi: 10.1007/s12613-021-2373-4
-
Carbon materials: The burgeoning promise in electronics
2022, vol. 29, no. 3, pp. 404-423. doi: 10.1007/s12613-021-2358-3
-
Review of the fabrication and application of porous materials from silicon-rich industrial solid waste
2022, vol. 29, no. 3, pp. 424-438. doi: 10.1007/s12613-021-2360-9
-
A review of the strengthening–toughening behavior and mechanisms of advanced structural materials by multifield coupling treatment
2022, vol. 29, no. 2, pp. 185-199. doi: 10.1007/s12613-021-2350-y
-
Research progress in interface modification and thermal conduction behavior of diamond/metal composites
2022, vol. 29, no. 2, pp. 200-211. doi: 10.1007/s12613-021-2339-6
-
A review of the synthesis and application of zeolites from coal-based solid wastes
2022, vol. 29, no. 1, pp. 1-21. doi: 10.1007/s12613-021-2256-8
-
Recent progress of efficient utilization of titanium-bearing blast furnace slag
2022, vol. 29, no. 1, pp. 22-31. doi: 10.1007/s12613-021-2323-1
-
Kinetics of the hydrogen absorption and desorption processes of hydrogen storage alloys: A review
2022, vol. 29, no. 1, pp. 32-48. doi: 10.1007/s12613-021-2337-8
-
Controlled crystal orientation of two-dimensional Ruddlesden–Popper halide perovskite films for solar cells
2022, vol. 29, no. 1, pp. 49-58. doi: 10.1007/s12613-021-2341-z
-
Review of silicon-based alloys for lithium-ion battery anodes
2021, vol. 28, no. 10, pp. 1549-1564. doi: 10.1007/s12613-021-2335-x
-
Practical development and challenges of garnet-structured Li7La3Zr2O12 electrolytes for all-solid-state lithium-ion batteries: A review
2021, vol. 28, no. 10, pp. 1565-1583. doi: 10.1007/s12613-020-2239-1
-
Solid electrolyte–electrode interface based on buffer therapy in solid-state lithium batteries
2021, vol. 28, no. 10, pp. 1584-1602. doi: 10.1007/s12613-021-2278-2
-
Review and prospects of bioleaching in the Chinese mining industry
2021, vol. 28, no. 9, pp. 1397-1412. doi: 10.1007/s12613-020-2233-7
-
Review of electrochemical degradation of phenolic compounds
2021, vol. 28, no. 9, pp. 1413-1428. doi: 10.1007/s12613-020-2241-7
-
Review on the study of metallurgical process engineering
2021, vol. 28, no. 8, pp. 1253-1263. doi: 10.1007/s12613-020-2220-z
-
Mechanism and monitoring and early warning technology for rockburst in coal mines
2021, vol. 28, no. 7, pp. 1097-1111. doi: 10.1007/s12613-021-2267-5
-
Influence of grain refinement on the corrosion behavior of metallic materials: A review
2021, vol. 28, no. 7, pp. 1112-1126. doi: 10.1007/s12613-021-2308-0
-
Recovery and separation of rare earth elements by molten salt electrolysis
2021, vol. 28, no. 6, pp. 899-914. doi: 10.1007/s12613-020-2228-4
-
Influencing factors and mechanism of high-temperature oxidation of high-entropy alloys: A review
2021, vol. 28, no. 6, pp. 915-930. doi: 10.1007/s12613-021-2257-7
-
Powder metallurgy of high-entropy alloys and related composites: A short review
2021, vol. 28, no. 6, pp. 931-943. doi: 10.1007/s12613-020-2221-y
-
Medium-Mn steels for hot forming application in the automotive industry
2021, vol. 28, no. 5, pp. 741-753. doi: 10.1007/s12613-020-2179-9
-
Effect of microstructure on corrosion behavior of high strength martensite steel—A literature review
2021, vol. 28, no. 5, pp. 754-773. doi: 10.1007/s12613-020-2242-6
-
Mitigation of greenhouse gases released from mining activities: A review
2021, vol. 28, no. 4, pp. 513-521. doi: 10.1007/s12613-020-2155-4
-
Progress in developing self-consolidating concrete (SCC) constituting recycled concrete aggregates: A review
2021, vol. 28, no. 4, pp. 522-537. doi: 10.1007/s12613-020-2060-x
-
Research progress of the electrochemical impedance technique applied to the high-capacity lithium-ion battery
