SearchCorrosion and Coating Protection (2020–2023)
-
Prediction model for corrosion rate of low-alloy steels under atmospheric conditions using machine learning algorithms
2024, vol. 31, no. 2, pp. 337-350. doi: 10.1007/s12613-023-2679-5
-
High corrosion and wear resistant electroless Ni–P gradient coatings on aviation aluminum alloy parts
2024, vol. 31, no. 1, pp. 155-164. doi: 10.1007/s12613-023-2689-3
-
High throughput screening of localised and general corrosion in type 2205 duplex stainless steel at ambient temperature
2023, vol. 30, no. 12, pp. 2375-2385. doi: 10.1007/s12613-023-2651-4
-
Insights into the oxidation resistance mechanism and tribological behaviors of multilayered TiSiN/CrVxN hard coatings
2023, vol. 30, no. 12, pp. 2459-2468. doi: 10.1007/s12613-023-2655-0
-
Functionalized carbon dots for corrosion protection: Recent advances and future perspectives
2023, vol. 30, no. 11, pp. 2112-2133. doi: 10.1007/s12613-023-2675-9
-
Corrosion engineering on AlCoCrFeNi high-entropy alloys toward highly efficient electrocatalysts for the oxygen evolution of alkaline seawater
2023, vol. 30, no. 10, pp. 1922-1932. doi: 10.1007/s12613-023-2624-7
-
High-performance triboelectric nanogenerator based on ZrB2/polydimethylsiloxane for metal corrosion protection
2023, vol. 30, no. 10, pp. 1957-1964. doi: 10.1007/s12613-023-2626-5
-
Impact of W alloying on microstructure, mechanical property and corrosion resistance of face-centered cubic high entropy alloys: A review
2023, vol. 30, no. 9, pp. 1667-1679. doi: 10.1007/s12613-023-2641-6
-
Improvement of hydrogen permeation barrier performance by iron sulphide surface films
2023, vol. 30, no. 9, pp. 1792-1800. doi: 10.1007/s12613-022-2593-2
-
Effect of NiO–NiCr2O4 nano-oxides on the microstructural, mechanical and corrosion properties of Ni-coated carbon steel
2023, vol. 30, no. 6, pp. 1078-1092. doi: 10.1007/s12613-022-2584-3
-
Preparation and property of self-sealed plasma electrolytic oxide coating on magnesium alloy
2023, vol. 30, no. 5, pp. 959-969. doi: 10.1007/s12613-022-2542-0
-
Secondary phase precipitate-induced localized corrosion of pure aluminum anode for aluminum–air battery
2023, vol. 30, no. 5, pp. 977-987. doi: 10.1007/s12613-022-2533-1
-
Corrosion resistance and electrical conductivity of V/Ce conversion coating on magnesium alloy AZ31B
2023, vol. 30, no. 4, pp. 653-659. doi: 10.1007/s12613-022-2463-y
-
Corrosion behavior of single- and poly-crystalline dual-phase TiAl–Ti3Al alloy in NaCl solution
2023, vol. 30, no. 4, pp. 689-696. doi: 10.1007/s12613-022-2513-5
-
Effect of Cu addition on the microstructure and tribological performance of Ni60 directional structure coating
2023, vol. 30, no. 4, pp. 715-723. doi: 10.1007/s12613-022-2516-2
-
Influence of deformation on the corrosion behavior of LZ91 Mg–Li alloy
2023, vol. 30, no. 1, pp. 72-81. doi: 10.1007/s12613-022-2466-8
-
Relationship between elements migration of α-AlFeMnSi phase and micro-galvanic corrosion sensitivity of Al–Zn–Mg alloy
2023, vol. 30, no. 1, pp. 112-121. doi: 10.1007/s12613-022-2428-1
-
Tribological performance under different environments of Ti–C–N composite films for marine wear-resistant parts
2023, vol. 30, no. 1, pp. 144-155. doi: 10.1007/s12613-022-2551-z
-
Premature failure induced by non-equilibrium grain-boundary tantalum segregation in air-plasma sprayed ZrO2–YO1.5–TaO2.5 thermal barrier coatings
2022, vol. 29, no. 12, pp. 2189-2200. doi: 10.1007/s12613-021-2394-z
-
Growth kinetics and mechanism of microarc oxidation coating on Ti–6Al–4V alloy in phosphate/silicate electrolyte
2022, vol. 29, no. 11, pp. 1991-1999. doi: 10.1007/s12613-022-2413-8
-
