SearchMagnesium Alloy (2020–2024)
-
Effect of annealing treatment on the microstructure and mechanical properties of warm-rolled Mg–Zn–Gd–Ca–Mn alloys
2024, vol. 31, no. 10, pp. 2208-2220. doi: 10.1007/s12613-023-2812-5
-
Enhancing corrosion resistance of plasma electrolytic oxidation coatings on AM50 Mg alloy by inhibitor containing Ba(NO3)2 solutions
2024, vol. 31, no. 9, pp. 2048-2061. doi: 10.1007/s12613-024-2876-x
-
Current progress of research on heat-resistant Mg alloys: A review
2024, vol. 31, no. 6, pp. 1406-1425. doi: 10.1007/s12613-023-2802-7
-
Recent progress in the research on magnesium and magnesium alloy foils: A short review
2024, vol. 31, no. 5, pp. 842-854. doi: 10.1007/s12613-024-2846-3
-
Experimental observations on the nonproportional multiaxial ratchetting of cast AZ91 magnesium alloy at room temperature
2024, vol. 31, no. 5, pp. 1115-1125. doi: 10.1007/s12613-024-2827-6
-
Microstructures, corrosion behavior and mechanical properties of as-cast Mg–6Zn–2X(Fe/Cu/Ni) alloys for plugging tool applications
2024, vol. 31, no. 4, pp. 697-711. doi: 10.1007/s12613-023-2775-6
-
Mechanism of microarc oxidation on AZ91D Mg alloy induced by β-Mg17Al12 phase
2024, vol. 31, no. 4, pp. 712-724. doi: 10.1007/s12613-023-2752-0
-
Prediction of the thermal conductivity of Mg–Al–La alloys by CALPHAD method
2024, vol. 31, no. 1, pp. 129-137. doi: 10.1007/s12613-023-2759-6
-
Hot deformation behavior of novel high-strength Mg–0.6Mn–0.5Al–0.5Zn–0.4Ca alloy
2023, vol. 30, no. 12, pp. 2397-2410. doi: 10.1007/s12613-023-2706-6
-
Effect of Zn content on microstructure, mechanical properties and thermal conductivity of extruded Mg–Zn–Ca–Mn alloys
2023, vol. 30, no. 12, pp. 2411-2420. doi: 10.1007/s12613-023-2676-8
-
Surface metal-matrix composites based on AZ91 magnesium alloy via friction stir processing: A review
2023, vol. 30, no. 7, pp. 1278-1296. doi: 10.1007/s12613-022-2589-y
-
Understanding the superior mechanical properties of Mg–3Al–Zn alloy sheets: Role of multi-type unique textures
2023, vol. 30, no. 6, pp. 1104-1112. doi: 10.1007/s12613-023-2603-z
-
Application of g-C3N4/sol–gel nanocomposite on AM60B magnesium alloy and investigation of its properties
2023, vol. 30, no. 6, pp. 1113-1127. doi: 10.1007/s12613-022-2581-6
-
Optimization on microstructure, mechanical properties and damping capacities of duplex structured Mg–8Li–4Zn–1Mn alloys
2023, vol. 30, no. 5, pp. 949-958. doi: 10.1007/s12613-022-2572-7
-
Effects of highly dispersed Ni nanoparticles on the hydrogen storage performance of MgH2
2023, vol. 30, no. 1, pp. 54-62. doi: 10.1007/s12613-022-2510-8
-
Designing new low alloyed Mg–RE alloys with high strength and ductility via high-speed extrusion
2023, vol. 30, no. 1, pp. 82-91. doi: 10.1007/s12613-022-2472-x
-
Tension–compression asymmetry and corresponding deformation mechanism in ZA21 magnesium bars with bimodal structure
2023, vol. 30, no. 1, pp. 92-103. doi: 10.1007/s12613-021-2388-x
-
Effect of potential difference between nano-Al2O3 whisker and Mg matrix on the dispersion of Mg composites
2023, vol. 30, no. 1, pp. 104-111. doi: 10.1007/s12613-022-2550-0
