SearchSteelmaking and Continuous Casting (2020–2024）
-
Explainable machine learning model for predicting molten steel temperature in the LF refining process
2024, vol. 31, no. 12, pp. 2657-2669. doi: 10.1007/s12613-024-2950-4
-
A simple route for preparation of TRIP-assisted Si–Mn steel with excellent performance using direct strip casting
2024, vol. 31, no. 10, pp. 2173-2181. doi: 10.1007/s12613-023-2818-z
-
Oxygen-assisted zinc recovery from electric arc furnace dust using magnesium chloride
2024, vol. 31, no. 10, pp. 2300-2311. doi: 10.1007/s12613-024-2837-4
-
Critical precipitation behavior of MnTe inclusions in resulfurized steels during solidification
2024, vol. 31, no. 8, pp. 1849-1857. doi: 10.1007/s12613-023-2757-8
-
Evolution of nonmetallic inclusions in 80-t 9CrMoCoB large-scale ingots during electroslag remelting process
2024, vol. 31, no. 7, pp. 1525-1539. doi: 10.1007/s12613-024-2905-9
-
Numerical simulation on the multiphase flow and reoxidation of the molten steel in a two-strand tundish during ladle change
2024, vol. 31, no. 7, pp. 1540-1553. doi: 10.1007/s12613-024-2909-5
-
New steelmaking process based on clean deoxidation technology
2024, vol. 31, no. 6, pp. 1249-1262. doi: 10.1007/s12613-024-2878-8
-
Dissolution behavior of Al2O3 inclusions into CaO–MgO–SiO2–Al2O3–TiO2 system ladle slags
2024, vol. 31, no. 5, pp. 977-987. doi: 10.1007/s12613-023-2817-0
-
Thermodynamic model for deoxidation of liquid steel considering strong metal–oxygen interaction in the quasichemical model framework
2024, vol. 31, no. 5, pp. 988-1002. doi: 10.1007/s12613-023-2766-7
-
Irregular initial solidification by mold thermal monitoring in the continuous casting of steels: A review
2024, vol. 31, no. 5, pp. 1003-1015. doi: 10.1007/s12613-023-2798-z
-
Effect of phosphorus content on interfacial heat transfer and film deposition behavior during the high-temperature simulation of strip casting
2024, vol. 31, no. 5, pp. 1016-1025. doi: 10.1007/s12613-023-2763-x
-
Effects of iron oxide on crystallization behavior and spatial distribution of spinel in stainless steel slag
2024, vol. 31, no. 2, pp. 292-300. doi: 10.1007/s12613-023-2713-7
-
Numerical investigation of sinusoidal pulsating gas intake to intensify the gas–slag momentum transfer in the top-blown smelting furnace
2024, vol. 31, no. 2, pp. 301-314. doi: 10.1007/s12613-023-2705-7
-
Development and prospects of molten steel deoxidation in steelmaking process
2024, vol. 31, no. 1, pp. 18-32. doi: 10.1007/s12613-023-2740-4
-
Hybrid model for BOF oxygen blowing time prediction based on oxygen balance mechanism and deep neural network
2024, vol. 31, no. 1, pp. 106-117. doi: 10.1007/s12613-023-2670-1
-
Formation and control of the surface defect in hypo-peritectic steel during continuous casting: A review
2023, vol. 30, no. 12, pp. 2281-2296. doi: 10.1007/s12613-023-2716-4
-
State of the art in applications of machine learning in steelmaking process modeling
2023, vol. 30, no. 11, pp. 2055-2075. doi: 10.1007/s12613-023-2646-1
-
Hydrometallurgical detoxification and recycling of electric arc furnace dust
2023, vol. 30, no. 11, pp. 2076-2094. doi: 10.1007/s12613-023-2637-2
-
Recent research progress on the phase-field model of microstructural evolution during metal solidification
2023, vol. 30, no. 11, pp. 2095-2111. doi: 10.1007/s12613-023-2710-x
-
Effect of Ca/Mg molar ratio on the calcium-based sorbents
2023, vol. 30, no. 11, pp. 2182-2190. doi: 10.1007/s12613-023-2657-y
-
Waste heat recovery from hot steel slag on the production line: Numerical simulation, validation and industrial test