Fe-based amorphous coating prepared using high-velocity oxygen fuel and its corrosion behavior in static lead–bismuth eutectic alloy
2022, vol. 29, no. 11, pp. 2032-2040. doi: 10.1007/s12613-022-2420-9
-
Atmospheric corrosion behavior of Nb- and Sb-added weathering steels exposed to the South China Sea
2022, vol. 29, no. 11, pp. 2041-2052. doi: 10.1007/s12613-021-2383-2
-
Quantitative micro-electrochemical study of duplex stainless steel 2205 in 3.5wt% NaCl solution
2022, vol. 29, no. 11, pp. 2053-2063. doi: 10.1007/s12613-021-2291-5
-
Review of electrodeposition methods for the preparation of high-entropy alloys
2022, vol. 29, no. 9, pp. 1683-1696. doi: 10.1007/s12613-022-2439-y
-
Effect of crystallographic orientation on crack growth behaviour of HSLA steel
2022, vol. 29, no. 8, pp. 1532-1542. doi: 10.1007/s12613-022-2415-6
-
Simultaneously improving mechanical properties and corrosion resistance of as-cast AZ91 Mg alloy by ultrasonic surface rolling
2022, vol. 29, no. 8, pp. 1551-1558. doi: 10.1007/s12613-021-2294-2
-
Role of trace additions of Ca and Sn in improving the corrosion resistance of Mg–3Al–1Zn alloy
2022, vol. 29, no. 8, pp. 1559-1569. doi: 10.1007/s12613-021-2268-4
-
Microstructure evolution and corrosion resistance of AZ31 magnesium alloy tube by stagger spinning
2022, vol. 29, no. 7, pp. 1361-1372. doi: 10.1007/s12613-021-2396-x
-
Review on the phosphate-based conversion coatings of magnesium and its alloys
2022, vol. 29, no. 7, pp. 1435-1452. doi: 10.1007/s12613-022-2419-2
-
Effect of carbonate additive on the microstructure and corrosion resistance of plasma electrolytic oxidation coating on Mg–9Li–3Al alloy
2022, vol. 29, no. 7, pp. 1453-1463. doi: 10.1007/s12613-021-2377-0
-
Stress corrosion cracking behavior of high-strength mooring-chain steel in the SO2-polluted coastal atmosphere
2022, vol. 29, no. 6, pp. 1186-1196. doi: 10.1007/s12613-020-2192-z
-
Influencing factors and mechanism of iodine-induced stress corrosion cracking of zirconium alloy cladding: A review
2022, vol. 29, no. 4, pp. 586-598. doi: 10.1007/s12613-022-2431-6
-
Second phase refining induced optimization of Fe alloying in Zn: Significantly enhanced strengthening effect and corrosion uniformity
2022, vol. 29, no. 4, pp. 796-806. doi: 10.1007/s12613-022-2468-6
-
Data-mining and atmospheric corrosion resistance evaluation of Sn- and Sb-additional low alloy steel based on big data technology
2022, vol. 29, no. 4, pp. 825-835. doi: 10.1007/s12613-022-2457-9
-
Effect of cermet substrate characteristics on the microstructure and properties of TiAlN coatings
2022, vol. 29, no. 3, pp. 547-556. doi: 10.1007/s12613-020-2198-6
-
Effect of cathodic potential on stress corrosion cracking behavior of 21Cr2NiMo steel in simulated seawater
2022, vol. 29, no. 2, pp. 263-270. doi: 10.1007/s12613-020-2199-5
-
Effect of graphene oxide on the corrosion, mechanical and biological properties of Mg-based nanocomposite
2022, vol. 29, no. 2, pp. 305-319. doi: 10.1007/s12613-020-2201-2
-
Incorporation of nano/micron-SiC particles in Ni-based composite coatings towards enhanced mechanical and anti-corrosion properties
2022, vol. 29, no. 1, pp. 153-160. doi: 10.1007/s12613-021-2307-1
-
Effects of strain-induced melt activation treatment on the microstructure and properties of Zn sacrificial anodes
2021, vol. 28, no. 10, pp. 1693-1704. doi: 10.1007/s12613-021-2328-9
-
Electrochemically functionalized graphene as an anti-corrosion reinforcement in Cu matrix composite thin films
2021, vol. 28, no. 9, pp. 1525-1533. doi: 10.1007/s12613-020-2124-y
-
Influence of grain refinement on the corrosion behavior of metallic materials: A review