-
Influence of Zr and Mn additions on microstructure and properties of Mg–2.5wt%Cu–Xwt%Zn (X = 2.5, 5 and 6.5) alloys
2022, vol. 29, no. 9, pp. 1733-1745. doi: 10.1007/s12613-021-2369-0
-
Significantly improved hydrogen storage behaviors in MgH2 with Nb nanocatalyst
2022, vol. 29, no. 9, pp. 1788-1797. doi: 10.1007/s12613-021-2303-5
-
Icosahedral quasicrystal structure of the Mg40Zn55Nd5 phase and its thermodynamic stability
2022, vol. 29, no. 8, pp. 1543-1550. doi: 10.1007/s12613-021-2391-2
-
Simultaneously improving mechanical properties and corrosion resistance of as-cast AZ91 Mg alloy by ultrasonic surface rolling
2022, vol. 29, no. 8, pp. 1551-1558. doi: 10.1007/s12613-021-2294-2
-
Role of trace additions of Ca and Sn in improving the corrosion resistance of Mg–3Al–1Zn alloy
2022, vol. 29, no. 8, pp. 1559-1569. doi: 10.1007/s12613-021-2268-4
-
Effects of Nd on microstructure and mechanical properties of as-cast Mg–12Gd–2Zn–xNd–0.4Zr alloys with stacking faults
2022, vol. 29, no. 8, pp. 1570-1577. doi: 10.1007/s12613-021-2264-8
-
Editorial for special issue on developments of magnesium alloys for structural and functional applications
2022, vol. 29, no. 7, pp. 1307-1309. doi: 10.1007/s12613-022-2515-3
-
Effects of runner design and pressurization on the microstructure of a high-pressure die cast Mg–3.0Nd–0.3Zn–0.6Zr alloy
2022, vol. 29, no. 7, pp. 1310-1316. doi: 10.1007/s12613-021-2386-z
-
Revealing the nucleation event of Mg–Al alloy induced by Fe impurity
2022, vol. 29, no. 7, pp. 1317-1321. doi: 10.1007/s12613-021-2406-z
-
Improving the room-temperature bendability of Mg–3Al–1Zn alloy sheet by introducing a bimodal microstructure and the texture re-orientation
2022, vol. 29, no. 7, pp. 1322-1333. doi: 10.1007/s12613-021-2384-1
-
Effect of bending and tension deformation on the texture evolution and stretch formability of Mg–Zn–RE–Zr alloy
2022, vol. 29, no. 7, pp. 1334-1342. doi: 10.1007/s12613-021-2398-8
-
Enhanced mechanical properties of Mg–3Al–1Zn alloy sheets through slope extrusion
2022, vol. 29, no. 7, pp. 1343-1350. doi: 10.1007/s12613-021-2370-7
-
Effect of axial preloading on mechanical behavior during the free-end torsion of an extruded AZ31 magnesium alloy
2022, vol. 29, no. 7, pp. 1351-1360. doi: 10.1007/s12613-022-2417-4
-
Microstructure evolution and corrosion resistance of AZ31 magnesium alloy tube by stagger spinning
2022, vol. 29, no. 7, pp. 1361-1372. doi: 10.1007/s12613-021-2396-x
-
High-temperature mechanical properties of as-extruded AZ80 magnesium alloy at different strain rates
2022, vol. 29, no. 7, pp. 1373-1379. doi: 10.1007/s12613-022-2456-x
-
Effects of Li addition on the microstructure and tensile properties of the extruded Mg–1Zn–xLi alloy
2022, vol. 29, no. 7, pp. 1380-1387. doi: 10.1007/s12613-021-2340-0
-
Optimisation of alloy composition for highly-formable magnesium sheet
2022, vol. 29, no. 7, pp. 1388-1395. doi: 10.1007/s12613-021-2365-4
-
Low-cost and high-strength Mg−Al−Ca−Zn−Mn wrought alloy with balanced ductility
2022, vol. 29, no. 7, pp. 1396-1405. doi: 10.1007/s12613-021-2395-y
-