2023, vol. 30, no. 11, pp. 2191-2199. doi: 10.1007/s12613-023-2660-3
-
Effect of traveling-wave magnetic field on dendrite growth of high-strength steel slab: Industrial trials and numerical simulation
2023, vol. 30, no. 9, pp. 1716-1728. doi: 10.1007/s12613-023-2629-2
-
Dissolution of TiO2 and TiN inclusions in CaO–SiO2–B2O3-based fluorine-free mold flux
2023, vol. 30, no. 9, pp. 1740-1747. doi: 10.1007/s12613-023-2622-9
-
Flow and penetration behavior of submerged side-blown gas
2023, vol. 30, no. 6, pp. 1067-1077. doi: 10.1007/s12613-022-2585-2
-
Effect of gas blowing nozzle angle on multiphase flow and mass transfer during RH refining process
2023, vol. 30, no. 5, pp. 844-856. doi: 10.1007/s12613-022-2558-5
-
Predicting the alloying element yield in a ladle furnace using principal component analysis and deep neural network
2023, vol. 30, no. 2, pp. 335-344. doi: 10.1007/s12613-021-2409-9
-
In situ observation of the dissolution kinetics of Al2O3 particles in CaO–Al2O3–SiO2 slags using laser confocal scanning microscopy
2023, vol. 30, no. 2, pp. 345-353. doi: 10.1007/s12613-021-2347-6
-
Decarbonization options of the iron and steelmaking industry based on a three-dimensional analysis
2023, vol. 30, no. 2, pp. 388-400. doi: 10.1007/s12613-022-2475-7
-
Effect of titanium content on the refinement of coarse columnar austenite grains during the solidification of peritectic steel
2022, vol. 29, no. 12, pp. 2172-2180. doi: 10.1007/s12613-021-2375-2
-
Effect of an external magnetic field on improved electroslag remelting cladding process
2022, vol. 29, no. 8, pp. 1511-1521. doi: 10.1007/s12613-021-2277-3
-
Effect of Al2O3 content on the viscosity and structure of CaO–SiO2–Cr2O3–Al2O3 slags
2022, vol. 29, no. 8, pp. 1522-1531. doi: 10.1007/s12613-021-2306-2
-
Wetting behavior of CaO–Al2O3-based mold flux with various BaO and MgO contents on the steel substrate
2022, vol. 29, no. 6, pp. 1179-1185. doi: 10.1007/s12613-021-2300-8
-
Recycling of ironmaking and steelmaking slags in Japan and China
2022, vol. 29, no. 4, pp. 739-749. doi: 10.1007/s12613-021-2400-5
-
Effect of Al content on the reaction between Fe−10Mn−xAl (x = 0.035wt%, 0.5wt%, 1wt%, and 2wt%) steel and CaO−SiO2−Al2O3−MgO slag
2022, vol. 29, no. 2, pp. 256-262. doi: 10.1007/s12613-021-2298-y
-
Effects of Mg and La on the evolution of inclusions and microstructure in Ca–Ti treated steel
2021, vol. 28, no. 12, pp. 1940-1948. doi: 10.1007/s12613-021-2285-3
-
Shape of slab solidification end under non-uniform cooling and its influence on the central segregation with mechanical soft reduction
2021, vol. 28, no. 11, pp. 1788-1798. doi: 10.1007/s12613-020-2089-x
-
Consideration of green intelligent steel processes and narrow window stability control technology on steel quality
2021, vol. 28, no. 8, pp. 1264-1273. doi: 10.1007/s12613-020-2246-2
-
Operation optimization of the steel manufacturing process: A brief review
2021, vol. 28, no. 8, pp. 1274-1287. doi: 10.1007/s12613-021-2273-7
-
Mn evaporation and denitrification behaviors of molten Mn steel in the vacuum refining with slag process
2021, vol. 28, no. 8, pp. 1288-1297. doi: 10.1007/s12613-021-2311-5
-
Prediction of the Charpy V-notch impact energy of low carbon steel using a shallow neural network and deep learning
2021, vol. 28, no. 8, pp. 1309-1320. doi: 10.1007/s12613-020-2168-z
-
Development of an improved CBR model for predicting steel temperature in ladle furnace refining
2021, vol. 28, no. 8, pp. 1321-1331. doi: 10.1007/s12613-020-2234-6
-
Quantitative evaluation of multi-process collaborative operation in steelmaking–continuous casting sections
