留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码
Volume 18 Issue 6
Dec.  2011
数据统计

分享

计量
  • 文章访问数:  385
  • HTML全文浏览量:  91
  • PDF下载量:  12
  • 被引次数: 0
Hong-bin Tan, Preparation of long alumina fibers by sol-gel method using tartaric acid, Int. J. Miner. Metall. Mater., 18(2011), No. 6, pp. 691-694. https://doi.org/10.1007/s12613-011-0498-6
Cite this article as:
Hong-bin Tan, Preparation of long alumina fibers by sol-gel method using tartaric acid, Int. J. Miner. Metall. Mater., 18(2011), No. 6, pp. 691-694. https://doi.org/10.1007/s12613-011-0498-6
引用本文 PDF XML SpringerLink

Preparation of long alumina fibers by sol-gel method using tartaric acid

  • 通讯作者:

    Hong-bin Tan    E-mail: hb-t@163.com

  • Long alumina fibers were prepared by sol-gel method. The spinning sol was obtained by mixing aluminum nitrate, tartaric acid, and polyvinylpyrrolidone with a mass ratio of 10:3:1.5. Thermogravimetry-differential scanning calorimetry (TG-DSC), Fourier transform infrared (FT-IR) spectra, X-ray diffraction (XRD), and scanning electron microscopy (SEM) were used to characterize the properties of the gel and ceramic fibers. A little of α-Al2O3 phase is observed in the alumina precursor gel fibers sintered at 1273 K. The fibers with a uniform diameter can be obtained when sintered at 1473 K, and its main phase is also indentified as α-Al2O3.
  • Preparation of long alumina fibers by sol-gel method using tartaric acid

    + Author Affiliations
    • Long alumina fibers were prepared by sol-gel method. The spinning sol was obtained by mixing aluminum nitrate, tartaric acid, and polyvinylpyrrolidone with a mass ratio of 10:3:1.5. Thermogravimetry-differential scanning calorimetry (TG-DSC), Fourier transform infrared (FT-IR) spectra, X-ray diffraction (XRD), and scanning electron microscopy (SEM) were used to characterize the properties of the gel and ceramic fibers. A little of α-Al2O3 phase is observed in the alumina precursor gel fibers sintered at 1273 K. The fibers with a uniform diameter can be obtained when sintered at 1473 K, and its main phase is also indentified as α-Al2O3.
    • loading

    Catalog


    • /

      返回文章
      返回