2021, vol. 28, no. 7, pp. 1112-1126. doi: 10.1007/s12613-021-2308-0
-
Solid particle erosion studies of thermally deposited alumina–titania coatings on an aluminum alloy
2021, vol. 28, no. 7, pp. 1186-1193. doi: 10.1007/s12613-020-2099-8
-
Influencing factors and mechanism of high-temperature oxidation of high-entropy alloys: A review
2021, vol. 28, no. 6, pp. 915-930. doi: 10.1007/s12613-021-2257-7
-
Effect of microstructure on corrosion behavior of high strength martensite steel—A literature review
2021, vol. 28, no. 5, pp. 754-773. doi: 10.1007/s12613-020-2242-6
-
Superior corrosion resistance-dependent laser energy density in (CoCrFeNi)95Nb5 high entropy alloy coating fabricated by laser cladding
2021, vol. 28, no. 5, pp. 888-897. doi: 10.1007/s12613-020-2238-2
-
Electrochemical derusting in molten Na2CO3–K2CO3
2021, vol. 28, no. 4, pp. 637-643. doi: 10.1007/s12613-020-2068-2
-
Corrosion behavior of cold-rolled and post heat-treated 316L stainless steel in 0.9wt% NaCl solution
2021, vol. 28, no. 3, pp. 440-449. doi: 10.1007/s12613-020-2054-8
-
Review of the fatigue behavior of hard coating–ductile substrate systems
2021, vol. 28, no. 1, pp. 46-55. doi: 10.1007/s12613-020-2203-0
-
Erosion-corrosion and its mitigation on the internal surface of the expansion segment of N80 steel tube
2021, vol. 28, no. 1, pp. 98-110. doi: 10.1007/s12613-020-2086-0
-
In vitro bioactivity and corrosion of PLGA/hardystonite composite-coated magnesium-based nanocomposite for implant applications
2021, vol. 28, no. 1, pp. 168-178. doi: 10.1007/s12613-020-2072-6
-
Effect of large load on the wear and corrosion behavior of high-strength EH47 hull steel in 3.5wt% NaCl solution with sand
2020, vol. 27, no. 11, pp. 1525-1535. doi: 10.1007/s12613-020-1978-3
-
Improvement in hot corrosion resistance of dissimilar alloy 825 and AISI 321 CO2-laser weldment by HVOF coating in aggressive salt environment at 900°C
2020, vol. 27, no. 11, pp. 1536-1550. doi: 10.1007/s12613-020-2014-3
-
Protein adsorption, cell viability and corrosion properties of Ti6Al4V alloy treated by plasma oxidation and anodic oxidation
2020, vol. 27, no. 9, pp. 1269-1280. doi: 10.1007/s12613-020-2020-5
-
Surface treatment of titanium dental implant with H2O2 solution
2020, vol. 27, no. 9, pp. 1281-1286. doi: 10.1007/s12613-020-2016-1
-
Microstructure and properties of a wear resistant Al–25Si–4Cu–1Mg coating prepared by supersonic plasma spraying
2020, vol. 27, no. 9, pp. 1287-1294. doi: 10.1007/s12613-019-1950-2
-
Comparative study of mechanical, corrosion and erosion−corrosion properties of cast hyper-duplex and super-duplex stainless steels
2020, vol. 27, no. 7, pp. 954-961. doi: 10.1007/s12613-020-1984-5
-
Stress-corrosion behavior and characteristics of the friction stir welding of an AA2198-T34 alloy
2020, vol. 27, no. 6, pp. 774-782. doi: 10.1007/s12613-019-1924-4
-
Electrodeposition of functionally graded Ni−W/Er2O3 rare earth nanoparticle composite film
2020, vol. 27, no. 6, pp. 818-829. doi: 10.1007/s12613-019-1953-z
-
Chloride resistance of Cr-bearing alloy steels in carbonated concrete pore solutions
2020, vol. 27, no. 4, pp. 494-504. doi: 10.1007/s12613-019-1920-8
-
Influence of glycine additive on corrosion and wear performance of electroplated trivalent chromium coating
2020, vol. 27, no. 4, pp. 544-554. doi: 10.1007/s12613-020-1975-6
-
Effect of cooling temperature on the microstructure and corrosion behavior of X80 pipeline steel
2020, vol. 27, no. 3, pp. 347-353. doi: 10.1007/s12613-019-1882-x
-
Characterization and corrosion studies of ternary Zn–Ni–Sn alloys
2020, vol. 27, no. 1, pp. 74-82. doi: 10.1007/s12613-019-1888-4
Submit Manuscript
E-mail alert
RSS