2021, vol. 28, no. 8, pp. 1353-1366. doi: 10.1007/s12613-020-2227-5
-
Multi-energy synergistic optimization in steelmaking process based on energy hub concept
2021, vol. 28, no. 8, pp. 1378-1386. doi: 10.1007/s12613-021-2281-7
-
Visualization and simulation of steel metallurgy processes
2021, vol. 28, no. 8, pp. 1387-1396. doi: 10.1007/s12613-021-2283-5
-
Effects of chromium on the microstructure and hot ductility of Nb-microalloyed steel
2021, vol. 28, no. 6, pp. 1011-1021. doi: 10.1007/s12613-020-2092-2
-
Medium-Mn steels for hot forming application in the automotive industry
2021, vol. 28, no. 5, pp. 741-753. doi: 10.1007/s12613-020-2179-9
-
New insights into the properties of high-manganese steel
2021, vol. 28, no. 5, pp. 782-796. doi: 10.1007/s12613-020-2166-1
-
Ultrahigh cycle fatigue fracture mechanism of high-quality bearing steel obtained through different deoxidation methods
2021, vol. 28, no. 5, pp. 804-815. doi: 10.1007/s12613-021-2253-y
-
In-depth analysis of the fatigue mechanism induced by inclusions for high-strength bearing steels
2021, vol. 28, no. 5, pp. 826-834. doi: 10.1007/s12613-020-2223-9
-
Multiphase-field simulation of austenite reversion in medium-Mn steels
2021, vol. 28, no. 5, pp. 847-853. doi: 10.1007/s12613-021-2282-6
-
Effect of Cr/Mn segregation on pearlite–martensite banded structure of high carbon bearing steel
2021, vol. 28, no. 4, pp. 665-675. doi: 10.1007/s12613-020-2035-y
-
Effect of quenching-partitioning treatment on the microstructure, mechanical and abrasive properties of high carbon steel
2021, vol. 28, no. 4, pp. 676-687. doi: 10.1007/s12613-020-2164-3
-
Simulation on scrap melting behavior and carbon diffusion under natural convection
2021, vol. 28, no. 3, pp. 380-389. doi: 10.1007/s12613-020-1997-0
-
Effect of nonmetallic inclusions on localized corrosion of spring steel
2021, vol. 28, no. 3, pp. 390-397. doi: 10.1007/s12613-020-2018-z
-
Effects of operating parameters on the flow field in slab continuous casting molds with narrow widths
2021, vol. 28, no. 2, pp. 238-248. doi: 10.1007/s12613-020-1988-1
-
Review on desulfurization in electroslag remelting
2021, vol. 28, no. 1, pp. 18-29. doi: 10.1007/s12613-020-2075-3
-
Behavior of phosphorus enrichment in dephosphorization slag at low temperature and low basicity
2021, vol. 28, no. 1, pp. 66-75. doi: 10.1007/s12613-020-2036-x
-
A review of carbon dioxide disposal technology in the converter steelmaking process
2020, vol. 27, no. 11, pp. 1421-1429. doi: 10.1007/s12613-020-2065-5
-
Distribution characteristics of inclusions along with the surface sliver defect on the exposed panel of automobile: A quantitative electrolysis method
2020, vol. 27, no. 11, pp. 1489-1498. doi: 10.1007/s12613-020-1973-8
-
Effect of calcium content on inclusions during the ladle furnace refining process of AISI 321 stainless steel
2020, vol. 27, no. 11, pp. 1499-1507. doi: 10.1007/s12613-020-1981-8
-
Temperature-dependent evolution of oxide inclusions during heat treatment of stainless steel with yttrium addition
2020, vol. 27, no. 6, pp. 754-763. doi: 10.1007/s12613-019-1935-1
-
Reaction mechanisms between molten CaF2-based slags and molten 9CrMoCoB steel
2020, vol. 27, no. 5, pp. 611-619. doi: 10.1007/s12613-020-1976-5
-
Model prediction of the effect of in-mold electromagnetic stirring on negative segregation under bloom surface
2020, vol. 27, no. 3, pp. 319-327. doi: 10.1007/s12613-019-1906-6
-
Characteristics of a coherent jet enshrouded in a supersonic fuel gas
2020, vol. 27, no. 2, pp. 173-180. doi: 10.1007/s12613-019-1928-0
Submit Manuscript
E-mail alert
RSS