2021, vol. 28, no. 4, pp. 538-552. doi: 10.1007/s12613-020-2218-6
-
Effects of heat treatment on the microstructure and mechanical properties of Ni3Al-based superalloys: A review
2021, vol. 28, no. 4, pp. 553-566. doi: 10.1007/s12613-020-2177-y
-
Review on cyclic plasticity of magnesium alloys: Experiments and constitutive models
2021, vol. 28, no. 4, pp. 567-589. doi: 10.1007/s12613-020-2216-8
-
Strengthening mechanisms of reduced activation ferritic/martensitic steels: A review
2021, vol. 28, no. 3, pp. 335-348. doi: 10.1007/s12613-020-2121-1
-
Reduction, reuse and recycle of spent Li-ion batteries for automobiles: A review
2021, vol. 28, no. 2, pp. 179-192. doi: 10.1007/s12613-020-2127-8
-
Application and prospective of 3D printing in rock mechanics: A review
2021, vol. 28, no. 1, pp. 1-17. doi: 10.1007/s12613-020-2119-8
-
Review on desulfurization in electroslag remelting
2021, vol. 28, no. 1, pp. 18-29. doi: 10.1007/s12613-020-2075-3
-
Review of the fatigue behavior of hard coating–ductile substrate systems
2021, vol. 28, no. 1, pp. 46-55. doi: 10.1007/s12613-020-2203-0
-
Interactions of molten salts with cathode products in the FFC Cambridge Process
2020, vol. 27, no. 12, pp. 1572-1587. doi: 10.1007/s12613-020-2202-1
-
A review on liquid metals as cathodes for molten salt/oxide electrolysis
2020, vol. 27, no. 12, pp. 1588-1598. doi: 10.1007/s12613-020-1971-x
-
Applications of molten salt and progress of molten salt electrolysis in secondary metal resource recovery
2020, vol. 27, no. 12, pp. 1599-1617. doi: 10.1007/s12613-020-2175-0
-
A review of carbon dioxide disposal technology in the converter steelmaking process
2020, vol. 27, no. 11, pp. 1421-1429. doi: 10.1007/s12613-020-2065-5
-
Mechanics and safety issues in tailing-based backfill: A review
2020, vol. 27, no. 9, pp. 1165-1178. doi: 10.1007/s12613-020-2004-5
-
Research progress on the characterization and repair of graphene defects
2020, vol. 27, no. 9, pp. 1179-1190. doi: 10.1007/s12613-020-2031-2
-
Mine tailings as a raw material in alkali activation: A review
2020, vol. 27, no. 8, pp. 1009-1020. doi: 10.1007/s12613-020-2129-6
-
Correlation between surface charge and hydration on mineral surfaces in aqueous solutions: A critical review
2020, vol. 27, no. 7, pp. 857-871. doi: 10.1007/s12613-020-2078-0
-
Mechanism investigation on coal and gas outburst: An overview
2020, vol. 27, no. 7, pp. 872-887. doi: 10.1007/s12613-019-1956-9
-
Deformation treatment and microstructure of graphene-reinforced metalmatrix nanocomposites: A review of graphene post-dispersion
2020, vol. 27, no. 7, pp. 888-899. doi: 10.1007/s12613-020-2048-6
-
Development and progress on hydrogen metallurgy
2020, vol. 27, no. 6, pp. 713-723. doi: 10.1007/s12613-020-2021-4
-
Biodegradable magnesium-matrix composites: A review
2020, vol. 27, no. 6, pp. 724-744. doi: 10.1007/s12613-020-1987-2
-
Interactive effect of minerals on complex ore flotation: A brief review
2020, vol. 27, no. 5, pp. 571-583. doi: 10.1007/s12613-020-1999-y
-
Anodized metal oxide nanostructures for photoelectrochemical water splitting
2020, vol. 27, no. 5, pp. 584-601. doi: 10.1007/s12613-020-1983-6
-
Causes and detection of coalfield fires, control techniques, and heat energy recovery: A review
2020, vol. 27, no. 3, pp. 275-291. doi: 10.1007/s12613-019-1947-x
-
Big data management in the mining industry
2020, vol. 27, no. 2, pp. 131-139. doi: 10.1007/s12613-019-1937-z
-
Recent progress in third-generation low alloy steels developed under M3 microstructure control
2020, vol. 27, no. 1, pp. 1-9. doi: 10.1007/s12613-019-1939-x
Submit Manuscript
E-mail alert
RSS