Fabrication and performance of 3D co-continuous magnesium composites reinforced with Ti2AlNx MAX phase
2022, vol. 29, no. 7, pp. 1406-1412. doi: 10.1007/s12613-022-2427-2
-
Utilization of surface nanocrystalline to improve the bendability of AZ31 Mg alloy sheet
2022, vol. 29, no. 7, pp. 1413-1424. doi: 10.1007/s12613-022-2414-7
-
Tribological behaviors of graphene oxide partly substituted with nano-SiO2 as lubricant additives in water for magnesium alloy/steel interfaces
2022, vol. 29, no. 7, pp. 1425-1434. doi: 10.1007/s12613-022-2465-9
-
Review on the phosphate-based conversion coatings of magnesium and its alloys
2022, vol. 29, no. 7, pp. 1435-1452. doi: 10.1007/s12613-022-2419-2
-
Effect of carbonate additive on the microstructure and corrosion resistance of plasma electrolytic oxidation coating on Mg–9Li–3Al alloy
2022, vol. 29, no. 7, pp. 1453-1463. doi: 10.1007/s12613-021-2377-0
-
Constructing graphene nanosheet-supported FeOOH nanodots for hydrogen storage of MgH2
2022, vol. 29, no. 7, pp. 1464-1473. doi: 10.1007/s12613-021-2393-0
-
Interfacial bonding characteristics and mechanical properties of H68/AZ31B clad plate
2022, vol. 29, no. 6, pp. 1237-1248. doi: 10.1007/s12613-020-2240-8
-
A review of the strengthening–toughening behavior and mechanisms of advanced structural materials by multifield coupling treatment
2022, vol. 29, no. 2, pp. 185-199. doi: 10.1007/s12613-021-2350-y
-
Effect of graphene oxide on the corrosion, mechanical and biological properties of Mg-based nanocomposite
2022, vol. 29, no. 2, pp. 305-319. doi: 10.1007/s12613-020-2201-2
-
High thermal conductivity and high strength magnesium alloy for high pressure die casting ultrathin-walled components
2022, vol. 29, no. 1, pp. 88-96. doi: 10.1007/s12613-021-2318-y
-
Discharge properties of Mg–Sn–Y alloys as anodes for Mg-air batteries
2021, vol. 28, no. 10, pp. 1705-1715. doi: 10.1007/s12613-021-2258-6
-
Review on cyclic plasticity of magnesium alloys: Experiments and constitutive models
2021, vol. 28, no. 4, pp. 567-589. doi: 10.1007/s12613-020-2216-8
-
Effect of tool plunge depth on the microstructure and fracture behavior of refill friction stir spot welded AZ91 magnesium alloy joints
2021, vol. 28, no. 4, pp. 699-709. doi: 10.1007/s12613-020-2044-x
-
In vitro bioactivity and corrosion of PLGA/hardystonite composite-coated magnesium-based nanocomposite for implant applications
2021, vol. 28, no. 1, pp. 168-178. doi: 10.1007/s12613-020-2072-6
-
A comparative study between friction stir processing and friction stir vibration processing to develop magnesium surface nanocomposites
2020, vol. 27, no. 8, pp. 1133-1146. doi: 10.1007/s12613-020-1993-4
-
Developing Mg–Zn surface alloy by friction surface allosying: In vitro degradation studies in simulated body fluids
2020, vol. 27, no. 7, pp. 962-969. doi: 10.1007/s12613-020-2053-9
-
Biodegradable magnesium-matrix composites: A review
2020, vol. 27, no. 6, pp. 724-744. doi: 10.1007/s12613-020-1987-2
-
Mechanical characterization of Mg−B4C nanocomposite fabricated at different strain rates
2020, vol. 27, no. 2, pp. 252-263. doi: 10.1007/s12613-019-1902-x
Submit Manuscript
E-mail alert
RSS
