Effects of ultrasonic vibration on plastic deformation of AZ31 during the tensile process

Tong Wen, Li Wei, Xia Chen, Chun-lei Pei

分享

计量
  • 文章访问数:  341
  • HTML全文浏览量:  82
  • PDF下载量:  16
  • 被引次数: 0

目录

    Cite this article as:

    Tong Wen, Li Wei, Xia Chen, and Chun-lei Pei, Effects of ultrasonic vibration on plastic deformation of AZ31 during the tensile process, Int. J. Miner. Metall. Mater., 18(2011), No. 1, pp.70-76. https://dx.doi.org/10.1007/s12613-011-0402-4
    Tong Wen, Li Wei, Xia Chen, and Chun-lei Pei, Effects of ultrasonic vibration on plastic deformation of AZ31 during the tensile process, Int. J. Miner. Metall. Mater., 18(2011), No. 1, pp.70-76. https://dx.doi.org/10.1007/s12613-011-0402-4
    引用本文 PDF XML SpringerLink

    Effects of ultrasonic vibration on plastic deformation of AZ31 during the tensile process

    基金项目: 

    This work was financially supported by the Natural Science Foundation Project of Chongqing Science and Technology Commission, China (No.2009BB4186).

      通信作者:

      Tong Wen E-mail: tonywen68@hotmail.com

    An investigation on the plastic behavior of AZ31 magnesium alloy under ultrasonic vibration (with a frequency of 15 kHz and a maximum output of 2 kW) during the process of tension at room temperature was conducted to reveal the volume effect of the vibrated plastic deformation of AZ31. The characteristics of mechanical properties and microstructures of AZ31 under routine and vibrated tensile processes with different amplitudes were compared. It is found that ultrasonic vibration has a remarkable influence on the plastic behavior of AZ31 which can be summarized into two opposite aspects: the softening effect which reduces the flow resistance and improves the plasticity, and the hardening effect which decreases the formability. When a lower amplitude or vibration energy is applied to the tensile sample, the softening effect dominates, leading to a decrease of AZ31 deformation resistance with an increase of formability. Under the application of a high-vibrating amplitude, the hardening effect dominates, resulting in the decline of plasticity and brittle fracture of the samples.

     

    Effects of ultrasonic vibration on plastic deformation of AZ31 during the tensile process

    Author Affilications
    • Funds: 

      This work was financially supported by the Natural Science Foundation Project of Chongqing Science and Technology Commission, China (No.2009BB4186).

    • Received: 10 January 2010; Revised: 16 February 2010; Accepted: 22 February 2010;
    An investigation on the plastic behavior of AZ31 magnesium alloy under ultrasonic vibration (with a frequency of 15 kHz and a maximum output of 2 kW) during the process of tension at room temperature was conducted to reveal the volume effect of the vibrated plastic deformation of AZ31. The characteristics of mechanical properties and microstructures of AZ31 under routine and vibrated tensile processes with different amplitudes were compared. It is found that ultrasonic vibration has a remarkable influence on the plastic behavior of AZ31 which can be summarized into two opposite aspects: the softening effect which reduces the flow resistance and improves the plasticity, and the hardening effect which decreases the formability. When a lower amplitude or vibration energy is applied to the tensile sample, the softening effect dominates, leading to a decrease of AZ31 deformation resistance with an increase of formability. Under the application of a high-vibrating amplitude, the hardening effect dominates, resulting in the decline of plasticity and brittle fracture of the samples.

     

    Relative Articles

    M. Sarkari Khorrami, M. Kazeminezhad, Y. Miyashita, A. H. Kokabi. Improvement in the mechanical properties of Al/SiC nanocomposites fabricated by severe plastic deformation and friction stir processing [J]. 矿物冶金与材料学报(英文版). DOI: 10.1007/s12613-017-1408-3

    View details

    Gheorghe Gurau, Carmela Gurau, Vedamanickam Sampath, Leandru Gheorghe Bujoreanu. Investigations of a nanostructured FeMnSi shape memory alloy produced via severe plastic deformation [J]. 矿物冶金与材料学报(英文版). DOI: 10.1007/s12613-016-1353-6

    View details

    Yang Li, Gui-yong Xiao, Lu-bin Chen, Yu-peng Lu. Acoustic emission study of the plastic deformation of quenched and partitioned 35CrMnSiA steel [J]. 矿物冶金与材料学报(英文版). DOI: 10.1007/s12613-014-1027-1

    View details

    Yong-sheng Wang, Guo-jian Hao, Jun-pin Lin. Tensile and compressive behavior of Ti-based bulk metallic glass composites [J]. 矿物冶金与材料学报(英文版). DOI: 10.1007/s12613-013-0769-5

    View details

    Guo-wei Chang, Shu-ying Chen, Qing-chun Li, Xu-dong Yue, Yi-hui Qi. Research of {0001} crystal orientation for magnesium alloys solidified in a fashion of cellular crystals [J]. 矿物冶金与材料学报(英文版). DOI: 10.1007/s12613-012-0528-z

    View details

    Ping Yang, Li-na Wang, Qing-ge Xie, Ji-zhong Li, Hua Ding, Lin-lin Lu. Influence of deformation on precipitation in AZ80 magnesium alloy [J]. 矿物冶金与材料学报(英文版). DOI: 10.1007/s12613-011-0444-7

    View details

    Ping-jun Tao, Yuan-zheng Yang, Xiao-jun Bai, Zhi-wei Xie, Xian-chao Chen. Room temperature plastic deformation behavior of ZrCuNiAl bulk metallic glasses [J]. 矿物冶金与材料学报(英文版). DOI: 10.1007/s12613-010-0313-9

    View details

    Zonghai Ding, Pavel Huml. Influence of stress path change on the resistance to plastic deformation of cold rolled sheets [J]. 矿物冶金与材料学报(英文版).

    View details

    /

    返回文章
    返回